Yayınlar

Makaleler

Neural network-based prediction of mechanical properties in high-strength fly ash-based geopolymer mortars: a comparative analysis of model architectures and optimizers

Khan M. M. H., Khaleel D., Khaleel F., Al-Hadeethi B., Al-Somaydaii J. A., Afan H. A., et al.
Ain Shams Engineering Journal, cilt.17, sa.1, 2026 (SCI-Expanded, Scopus) identifier identifier identifier

Recycled concrete aggregates in geopolymer mortars: Performance and environmental assessment

Durak U., Bayram U.
Construction and Building Materials, cilt.505, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier

Exploring the post-thermal exposure effects on mechanical and microstructural properties of alkali-activated polypropylene fiber-reinforced mortars

Sertbakan R. G., Atabey İ. İ., DURAK U., İLKENTAPAR S., Öztürk Z. B., KARAHAN O., et al.
STRUCTURAL CONCRETE, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

Artificial intelligence-driven models for predicting mechanical properties of low-emission microwave-cured geopolymer mortar

Khaleel F., Afan H. A., AbdUlameer A. H., Abdullah A. S., KAPLAN G., ATİŞ C. D.
Engineering Applications of Artificial Intelligence, cilt.156, 2025 (SCI-Expanded, Scopus) identifier

Properties of lightweight one-part geopolymer mortars containing pumice aggregates: mechanical, microstructure, and life cycle assessment

Geldim R. A., Orklemez E., Ketema A. F., Paka B. A. H., İLKENTAPAR S., DURAK U., et al.
EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING, 2025 (SCI-Expanded, Scopus) identifier

Düzlem Gerilme Sonlu Elemanı Kullanılarak Uzun ve Kısa Konsol Kiriş ile Küp Yarma Deneyi Problemlerinin Numerik İncelenmesi

ATİŞ C. D., Yılmaz Z. N., Durak F. K., ÖRKLEMEZ E., KILINÇ M., YILMAZ F., et al.
Enginoscope, cilt.1, sa.2, ss.83-94, 2025 (Hakemli Dergi)

Evaluation of diatomite substitute with thermal power plant waste fly ash in sustainable geopolymer through life cycle assessment

İlkentapar S., Orklemez E., Durak U., Gulcimen S., Bayram S., Uzal N., et al.
JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT, cilt.27, sa.3, ss.1418-1435, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

Influence of Silica Fume on the Mechanical and Microstructural Properties and Life Cycle Assessment of Fly Ash-Based Geopolymer Mortar

Ergeshov Z., Orklemez E., Ketema A. F., Kwami M. I. A., İLKENTAPAR S., DURAK U., et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

A comparative investigation on the freeze–thaw resistance between dry-cured alkali-activated fly ash/slag and portland cement mortars

Luga E., Mustafaraj E., Corradi M., Atiş C. D.
Journal of Building Pathology and Rehabilitation, cilt.10, sa.2, ss.1-10, 2025 (Hakemli Dergi)

Sürdürülebilir Geopolimer Harçların Yaşam Döngüsü ve Mekanik Özelliklerinin Değerlendirilmesi: Farklı Senaryolar Üzerine Bir Çalışma

ÖRKLEMEZ E., Paka B. A. H., Ceylan A., İLKENTAPAR S., DURAK U., KARAHAN O., et al.
Enginoscope, cilt.1, sa.1, ss.44-59, 2025 (Hakemli Dergi) Sürdürülebilir Kalkınma

Physical Mechanical and Microstructural Properties of Kaolin-Based Fly Ash-Added Geopolymer Mortars

KAYA M., İLKENTAPAR S., DURAK U., Atabey İ. İ., Çelikten S.
Iranian Journal of Science and Technology - Transactions of Civil Engineering, cilt.48, sa.5, ss.3559-3572, 2024 (SCI-Expanded, Scopus) identifier identifier

Alkali-Activated Binders as Sustainable Alternatives to Portland Cement and Their Resistance to Saline Water

Luga E., Mustafaraj E., Corradi M., ATİŞ C. D.
MATERIALS, cilt.17, sa.17, 2024 (SCI-Expanded, Scopus) identifier identifier identifier

A novel strategy to avoid local optimum: Army-inspired genetic algorithm (AIGA)

