Yayınlar & Eserler

Yayın Ağı
Makaleler 44
Tümü (44)
SCI-E, SSCI, AHCI (32)
SCI-E, SSCI, AHCI, ESCI (37)
ESCI (5)
Scopus (33)
TRDizin (6)
Diğer Yayınlar (4)

1. Effect of Calcium Oxide on Stress Crack Resistance and Light Transmittance in PET Container for Packaging Carbonated Beverages

Yuvalı G., Dağaşan Bulucu E., Demirel B., Yaraş A., Akkurt F., Sürdem S., et al.
ACS OMEGA , cilt.1, sa.1, ss.1, 2024 (SCI-Expanded, Scopus)

2. Recycling selective laser melting alloy powder on cobalt chromium-to-ceramic bond strength

ALBAYRAK H., Ayata M., DEMİREL B.
JOURNAL OF PROSTHETIC DENTISTRY , cilt.130, sa.5, 2023 (SCI-Expanded, Scopus) Creative Commons License identifier identifier identifier

3. Optimization of zinc borate, aluminum hydroxide and magnesium hydroxide composition in composite material used in the production of halogen-free flame retardant sheath material for electrical cables

Yildirim S., Eren O., Cetinkaya M. K., Gurek M., Demirel B.
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.26, sa.3, ss.1111-1119, 2023 (ESCI, TRDizin) Creative Commons License identifier identifier

4. PP Fiber Reinforced Rigid Polyurethane Foam Composites: Effects of Fiber Type, Content and Length on Mechanical Performance

Demirel B., Aslantaş H., Akkurt F., Yaraş A., Daver F.
Düzce Üniversitesi Bilim ve Teknoloji Dergisi , cilt.11, sa.3, ss.1327-1340, 2023 (TRDizin) Creative Commons License

5. Effect of extrusion on Ni55.5Mn25Ga18.5Mo2 shape memory Heusler alloy

Dal S., Eskil M., Demirel B.
Materials Today Communications , cilt.34, 2023 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

6. Effect of Sb and In additives on thermal and electrical properties of Sn-9Zn-4Bi alternative lead-free solder alloy

Esener P. A., DEMİREL B., Aksoz S.
MATERIALS CHEMISTRY AND PHYSICS , cilt.296, 2023 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

7. Thermal conversion behavior of paper mill sludge: characterization, kinetic, and thermodynamic analyses

Yaras A., Demirel B., Akkurt F., Arslanoglu H.
Biomass Conversion and Biorefinery , cilt.13, sa.3, ss.2007-2016, 2023 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

8. Investigation of the mechanical properties of calcite reinforced polypropylene by using digimat-mean field homogenization and ansys FEM

Yıldırım F., Demirel B., Bulucu E.
Materials Today Communications , cilt.33, 2022 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

9. Carbonation sludge reinforced LDPE composites: flame-retardant, dynamic mechanical properties, thermal degradation behaviors

YARAŞ A., DEMİREL B., AKKURT F., Arslanoglu H.
POLYMER BULLETIN , cilt.79, sa.8, ss.6475-6496, 2022 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

10. Tribological, thermal, dynamic and mechanical characteristics of low density polyethylene composites with iron scale

Bayraktar G., Demirel B., Yaraş A., Akkurt F., Özkan D., Er Y.
MATERIALS TODAY COMMUNICATIONS , cilt.32, sa.1, ss.1-12, 2022 (SCI-Expanded, Scopus) Creative Commons License

11. Effects of magnesium borate on the mechanical performance, thermal and chemical degradation of polyethylene terephthalate packaging material

Demirel B., Kılıç E., Yaraş A., Akkurt F., Daver F., Uğur Gezer D.
JOURNAL OF PLASTIC FILM AND SHEETING , cilt.0, sa.0, ss.1-19, 2022 (SCI-Expanded, Scopus) identifier identifier

12. Determination of The Best Injection Stretch Blow Molding Process Parameters in Polyethylene Terephthalate Bottle Service Performance

Demirel B., Akkurt F., Uysal İ. A., Şenyiğit E.
GAZI UNIVERSITY JOURNAL OF SCIENCE , cilt.35, sa.4, ss.1297-1316, 2022 (ESCI, Scopus, TRDizin) Creative Commons License identifier identifier

13. Investigation of mechanical and tribological properties of different grain size iron scale reinforced polymer composite

Kursuncu B., Erdogan A., Gok M. S., DEMİREL B.
POLYMERS & POLYMER COMPOSITES , cilt.29, sa.9, ss.1543-1550, 2021 (SCI-Expanded, Scopus) identifier identifier

14. Confirmation of the experimentally measured cooling time of Polyethylene Terephthalate (PET) melt by ANSYS and FORTRAN

Demirel B., Danacı M., Akkurt F., Yaraş A.
Balıkesir Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.23, sa.2, ss.819-830, 2021 (TRDizin)

15. Synthesis of Gd+3 doped hydroxyapatite ceramics: optical, thermal and electrical properties

Demirel B., Saban E., Yaras A., Akkurt F.
JOURNAL OF ASIAN CERAMIC SOCIETIES , cilt.9, sa.3, ss.865-873, 2021 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

16. Chemical, thermal, and mechanical properties and ultraviolet transmittance of novel nano-hydroxyapatite/polyethylene terephthalate milk bottles