KILINÇ M., ATILGAN E., ATİŞ C. D.
Turkish Journal of Engineering, cilt.8, sa.3, ss.436-446, 2024 (Scopus, TRDizin) identifier identifier

Characterizing boron-enhanced one-part alkaline-activated mortars: Mechanical properties, microstructure and environmental impacts

Örklemez E., İLKENTAPAR S., DURAK U., Gülçimen S., Uzal N., Uzal B., et al.
CONSTRUCTION AND BUILDING MATERIALS, cilt.426, 2024 (SCI-Expanded, Scopus) identifier identifier

Reaction kinetics and properties of pumice-based geopolymer systems cured at room temperature

Kucukyildirim E., Yorulmaz H., Durak U., İlkentapar S., Uzal B., Karahan O., et al.
CONSTRUCTION AND BUILDING MATERIALS, cilt.409, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

Rough-AHP and MOORA-based Taguchi Optimization for Mixture Proportion of Building Concrete

Himmetoğlu S., Kızılkaya Aydoğan E., Ozcan F., Karahan O., Atiş C. D.
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, cilt.26, ss.1307-1317, 2023 (ESCI, TRDizin) identifier identifier

Rough-AHP and MOORA-based Taguchi optimization for mixture proportion of building concrete

HİMMETOĞLU S., KIZILKAYA AYDOĞAN E., ÖZCAN F., KARAHAN O., ATİŞ C. D.
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, cilt.26, sa.4, ss.1307-1317, 2023 (ESCI, TRDizin)

Recycling waste expanded polystyrene as aggregate in production of lightweight screed mortar

ÇELİKTEN S., ATABEY İ. İ., ALMAZ ÖZCAN Z., DURAK U., İLKENTAPAR S., KARAHAN O., et al.
REVISTA DE LA CONSTRUCCION, cilt.22, sa.3, ss.581-596, 2023 (SCI-Expanded, Scopus)

Effect of Nano-SiO<sub>2</sub> on Strength and Hydration Characteristics of Ternary Cementitious Systems

Yorulmaz H., Uzal B., Karahan O., Durak U., İlkentapar S., Atiş C. D.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, cilt.48, sa.10, ss.13649-13660, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Effect of addition diatomite powder on mechanical strength, elevated temperature resistance and microstructural properties of industrial waste fly ash-based geopolymer

Özsoy A., Örklemez E., İlkentapar S.
Journal of Material Cycles and Waste Management, cilt.25, sa.4, ss.2338-2349, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

Effect of Nano-SiO2 on Strength and Hydration Characteristics of Ternary Cementitious Systems

Yorulmaz H., Uzal B., Karahan O., Durak U., İlkentapar S., Atiş C. D.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, sa.48, ss.13649-13660, 2023 (SCI-Expanded)

Influence of Silica Fume Additive and Activator Ratio on Mechanical Properties in Slaked Lime-Based Alkali-Activated Mortars

KAYA M., KARAHAN O., ATİŞ C. D.
IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING, cilt.47, sa.2, ss.873-889, 2023 (SCI-Expanded, Scopus) identifier identifier

Properties of fly ash-based lightweight-geopolymer mortars containing perlite aggregates: Mechanical, microstructure, and thermal conductivity coefficient

Karakas H., İLKENTAPAR S., DURAK U., Orklemez E., Ozuzun S., KARAHAN O., et al.
CONSTRUCTION AND BUILDING MATERIALS, cilt.362, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

Geri Dönüştürülmüş Atık EPSnin Yüksek Dayanımlı Hafif Şap Üretiminde Kullanımının Araştırılması

ATABEY İ. İ., Almaz Özcan Z., İLKENTAPAR S., DURAK U., KARAHAN O., ATİŞ C. D.
Düzce Üniversitesi Bilim ve Teknoloji Dergisi, cilt.11, ss.288-301, 2023 (TRDizin) identifier

Synergistic effect of waste glass powder and fly ash on some properties of mortar and notably suppressing alkali-silica reaction

Goksen Y., Durak U., İlkentapar S., Atabey I. I., Kaya M., Karahan O., et al.
REVISTA DE LA CONSTRUCCION, cilt.22, sa.2, ss.419-430, 2023 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

The improvement of strength and microstructural properties of fly ash-based geopolymer by adding elemental aluminum powder

DURAK U.
JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT, cilt.25, sa.1, ss.157-170, 2023 (SCI-Expanded, Scopus) identifier identifier

Comparison of Lightweight Screed Containing EPS and Normal Screed Applications

Kılıç F. M., YORULMAZ H., Özuzun S., DURAK U., İLKENTAPAR S., KARAHAN O., et al.
Environmental Research & Technology, cilt.5, sa.4, ss.289-295, 2022 (Scopus, TRDizin) identifier identifier

Mechanical properties and efficiency of SIFCON samples at elevated temperature cured with standard and accelerated method

Ali M. H., ATİŞ C. D., Al-Kamaki Y. S. S.
CASE STUDIES IN CONSTRUCTION MATERIALS, cilt.17, 2022 (SCI-Expanded, Scopus) identifier identifier

Alkali ile Aktive Edilmiş Cüruf ve Uçucu Kül Harçlarına Yüksek Sıcaklık Sonrası Hava Kürünün Etkisi

Sertbakan R. G., ATABEY İ. İ., DURAK U., İLKENTAPAR S., KARAHAN O., ATİŞ C. D.
Düzce Üniversitesi Bilim ve Teknoloji Dergisi, cilt.10, ss.114-126, 2022 (TRDizin)

DİATOMİT İKAMESİNİN GEOPOLİMER HARÇLARIN MEKANİK ÖZELLİKLERİNE VE YÜKSEK SICAKLIK DİRENÇLERİNE ETKİSİNİN İNCELENMESİ

İlkentapar S., Örklemez E.
JOURNAL OF INSTITUTE OF ECONOMIC DEVELOPMENT AND SOCIAL RESEARCHES, cilt.8, sa.32, ss.1-16, 2022 (Hakemli Dergi) Sürdürülebilir Kalkınma

The influence of cement kiln dust on strength and durability properties of cement-based systems

Hakkomaz H., Yorulmaz H., Durak U., İlkentapar S., Karahan O., Atiş C. D.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH, cilt.29, sa.50, ss.76166-76175, 2022 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier identifier

EPS VE ATIK POLİÜRETAN İLE ÜRETİLMİŞ HAFİF HARÇLARIN MEKANİK ÖZELLİKLERİNİN, ISI GEÇİRİMLİLİK ÖZELLİKLERİNİN VE YÜKSEK SICAKLIĞA KARŞI DİRENÇLERİNİN KARŞILAŞTIRILMASI

Durak U., İlkentapar S., Eren H.
Mühendislik Bilimleri ve Tasarım Dergisi, cilt.10, sa.2, ss.360-370, 2022 (TRDizin) Sürdürülebilir Kalkınma

Uçucu Kül ve Yüksek Fırın Cürufu Temelli Geopolimer Sistemlerde Atık Demir Tozunun Agrega Yerine Kullanımının Araştırılması

Durak U., Şimşek A. A.
Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi (Online), cilt.5, sa.2, ss.812-828, 2022 (TRDizin) Sürdürülebilir Kalkınma

Flexural Tensile Strength Measurement and Determination for Kerbstones with Unsymmetrical Section

ATİŞ C. D., ABDILAHI A., İLKENTAPAR S., DURAK U., KARAHAN O.
Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi, cilt.26, sa.1, ss.63-68, 2022 (TRDizin) identifier

Examination of mechanical properties and microstructure of alkali activated slag and slag-metakaolin blends exposed to high temperatures

Akcaozoglu S., Ciflikli M., Bozkaya O., ATİŞ C. D., Ulu C.
STRUCTURAL CONCRETE, cilt.23, sa.2, ss.1273-1289, 2022 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

Effect of short-term elevated temperature curing on strength properties and microstructure of fresh fly ash geopolymer mortar

DURAK U.
ARABIAN JOURNAL OF GEOSCIENCES, cilt.15, sa.810, ss.1-11, 2022 (SCI-Expanded, Scopus)

Investigation of mechanical properties, high-temperature resistance and microstructural properties of diatomite-containing geopolymer mortars

İLKENTAPAR S., Ozsoy A.
ARABIAN JOURNAL OF GEOSCIENCES, cilt.15, sa.6, 2022 (SCI-Expanded, Scopus) identifier

Farklı Hacimlerdeki Uçucu Külün Isı İle Kürlenen Hava Sürükleyici Katkılı Çimento Harçlarına Etkisi