DEMİREL B., Inaner N. B., Gezer D. U., Daver F., Yaras A., AKKURT F.
POLYMER ENGINEERING AND SCIENCE , cilt.61, sa.7, ss.2043-2054, 2021 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

17. Confirmation of the experimentally measured cooling time of Polyethylene Terephthalate (PET) melt by ANSYS and FORTRAN

Demirel B., Danacı M., Akkurt F., Yaraş A.
Balıkesir Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.1, sa.1, ss.1, 2021 (TRDizin)

18. The effects of homogenization time on the crystal structure and hardness of NiMnGaMo alloy

Dal S., DEMİREL B., Eskil M.
Engineering Science and Technology, an International Journal , cilt.24, ss.493-502, 2021 (SCI-Expanded, Scopus) identifier identifier

19. Mechanical and tribological properties of waste iron scale reinforced polypropylene composite

Erdogan A., Gok M. S., Kursuncu B., Kiraz T., DEMİREL B.
INDUSTRIAL LUBRICATION AND TRIBOLOGY , cilt.73, sa.2, ss.388-395, 2021 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

20. Investigation of mechanical and thermal properties of nano SiO2/hydrophobic silica aerogel co-doped concrete with thermal insulation properties

Al Zaidi I. K., Demirel B., Atiş C. D., Akkurt F.
STRUCTURAL CONCRETE , cilt.21, sa.3, ss.1123-1133, 2020 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

21. Kalsiyum Boratlı Antibakteriyel Sırların Hazırlanması ve Antibakteriyel Özelliklerinin İncelenmesi

DEMİREL B., ÇITAK E., YUVALI ÇELİK G., AKKURT F.
Nevşehir Bilim ve Teknoloji Dergisi , ss.31-38, 2020 (Hakemli Dergi)

22. Halojen İçermeyen, Alev Geciktirici Polimer Matrisli Kompozit Üretiminde Ekstrüder Çalışmalarının Yanma Üzerine Etkisi

DEMİREL B., YILDIRIM S.
Nevşehir Bilim ve Teknoloji Dergisi , ss.90-97, 2020 (Hakemli Dergi)

23. Material selection on countermeasure flares systems by multi criteria decision making methods

Şenyiğit E., Demirel B.
International Journal of Multidisciplinary Studies and Innovative Technologies , cilt.4, sa.1, ss.1-9, 2020 (Hakemli Dergi)

24. Effect of different storage methods on thermal and mechanical properties of mortar containing aerogel, fly ash and nano-silica

Al Zaidi A. K. A., DEMİREL B., ATİŞ C. D.
CONSTRUCTION AND BUILDING MATERIALS , cilt.199, ss.501-507, 2019 (SCI-Expanded, Scopus) identifier identifier

25. OPTIMIZING THE COMPOSITION OF ELECTROPLATED NiCrAl COMPOSITE COATING

OSKAY K. O., DEMİREL B.
SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES-SIGMA MUHENDISLIK VE FEN BILIMLERI DERGISI , cilt.36, sa.3, ss.795-802, 2018 (ESCI) identifier

26. THE SELECTION OF MATERIAL IN DENTAL IMPLANT WITH ENTROPY BASED SIMPLE ADDITIVE WEIGHTING AND ANALYTIC HIERARCHY PROCESS METHODS

ŞENYİĞİT E., DEMİREL B.
SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES-SIGMA MUHENDISLIK VE FEN BILIMLERI DERGISI , cilt.36, sa.3, ss.731-740, 2018 (ESCI) identifier

27. An Oxidation Study of NiCoCrAl Coatings Produced by Electrolytic co-Deposition Method

Oskay K. O., DEMİREL B.
ACTA PHYSICA POLONICA A , cilt.134, sa.1, ss.186-188, 2018 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

28. Optimization of Electrophoretic Deposition of YSZ

Oskay K. O., DEMİREL B.
ACTA PHYSICA POLONICA A , cilt.134, sa.1, ss.182-185, 2018 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

29. DETERMINATION OF THE MATERIAL FOR THE CARBONATED SOFT DRINK PACKAGING WITH MULTI-CRITERIA DECISION MAKING METHODS

ŞENYİĞİT E., DEMİREL B.
SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES-SIGMA MUHENDISLIK VE FEN BILIMLERI DERGISI , cilt.35, sa.3, ss.471-480, 2017 (ESCI) identifier

30. Optimisation of mould surface temperature and bottle residence time in mould for the carbonated soft drink PET containers

DEMİREL B.
POLYMER TESTING , cilt.60, ss.220-228, 2017 (SCI-Expanded, Scopus) identifier identifier

31. Effect of shot peening on the oxidation behavior of thermal barrier coatings

Karaoglanli A. C., Döleker K. M., Demirel B., Türk A., Varol R.
APPLIED SURFACE SCIENCE , cilt.354, ss.314-322, 2015 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

32. The Investigation and Growth Kinetics of TiC Coatings on AISI D3 Steel Produced by Thermo-Reactive Diffusion Technique

Kurt B., SINOPLU O., Carboga C., DEMİREL B.
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY , cilt.51, sa.2, ss.95-106, 2014 (SCI-Expanded, Scopus) identifier identifier

33. Characterization and Kinetics of VC Coatings on AISI D3 Steel Performed by Thermo-Reactive Diffusion Technique

Kurt B., Onder E., Carboga C., DEMİREL B.
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY , cilt.51, sa.1, ss.32-44, 2014 (SCI-Expanded, Scopus) identifier identifier