ÖZTÜRK O., Ali O. A., KESKİN Ü. S., ATİŞ C. D.
Erciyes Üniversitesi Fen Bilimleri Enstitüsü Dergisi, cilt.38, sa.2, ss.280-291, 2022 (TRDizin)

Freeze-thaw resistance of blast furnace slag alkali activated mortars

BİNGÖL Ş., BİLİM C., ATİŞ C. D., DURAK U.
Turkish Journal of Engineering, cilt.6, sa.1, ss.63-66, 2022 (Scopus, TRDizin) identifier identifier

FREEZE-THAW RESISTANCE OF BLAST FURNACE SLAG GEOPOLYMER MORTARS

BİNGÖL Ş., BİLİM C., ATİŞ C. D., DURAK U.
Turkish Journal of Engineering, cilt.6, sa.1, ss.63-66, 2022 (Scopus, TRDizin) Sürdürülebilir Kalkınma identifier identifier

Alkali ile Aktive Edilmiş EPS İkameli Harçların Mekanik Özelliklerinin, Isı Geçirimlilik Özelliklerinin ve Yüksek Sıcaklığa Karşı Dirençlerinin Araştırılması

Eren H., İlkentapar S., Durak U.
Bitlis Eren Üniversitesi Fen Bilimleri Dergisi, cilt.10, sa.4, ss.1515-1526, 2021 (TRDizin) Sürdürülebilir Kalkınma

EFFECTS OF DRY PARTICLE COATING WITH NANO- AND MICROPARTICLES ON EARLY COMPRESSIVE STRENGTH OF PORTLAND CEMENT PASTES

Yorulmaz H., Özuzun S., Uzal B., İlkentapar S., Durak U., Karahan O., et al.
Challenge Journal of Concrete Research Letters, cilt.12, sa.4, ss.125-130, 2021 (Scopus, TRDizin) identifier identifier

Silindirik beton numunelerde boy/çap oranı değişiminin basınç dayanımına etkisi

Durak U.
Niğde Üniversitesi Mühendislik Bilimleri Dergisi, cilt.1, sa.1, ss.1-6, 2021 (TRDizin)

A new parameter influencing the reaction kinetics and properties of fly ash based geopolymers: A pre-rest period before heat curing

Durak U., İlkentapar S., Karahan O., Uzal B., Atiş C. D.
JOURNAL OF BUILDING ENGINEERING, cilt.35, 2021 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

Compressive strength prediction models for cementitious composites with fly ash using machine learning techniques

Sevim U. K., Bilgic H. H., Cansiz O. F., Ozturk M., ATİŞ C. D.
CONSTRUCTION AND BUILDING MATERIALS, cilt.271, 2021 (SCI-Expanded, Scopus) identifier identifier

EPS İle İkame Edilmiş Uçucu Küllü Geopolimer Hafif Harcın Fiziksel, Mekanik ve Isıl Geçirimlilik Özelliklerinin İncelenmesi

İlkentapar S., Eren H.
Akademik Platform Mühendislik ve Fen Bilimleri Dergisi, cilt.9, sa.1, ss.28, 2021 (TRDizin)

Influence of nano SiO2 and nano CaCO3 particles on strength, workability, and microstructural properties of fly ash-based geopolymer

Durak U., Karahan O., Uzal B., İlkentapar S., Atiş C. D.
STRUCTURAL CONCRETE, cilt.22, sa.S1, 2021 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

The Effect of Microwave Curing on the Strength Development of Class-F Fly Ash-Based Geopolymer Mortar

Khalee F., ATİŞ C. D., DURAK U., İLKENTAPAR S., KARAHAN O.
Erciyes Üniversitesi Fen Bilimleri Enstitüsü Dergisi, cilt.37, sa.1, ss.118-129, 2021 (TRDizin) Sürdürülebilir Kalkınma identifier identifier

The influence of activator type and quantity on the transport properties of class F fly ash geopolymer

Atabey I. I., KARAHAN O., Bilim C., ATİŞ C. D.
CONSTRUCTION AND BUILDING MATERIALS, cilt.264, 2020 (SCI-Expanded, Scopus) identifier identifier

Uçucu Kül Esaslı Geopolimer Harçlara Diatomit İkamesinin Isı İletkenliğe Etkisi

İLKENTAPAR S., ÖRKLEMEZ E.
Erciyes Üniversitesi Fen Bilimleri Enstitüsü Fen Bilimleri Dergisi, 2020 (TRDizin)

Durability Properties of Geopolymer Mortars Containing Slag

Bingol S., Bilim C., Atiş C. D., Durak U.
IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING, cilt.44, ss.561-569, 2020 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

Very high strength Na2SiO3 and NaOH activated fly ash based geopolymer mortar

Atabey I. I., KARAHAN O., Bilim C., ATİŞ C. D.
CEMENT WAPNO BETON, cilt.25, sa.4, ss.292-305, 2020 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

Investigation of mechanical and thermal properties of nano SiO2/hydrophobic silica aerogel co-doped concrete with thermal insulation properties

Al Zaidi I. K., Demirel B., Atiş C. D., Akkurt F.
STRUCTURAL CONCRETE, cilt.21, sa.3, ss.1123-1133, 2020 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

An investigation of resistance of sodium meta silicate activated slag mortar to acidic and basic mediums

Bingol S., Bilim C., Atiş C. D., Durak U., İlkentapar S., Karahan O.
REVISTA DE LA CONSTRUCCION, cilt.19, sa.1, ss.127-133, 2020 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

2 years of monitoring results from passive solar energy storage in test cabins with phase change materials

Cellat K., Beyhan B., Konuklu Y., DÜNDAR C., KARAHAN O., Güngör C., et al.
Solar Energy, cilt.200, ss.29-36, 2020 (SCI-Expanded, Scopus) identifier identifier

Strength Development of Heat Cured and Ambient Cured Sodium Hydroxide Activated Fly Ash Based Geopolymer

ATİŞ C. D., ALİ O. A. A., DURAK U., İLKENTAPAR S., KARAHAN O.
Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi, cilt.9, sa.2, ss.79-88, 2020 (TRDizin) Sürdürülebilir Kalkınma identifier

Mechanical properties of class C and F fly ash geopolymer mortars

Kaya M., Uysal M., Yilmaz K., KARAHAN O., ATİŞ C. D.
GRADEVINAR, cilt.72, sa.4, ss.297-309, 2020 (SCI-Expanded, Scopus) identifier identifier

Experimental investigation on properties of recycled aggregate concrete with optimized Ball Milling Method

DİLBAS H., ÇAKIR Ö., ATİŞ C. D.
CONSTRUCTION AND BUILDING MATERIALS, cilt.212, ss.716-726, 2019 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

Estimation of Compressive Strength of Concrete Using Physico-Mechanical Properties of Aggregate Rock

Kilic A., Teymen A., Ozdemir O., ATİŞ C. D.
IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING, cilt.43, ss.171-178, 2019 (SCI-Expanded, Scopus) identifier identifier

Resistance of polypropylene fibered mortar to elevated temperature under different cooling regimes

Karahan O., Durak U., İlkentapar S., Atabey I. I., Atiş C. D.
REVISTA DE LA CONSTRUCCION, cilt.18, sa.2, ss.386-397, 2019 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier

Influence of waste marble powder as a replacement of cement on the properties of mortar

Yamanel K., Durak U., İlkentapar S., Atabey I. I., Karahan O., Atiş C. D.
REVISTA DE LA CONSTRUCCION, cilt.18, sa.2, ss.290-300, 2019 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier

Effect of different storage methods on thermal and mechanical properties of mortar containing aerogel, fly ash and nano-silica

Al Zaidi A. K. A., DEMİREL B., ATİŞ C. D.
CONSTRUCTION AND BUILDING MATERIALS, cilt.199, ss.501-507, 2019 (SCI-Expanded, Scopus) identifier identifier

Effect of different storage methods on thermal and mechanical properties of mortar containing aerogel, fly ash and nano-silica

Al ZAIDI I., DEMİREL B., ATİŞ C. D.
CONSTRUCTION AND BUILDING MATERIALS, cilt.199, ss.501-507, 2018 (SCI-Expanded, Scopus)

Optimization of heat cured fly ash/slag blend geopolymer mortars designed by "Combined Design" method: Part 1

LUGA E., ATİŞ C. D.
CONSTRUCTION AND BUILDING MATERIALS, cilt.178, ss.393-404, 2018 (SCI-Expanded, Scopus) identifier identifier