34. Experimental study of preform reheat temperature in two-stage injection stretch blow molding

DEMİREL B., Daver F.
POLYMER ENGINEERING AND SCIENCE , cilt.53, sa.4, ss.868-873, 2013 (SCI-Expanded, Scopus) identifier identifier

35. Optimization of the composite brick composed of expanded polystyrene and pumice blocks

Demirel B.
CONSTRUCTION AND BUILDING MATERIALS , cilt.40, ss.306-313, 2013 (SCI-Expanded, Scopus) identifier identifier

36. Growth Kinetics of CrC Coating Layers on AISI D3 Obtained by Thermo-Reactive Diffusion Technique

Kurt B., Onder E., Carboga C., Demirel B., Karagoz M.
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY , cilt.50, sa.11, ss.754-766, 2013 (SCI-Expanded, Scopus) identifier identifier

37. Investigation of the telluric effects arising along the cathodically protected natural gas pipeline between Karadeniz Eregli and Duzce

DEMİREL B., Yalcin H.
TURKISH JOURNAL OF ELECTRICAL ENGINEERING AND COMPUTER SCIENCES , cilt.21, sa.3, ss.758-765, 2013 (SCI-Expanded, Scopus, TRDizin) identifier identifier

38. Effects of preform deformation behavior on the properties of the poly(ethylene terephthalate) bottles

DEMİREL B., Daver F.
JOURNAL OF APPLIED POLYMER SCIENCE , cilt.126, sa.4, ss.1300-1306, 2012 (SCI-Expanded, Scopus) identifier identifier

39. A simulation study of the effect of preform cooling time in injection stretch blow molding

Daver F., DEMİREL B.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.212, sa.11, ss.2400-2405, 2012 (SCI-Expanded, Scopus) identifier identifier

40. An integrative simulation approach to weight reduction in Polyethylene terephthalate) bottles

Daver F., DEMİREL B., Sutanto J., Pang C. W.
JOURNAL OF APPLIED POLYMER SCIENCE , cilt.133, 2012 (SCI-Expanded, Scopus)

41. A novel UV-emitting phosphor: Li6CaB3O8.5:Pb2+

PEKGOZLU I., ERDOGMUS E., DEMİREL B., GOK M., KARABULUT H., BASAK A. S.
JOURNAL OF LUMINESCENCE , cilt.131, sa.11, ss.2290-2293, 2011 (SCI-Expanded, Scopus) identifier identifier

42. Crystallization behavior of PET materials

Demirel B., Yaras A., Elcıcek H.
BAÜ Fen Bil. Enst. Dergisi , cilt.13, sa.1, ss.26-35, 2011 (Hakemli Dergi)

43. The Effects on the Properties of PET Bottles of Changes to Bottle-Base Geometry

Demirel B., Daver F.
JOURNAL OF APPLIED POLYMER SCIENCE , cilt.114, sa.6, ss.3811-3818, 2009 (SCI-Expanded, Scopus) identifier identifier

44. Optimization of Poly(ethylene terephthalate) Bottles Via Numerical Modeling: A Statistical Design of Experiment Approach

Demirel B., Daver F.
JOURNAL OF APPLIED POLYMER SCIENCE , cilt.114, sa.2, ss.1126-1132, 2009 (SCI-Expanded, Scopus) identifier identifier
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 79

1. Uçak Burun Tekerleği Jantı Tasarımında Kullanılacak Malzemenin Çok Kriterli Karar Verme Teknikleri ile Belirlenmesi

HALİMOĞLU Ö. M., ŞENYİĞİT E., DEMİREL B.
II. INSAC Uluslararası Doğa ve Mühendislik Bilimleri Kongresi, Konya, Türkiye, 21 Ekim 2021, sa.1, (Tam Metin Bildiri)

2. BWM-TOPSIS ÇOK KRİTERLİ KARAR VERME YÖNTEMİ İLE SAVUNMA SANAYİ İÇİN TANK PALETI TASARIMINDA EN İYİ MALZEMENİN SEÇİMİ

Şenyiğit E., Demirel B., Gökkuş Ö.
30 Ağustos Bilimsel Araştırmalar Kongresi, Adana, Türkiye, 28 - 30 Ağustos 2020, (Tam Metin Bildiri)

3. BWM-SAW YÖNTEMI ILE SAVUNMA SANAYISINDE TANK ZIRHLARI IÇIN KULLANILACAK EN İYİ MALZEMENİN SEÇİMİ

ŞENYİĞİT E., DEMİREL B., GÖKKUŞ Ö.
30 Ağustos Bilimsel Araştırmalar Kongresi, 28 - 30 Ağustos 2020, (Tam Metin Bildiri)

4. ASKERİ AMAÇLI TRENLERDE KUPLÖR MERKEZLEME PİMİ TASARIMINDA EN İYİ MALZEMENİN SEÇİMİ

DEMİREL B., ŞENYİĞİT E., GÖKKUŞ Ö., YURTGÜLÜ N.
3. ULUSLARARASI BİLİM, TEKNOLOJİ VE SOSYAL BİLİMLERDE GÜNCEL GELİŞMELER SEMPOZYUMU, 19 - 20 Haziran 2020, sa.1, (Tam Metin Bildiri)

5. PREPARATION OF ANTIBACTERIAL GLAZES WITH CALCIUM BORATE AND INVESTIGATION OF IT’s ANTIBACTERIAL PROPERTIES

ÇITAK E., DEMİREL B., YUVALI ÇELİK G., AKKURT F.
4. International Conference on Material Science and Technology in Kızılcahamam/ANKARA(IMSTEC 2019), 18 - 20 Ekim 2019, (Tam Metin Bildiri)

6. EFFECT OF EXTRUDER STUDIES ON COMBUSTION IN THE PRODUCTION OF HALOGEN-FREE, FLAME RETARDANT POLYMER MATRIX COMPOSITE PRODUCTION

YILDIRIM S., DEMİREL B.
4. International Conference on Material Science and Technology in Kızılcahamam/ANKARA(IMSTEC 2019, 18 - 20 Ekim 2019, (Tam Metin Bildiri)

7. VARIATION OF ORDER PARAMETER WITH TEMPERATURE FOR LIQUID CRYSTALS DOPED WITH DYE AND NANOPARTICLE

AKKURT F., DEMİREL B.
4. International Conference on Material Science and Technology in Kızılcahamam/ANKARA(IMSTEC 2019), 18 - 20 Ekim 2019, (Tam Metin Bildiri)

8. CURRENT-VOLTAGE CHARACTERISTISC OF FULLERENE DOPED LIQUID CRYSTALS

AKKURT F., DEMİREL B.
4. International Conference on Material Science and Technology in Kızılcahamam/ANKARA(IMSTEC 2019, 18 - 20 Ekim 2019, (Tam Metin Bildiri)

9. THE SELECTION OF MATERIAL TO USE IN DENTAL DENTAL PROSTHESIS DESIGN

DEMİREL B., ŞENYİĞİT E., DEMİRKOL N., NERGİZ K., KILIÇ O. C., AKKURT F.
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia/TURKEY (IMSMATEC’19), 21 - 23 Haziran 2019, (Tam Metin Bildiri)

10. EFFECTS OF HEAT TREATMENT ON MICROSTRUCTURE AND MICROHARDNESS OF NiMnGaMo SHAPE MEMORY ALLOY

DAL S., DEMİREL B., ESKİL M.
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia/TURKEY (IMSMATEC’19), 21 - 23 Haziran 2019, (Tam Metin Bildiri)

11. INVESTIGATION OF MECHANICAL PROPERTIES OF PARTICULATE REINFORCED POLYMER MATRIX COMPOSITES BY FINITE ELEMENT METHOD

Demirel B., Yıldırım F.
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia/TURKEY (IMSMATEC’19), Nevşehir, Türkiye, 21 - 23 Haziran 2019, (Tam Metin Bildiri)

12. THE SELECTION OF MATERIAL TO USE IN BRAKE DISK DESIGN

DEMİREL B., ŞENYİĞİT E., AKKURT F.
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia/TURKEY (IMSMATEC’19), 21 - 23 Haziran 2019, (Tam Metin Bildiri)

13. THE SELECTION OF MATERIAL TO USE IN BALLISTIC VEST DESIGN

DEMİREL B., ŞENYİĞİT E., KARAKAYA C., ÖZTÜRK Ö., UMAY B., ENGÜR M.
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia/TURKEY (IMSMATEC’19), 21 - 23 Haziran 2019, (Tam Metin Bildiri)

14. THE SELECTION OF MATERIAL TO USE IN AIRPLANE BATTERY DESIGN

DEMİREL B., ŞENYİĞİT E., AKKURT F.
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia/TURKEY (IMSMATEC’19), 21 - 23 Haziran 2019, (Tam Metin Bildiri)

15. BEST MATERIAL SELECTION FOR NOVEL AIRPLANE BATTERY BOX

Demirel B., Şenyiğit E., Akkurt F.
The International Conference on Material Science, Mechanical and Automotive Engineers and Technology in Cappadocia/NEVŞEHİR (IMSMATEC’19), Nevşehir, Türkiye, 21 - 23 Haziran 2019, (Tam Metin Bildiri)

16. INVESTIGATION OF BEST MATERIAL FOR BRAKE DISCS WITH MULTI CRITERIA DECISION MAKING METHODS

Demirel B., Şenyiğit E., Akkurt F.
The International Conference on Material Science, Mechanical and Automotive Engineers and Technology in Cappadocia/NEVŞEHİR (IMSMATEC’19), Nevşehir, Türkiye, 21 - 23 Haziran 2019, (Tam Metin Bildiri)

17. Investigation of Ballistic Behaviours of Kevlar and Boron Fiberon Helmet Design by Ansys

DEMİREL B., ŞENYİĞİT E., ÖZTÜRK A. C., İNANER N. B., ŞAHİN S. S., AKKURT F.
International Symposium on Boron, 17 - 19 Nisan 2019, (Tam Metin Bildiri)

18. KEVLAR VE BOR ELYAF MALZEMELERİNİN KASK MODELLEMESİ İLE BALİSTİK DAVRANIŞLARININ ANSYS PROGRAMI İLE İNCELENMESİ

Demirel B., Şenyiğit E., Öztürk A. C., Burhan N., Şahin S. S., Akkurt F.
Uluslararası Bor Sempozyumu (BORON2019), Nevşehir, Türkiye, 17 - 19 Nisan 2019, cilt.1, sa.1, ss.210-216, (Tam Metin Bildiri)

19. Mechanical Properties of Fiber Reinforced Composite Rigid Polyurethane Foam Materials

ASLANTAŞ H., DEMİREL B.
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, 10 - 12 Nisan 2018, (Özet Bildiri)

20. COMPARISON OF INDIVIDUAL BEHAVIORS OF HFFR AND PVC SHEET MATERIALS

KARLITEPE CETINKAYA M., GUREK M., DOGAN N., DEMİREL B.
The International Conference on Material Science and Technology in Cappadocia(IMSTEC 2018), 17 Eylül - 19 Nisan 2018, (Tam Metin Bildiri)

21. THE SELECTION OF THE BEST MATERIAL FOR PLANE WING PIN

ŞENYİĞİT E., DEMİREL B., CENGIZ U., OZDEMIR O., HACIPASAOGLU F.
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, 10 - 12 Nisan 2018, (Tam Metin Bildiri)

22. BEST MATERIAL SELECTION FOR HELMET DESIGN

DEMİREL B., ŞENYİĞİT E., TUFAN M., AKKURT F.
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, 10 Nisan 2018, (Tam Metin Bildiri)

23. BEST MATERIAL SELECTION FOR CHAFF/FLARE LUNCH SYSTEM

Demirel B., Şenyiğit E., Bekırcan O., Ozkan S., Baktır S.
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, Nevşehir, Türkiye, 10 - 12 Nisan 2018, (Tam Metin Bildiri)

24. OPTIMIZATION OF ISBM PROCESS PARAMETERS ENSURING THE BEST SERVICE PERFORMANCE FOR THE 1 LT. PET BOTTLE PRODUCTION: A STATISTICAL DESIGN OF EXPERIMENT APPROACH

Demirel B., Akkurt F., Adevıye A.
THE INTERNATINONAL CONFERENCE ON MATERIALS SCIENCE MECHANICAL AND AUTOMOTIVE ENGINEERINGS AND TECHNOLOGY IN ÇEŞME/İZMİR (IMSMATEC’18), İzmir, Türkiye, 10 - 12 Nisan 2018, (Özet Bildiri) Creative Commons License

25. MODELING AND SIMULATION OF PARTICULATE REINFORCED POLYMER MATRIX COMPOSITES

YILDIRIM F., DEMİREL B., AKKURT F.
The International Conference on Material Science and Technology in Cappadocia(IMSTEC 2018), 17 Eylül - 19 Nisan 2018, (Tam Metin Bildiri)

26. INVESTIGATION OF THERMAL, ELECTRICAL AND MECHANICAL PROPERTIES OF LEAD FREE SOLDER ALLOYS

ESENER P. A., DEMİREL B., AKKURT F.
The International Conference on Material Science and Technology in Cappadocia(IMSTEC 2018), 17 Eylül - 19 Nisan 2018, (Tam Metin Bildiri)

27. SHAPE MEMORY ALLOYS PRODUCTION METHODS

DEMİREL B., KURT B., BAYRAKTAR G.
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, 10 - 12 Nisan 2018, (Özet Bildiri)

28. SELECTION OF MATERIALS FOR BATTLE SHIP’S PROPELLER DESIGN

Demirel B., Şenyiğit E., Akar M., Basol S., Karabulut M. A.
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in ÇEŞME, Nevşehir, Türkiye, 10 - 12 Nisan 2018, (Tam Metin Bildiri)

29. IMROVING BRAKING PERFORMANCE BY USING COMPOSITE MATERIALS THAT HAVE CERAMIC MATRISES AND COOLING THIS BRAKING PARTS WITH A TURBINE COOLING SYSTEM

DEMİREL B., ŞENYİĞİT E., AYDIN G., DEMIR S., SEFERTAS O.
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, 10 - 12 Nisan 2018, (Tam Metin Bildiri)

30. THE ROLE OF DEGASSING ON CROSSLINKING BY-PRODUCTS IN XLPE INSULATED CABLES

MISIRLI N., GÜREK M., GÜRBÜZ M., DEMİREL B.
IMSTEC 2018, 11 - 13 Ekim 2018, (Özet Bildiri)

31. MICRO-CRACKING PROBLEM IN NiMn SHAPE MEMORY ALLOYS

Dal S., Demirel B.
3nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’18), September 17-19, 2018, Nevsehir, Turkey, Nevşehir, Türkiye, 17 - 19 Ekim 2018, ss.140-142, (Tam Metin Bildiri)

32. PHASE TRANSFORMATIONS ON NiMn BASED SHAPE MEMORY ALLOYS

Eskil M., Dal S., Kurt B., Aldaş K., Demirel B.
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in ÇEŞME/İZMİR (IMSMATEC’18), April 10-12 2018, İzmir, Türkiye, 10 - 12 Nisan 2018, ss.31-34, (Tam Metin Bildiri)

33. SHAPE MEMORY NiMnGaX ALLOYS TRANSFORMING AT HIGH TEMPERATURES

Dal S., Demirel B.
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in ÇEŞME/İZMİR (IMSMATEC’18), April 10-12 2018, İzmir, Türkiye, 10 - 12 Nisan 2018, ss.602, (Özet Bildiri)

34. SYNTHESIS AND CHARACTERIZATION OF NiMn BASED SHAPE MEMORY ALLOYS

Eskil M., Dal S., Kurt B., Aldaş K., Demirel B.
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in ÇEŞME/İZMİR (IMSMATEC’18), April 10-12 2018, Nevşehir, Türkiye, 10 - 12 Nisan 2018, ss.65-68, (Tam Metin Bildiri)

35. 1.2379 SOĞUK İŞ TAKIM ÇELİKLERİNDE ISIL İŞLEM ÇALIŞMALARI

UNSALAN N., KARACA Y., ÇARBOĞA C., DEMİREL B., DAĞAŞAN BULUCU E.
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in ÇEŞME, 10 - 12 Nisan 2018, (Tam Metin Bildiri)

36. SYNTHESIS AND CHARACTERIZATION OF NIMN BASED SHAPE MEMORY ALLOYS

ESKIL M., DAL S., KURT B., ALDAS K., DEMİREL B.
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, İzmir, Türkiye, 10 - 12 Nisan 2018, ss.65-68, (Tam Metin Bildiri)

37. SELECTION OF MATERIALS FOR BATTLE SHIP'S PROPELLER DESIGN

DEMİREL B., ŞENYİĞİT E., AKAR M., BASOL S., KARABULUT M. A.
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, İzmir, Türkiye, 10 - 12 Nisan 2018, ss.601, (Tam Metin Bildiri)

38. 1.2379 HEAT TREATMENT IN COLD WORK TOOL STEELS 1.2379 SOĞUK İŞ TAKIM ÇELİKLERİNDE ISIL İŞLEM ÇALIŞMALARI

UNSALAN N., KARACA Y., CARBOĞA C., DEMİREL B., DAGASAN BULUCU E.
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, İzmir, Türkiye, 10 - 12 Nisan 2018, ss.592, (Özet Bildiri)

39. SHAPE MEMORY NiMnGaX ALLOYS TRANSFORMING AT HIGH TEMPERATURES

DAL S., DEMİREL B.
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, İzmir, Türkiye, 10 - 12 Nisan 2018, ss.602, (Özet Bildiri)

40. WHEEL RIM DESIGN

DEMİREL B., AKKURT F., AYKIR F., KARA S. G., YAŞAR H. D., VATANSEVER B.
The International Conference on Material Science and Technology in Cappadocia(IMSTEC 2017), 11 - 13 Ekim 2017, (Özet Bildiri)

41. CATALYTIC CONVERTERS

DEMİREL B., AKKURT F., DOĞAN M. S., ŞAFAK Y., TAN M.
The International Conference on Material Science and Technology in Cappadocia(IMSTEC 2017), 11 - 13 Ekim 2017, (Özet Bildiri)

42. SELECTION OF MATERIAL TO USE IN DENTAL IMPLANT DESIGN

DEMİREL B., ŞENYİĞİT E., YILDIRIM S., VURAL M., ÇİL O., SARIUÇAK M.
The International Conference on Material Science and Technology in Cappadocia(IMSTEC 2017), 11 - 13 Ekim 2017, (Özet Bildiri)

43. MATERIAL SELECTION TO USE IN SPOILER DESIGN BY MULTI-CRITERIA DECISION METHOD

Demirel B., Şenyiğit E., Nursena U., Seerkan K., Fehim S., Emre Can Ş.
The International Conference on Material Science and Technology in Cappadocia(IMSTEC 2017), Nevşehir, Türkiye, 11 - 13 Ekim 2017, (Özet Bildiri)

44. BALL BEARING DESIGN ACCORDING TO MATERIAL TYPE

DEMİREL B., AKKURT F., BOZBIYIK G., TOSUN D., TATLI G., GÜRKÖK S.
The International Conference on Material Science and Technology in Cappadocia(IMSTEC 2017), 11 - 13 Ekim 2017, (Tam Metin Bildiri)

45. OPTIMIZATION OF HIP PROTHESIS

Demirel B., Akkurt F., Pehlivanlı B., Erdem M., Ördek K.
The International Conference on Material Science and Technology in Cappadocia(IMSTEC 2017), Nevşehir, Türkiye, 11 - 13 Ekim 2017, (Tam Metin Bildiri)

46. IMPROVEMENT OF DESIGN AND PROPERTIES OF INSULATION BRICK

DEMİREL B., AKKURT F., AKBAŞ A. Ş., YILMAZ S., ARDAHANLILAR Y. C., YURTSEVEN E.
The International Conference on Material Science and Technology in Cappadocia(IMSTEC 2017), 11 - 13 Ekim 2017, (Özet Bildiri)

47. THE SELECTION OF MATERIAL TO USE IN SAVONIUS TYPE WIND TURBINE DESIGN BY ANALYTIC HIERARCHY PROCESS METHOD

DEMİREL B., ŞENYİĞİT E., KIZILTAN Ç., ÖZTÜRK M., YARIŞ E. Ş., SARIUÇAK M.
The International Conference on Material Science and Technology in Cappadocia(IMSTEC 2017), 11 - 13 Ekim 2017, cilt.1, ss.294, (Özet Bildiri)

48. OPTIMIZATION OF HIP PROTHESIS

Demirel B., Akkurt F., Pehlıvanlı B., Erdem M., Ordek K.
The International Conference on Material Science and Technology in Cappadocia(IMSTEC 2017), Nevşehir, Türkiye, 11 - 13 Ekim 2017, ss.94, (Tam Metin Bildiri)

49. THE SELECTION OF MATERIAL TO USE IN SPOILER DESIGN BY MULTI-CRITERIA DECISION METHOD

DEMİREL B., ŞENYİĞİT E., ULUER N., KILICTEK S., SARUHAN F. F., SİMSEK E. C.
The International Conference on Material Science and Technology in Cappadocia(IMSTEC 2017), Nevşehir, Türkiye, 11 - 13 Ekim 2017, ss.308, (Özet Bildiri)

50. Improve Super Thermal Insulation of Light Concrete Blocks Using Aerogel and Enhanced By Nano Silica

El Zaidi I., DEMİREL B., ATİŞ C. D.
The International Conference on Material Science and Technology in Cappadocia(IMSTEC 2017), 11 - 13 Ekim 2017, ss.650, (Özet Bildiri)

51. Comparison and study of the effect of different storage methods on the thermal insulation and mechanical properties of light blocks with hydrophobic silica aerogel and fly ash

El Zaidi I., DEMİREL B., ATİŞ C. D.
The International Conference on Material Science and Technology in Cappadocia(IMSTEC 2017, 11 - 13 Ekim 2017, ss.646, (Özet Bildiri)

52. Effect of Boron Addition on Microstructure and Corrosion Properties of CrMo Steels

ÇARBOĞA C., KURT B., DEMİREL B., SUN Y., AHLATCI H., ÇEVİK E.
3rd International IronSteel Symposium, 3 - 05 Nisan 2017, ss.355, (Özet Bildiri)

53. Effect of addition of boron on corrosion resistance of AISI 1040

ÇARBOĞA C., KURT B., DAL S., DEMİREL B., SUN Y., AHLATCI H.
ICOCEE – CAPPADOCIA 2017, 8 - 10 Mayıs 2017, (Özet Bildiri)

54. Effect of addition of boron on corrosion resistance of AISI 8620(21CrNi5)

ÇARBOĞA C., KURT B., DAL S., DEMİREL B., SUN Y., AHLATCI H.
ICOCEE – CAPPADOCIA 2017, 8 - 10 Mayıs 2017, cilt.1603, (Özet Bildiri)

55. AN OXIDATION STUDY OF NiCoCrAl COATINGS PRODUCED BY ELECTROLYTIC CO-DEPOSITION METHOD

OSKAY K. O., DEMİREL B.
APMAS 2017, 22 - 26 Nisan 2017, (Özet Bildiri)

56. Optimization of electropherotic deposition of YSZ

OSKAY K. O., DEMİREL B.
APMAS 2017, 22 - 26 Nisan 2017, (Özet Bildiri)

57. GGG70 DÖKME DEMİR YÜZEYİNİN KUTU SEMENTASYON TEKNİĞİ İLE TiC KAPLANARAK KAPLAMA TABASI MİKROYAPISININ İNCELENMESİ

KURT B., ASGAROV K., Günay B., DEMİREL B.
International Conference on Material Science and Technology in Cappadocia (IMSTEC’16), 6 - 08 Nisan 2016, (Tam Metin Bildiri)

58. KUTU SEMENTASYON TEKNİĞİ İLE CRVC KAPLANMIŞ AISI D2 SOĞUK İŞ TAKIM ÇELİĞİNİN MİKROYAPISININ İNCELENMESİ

KURT B., KANCA E., GÜNEN A., DEMİREL B.
International Conference on Material Science and Technology in Cappadocia, 6 - 08 Nisan 2016, (Tam Metin Bildiri)

59. A NOVEL APPLICATION OF EXPANDED POLYSTYRENE EPS FOAM AS ROOF COVERING MATERIAL

DEMİREL B., nuray a.
International Conference on Material Science and Technology in Cappadocia, 6 - 08 Nisan 2016, (Tam Metin Bildiri)

60. THICKNESS OPTIMIZATION OF THERMAL BARRIER COATING OF A DIESEL PISTON BY STATISTICAL TESTING DESIGN SOFTWARE ECHIP

DEMİREL B., Sağlam A., Hepbiçer F., Kocatürk Ö.
International Conference on Material Science and Technology in Cappadocia, 6 - 08 Nisan 2016, (Tam Metin Bildiri)

61. The effects of uniform preform surface temperature on the final properties of the 1.5 lt carbonated soft drink PET bottle

DEMİREL B., Daver F., YARAS A., KILIC E.
International Conference on Material Science and Technology in Cappadocia, Nevşehir, Türkiye, 6 - 08 Nisan 2016, ss.1, (Tam Metin Bildiri)

62. INFLUENCE OF BI 3 ADDITION ON LUMINESCENT INTENSITY OF SrB2O4

DEMİREL B.
International Conference on Material Science and Technology in Cappadocia, 6 - 08 Nisan 2016, (Tam Metin Bildiri)

63. AISI 4140 ÇELİĞİNİN YÜZEYİNİN CRVC KAPLANANARAK KAPLAMA TABAKASI MİKROYAPISININ İNCELENMESİ

KURT B., Carboğa C., DEMİREL B., Umur H.
International Conference on Material Science and Technology in Cappadocia, 6 - 08 Nisan 2016, (Tam Metin Bildiri)

64. Sıcak Dolum Için Borpet

DAYAN S., ÖZPOZAN N., DEMİREL B.
Türkiye İnovasyon Haftası, Türkiye, 4 - 06 Aralık 2014, (Özet Bildiri)

65. Sıcak Dolum için "BORPET"

DAYAN S., ÖZPOZAN N., DEMİREL B.
Türkiye İnovasyon Haftası, İstanbul, Türkiye, 4 - 06 Aralık 2014, (Tam Metin Bildiri)

66. SICAK DOLUM ve ŞİŞELEME İÇİN “BORPET”

DAYAN S., DEMİREL B., ÖZPOZAN N.
4. KİMYA ARGE PROJE PAZARI, İstanbul, Türkiye, 01 Kasım 2014, (Tam Metin Bildiri)

67. Effect of Shot Peening on the Oxidation Behaviour of Thermal Barrier Coatings

KARAOĞLANLI A. C., DEMİREL B., TÜRK A., VAROL R., DÖLEKER K. M.
30. European Conference on Surface Science, 31 Ağustos - 05 Eylül 2014, (Tam Metin Bildiri)

68. Microstructure Investigation of High Rate Boron Added 1020 Steel Joined by Gas Metal Arc Welding Technique

carboga c., KURT B., DAL S., DEMİREL B.
International Conference on Welding Technologies and Exhibition, 21 - 23 Mayıs 2014, sa.1, (Tam Metin Bildiri)

69. The Effect of Heat Treatment on Different Ratio Boron Added AISI 8620 21CrNi5 Cementation Steels

carboga c., KURT B., DAL S., DEMİREL B.
The International Advances in Applied Physics and Materials Science Congress and Exhibition, 24 - 27 Nisan 2014, (Tam Metin Bildiri)

70. Microstructure Investigation of Micro Alloy Boron Added AISI 1010 Steel Joined by Gas Metal Arc Welding Technique

carboga c., KURT B., DAL S., DEMİREL B.
International Conference on Welding Technologies and Exhibition, 24 - 27 Nisan 2014, (Tam Metin Bildiri)

71. The Effect of Heat Treatment on Different Ratios Boron Added AISI 1040 Steel

carboğa c., KURT B., DAL S., DEMİREL B.
The International Advances in Applied Physics and Materials Science Congress and Exhibition, 24 - 27 Nisan 2014, sa.1, (Tam Metin Bildiri)

72. An energy saving approach in the manufacture of carbonated soft drink bottles

DEMİREL B., Daver F.
Evolving Energy The IEF International Energy Congress, Avustralya, 1 - 04 Kasım 2012, cilt.49, ss.280-286, (Tam Metin Bildiri)

73. Corrosion problems and cathodic protection applications in navy industry

ELCICEK H., DEMİREL B., KARAOGLANLI C.
Conference Proceedings, 6th International Advanced Technologies Symposium, Türkiye, 1 - 04 Haziran 2011, cilt.1, ss.95, (Tam Metin Bildiri)

74. Simulation of stress in the base of the PET bottles under different processing conditions

DEMİREL B., Daver F., YARAS A.
Conference Proceedings, 6th International Advanced Technologies Symposium, Türkiye, 1 - 04 Mayıs 2011, cilt.1, ss.35, (Tam Metin Bildiri)

75. Usage of composite materials in the marine and yacht industry?, Conference Proceedings

ELCICEK H., KARAOGLANLI C., DEMİREL B.
4th Engineering and Technology symposium, Ankara, Türkiye, 1 - 04 Mayıs 2011, cilt.1, ss.597, (Tam Metin Bildiri)

76. Light weight PET bottles: A simulation study

Daver F., Wei P. C., DEMİREL B.
Conference Proceedings, SPE, ANTEC, 2010, Amerika Birleşik Devletleri, 1 - 04 Haziran 2010, cilt.1, ss.95, (Tam Metin Bildiri)

77. The optimization of petaloid base dimensions and operating conditions for injection stretch blow moulded PET bottles

DEMİREL B., Daver F., Kosior E.
Conference Proceedings, 24th Annual Meeting of the Polymer Processing Society, (PPS-24), İtalya, 1 - 04 Nisan 2008, cilt.1, ss.65, (Tam Metin Bildiri)

78. Petaloid bases of PET bottles: Design and process optimization against environmental stress cracking

DEMİREL B., Daver F., Kosior E.
Conference Proceedings, SPE ANTEC, 2007, Amerika Birleşik Devletleri, 1 - 04 Haziran 2007, ss.2159, (Tam Metin Bildiri)

79. OPTIMUM DESIGN OF PET BOTTLE BASES AGAINST STRESS CRACKING

DEMİREL B., Daver F., Kosior E.
Conference Proceedings, 23rd Annual Meeting of the Polymer Processing Society, (PPS-23), Brezilya, 1 - 04 Mayıs 2007, ss.27, (Tam Metin Bildiri)
Kitaplar 2

1. KRİSTALLOGRAFİ

Demirel B.
Ekin Yayınevi, Bursa, 2019

2. KATI HALE GİRİŞ

GOYMEN G., DEMİREL B.
Gazi Kitapevi Yayınları, Ankara, 2013
Metrikler

Yayın

130

Yayın (WoS)

39

Yayın (Scopus)

36

Atıf (WoS)

367

H-İndeks (WoS)

9

Atıf (Scopus)

462

H-İndeks (Scopus)

11

Atıf (Scholar)

1139

H-İndeks (Scholar)

15

Atıf (Diğer Toplam)

6

Proje

34

Fikri Mülkiyet

7

Tez Danışmanlığı

18

Açık Erişim

53
BM Sürdürülebilir Kalkınma Amaçları