The effect of coarse to fine aggregate ratio on the fresh and hardened properties of roller-compacted concrete pavement

HASHEMI M., SHAFIGH P., BIN KARIM M. R., ATİŞ C. D.
CONSTRUCTION AND BUILDING MATERIALS, cilt.169, ss.553-566, 2018 (SCI-Expanded, Scopus) identifier identifier

THE UTILAZATION OF A NON-STANDARD HIGH-CALCIUM WASTE FLY ASH IN MORTAR

KARAHAN O.
FRESENIUS ENVIRONMENTAL BULLETIN, cilt.27, sa.3, ss.1363-1371, 2018 (SCI-Expanded) identifier

Behaviour of Geopolymer Mortars after Exposure to Elevated Temperatures

Kaya M., Uysal M., Yilmaz K., ATİŞ C. D.
MATERIALS SCIENCE-MEDZIAGOTYRA, cilt.24, sa.4, ss.428-436, 2018 (SCI-Expanded, Scopus) identifier identifier

Transport properties of high volume fly ash or slag concrete exposed to high temperature

KARAHAN O.
CONSTRUCTION AND BUILDING MATERIALS, cilt.152, ss.898-906, 2017 (SCI-Expanded, Scopus) identifier

Influence of duration of heat curing and extra rest period after heat curing on the strength and transport characteristic of alkali activated class F fly ash geopolymer mortar

İlkentapar S., Atiş C. D., Karahan O., Avsaroglu E. B. G.
CONSTRUCTION AND BUILDING MATERIALS, cilt.151, ss.363-369, 2017 (SCI-Expanded, Scopus) identifier identifier

Carbonation resistance of slag mortars activated by different alkali activators

BİLİM C., ATİŞ C. D.
Turkish Journal of Engineering, cilt.1, ss.1-4, 2017 (TRDizin)

Investigation of mechanical properties of mortars with carbon fiber using multi slice computed tomography

Sola O. C., Erdem S., Bostanci L., ATİŞ C. D., Sayin B.
REVISTA DE LA CONSTRUCCION, cilt.16, sa.1, 2017 (SCI-Expanded, Scopus) identifier identifier

Ground Granulated Pumice-Based Cement Mortars Exposed to Abrasion and Fire

KARAHAN O., Hossain K. M. A., ATİŞ C. D., Lachemi M., Ozbay E.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, cilt.42, sa.3, ss.1321-1326, 2017 (SCI-Expanded) identifier

Identifying the bond and abrasion behavior of alkali activated concretes by central composite design method

Balcikanli M., Turker H. T., Ozbay E., KARAHAN O., ATİŞ C. D.
CONSTRUCTION AND BUILDING MATERIALS, cilt.132, ss.196-209, 2017 (SCI-Expanded, Scopus) identifier

Strength properties of slag/fly ash blends activated with sodium metasilicate

LUGA E., ATİŞ C. D., KARAHAN O., İLKENTAPAR S., Gorur E. B.
GRADEVINAR, cilt.69, sa.3, ss.199-205, 2017 (SCI-Expanded) identifier

Robust microencapsulated phase change materials in concrete mixes for sustainable buildings

Beyhan B., Cellat K., KONUKLU Y., GUNGOR C., KARAHAN O., DÜNDAR C., et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH, cilt.41, sa.1, ss.113-126, 2017 (SCI-Expanded, Scopus) identifier

Effects of milled cut steel fibers on the properties of concrete

Karahan O., Ozbay E., ATİŞ C. D., Lachemi M., Hossain K. M. A.
KSCE JOURNAL OF CIVIL ENGINEERING, cilt.20, sa.7, ss.2783-2789, 2016 (SCI-Expanded, Scopus) identifier

The influence of elevated temperature on strength and microstructure of high strength concrete containing ground pumice and metakaolin

SARIDEMIR M., SEVERCAN M. H., CIFLIKLI M., CELIKTEN S., OZCAN F., ATİŞ C. D.
CONSTRUCTION AND BUILDING MATERIALS, cilt.124, ss.244-257, 2016 (SCI-Expanded, Scopus) identifier identifier

Sodyum Sülfat ile Aktifleştirilen Uçucu Kül Katkılı Harçların Özellikleri

ATİŞ C. D., KARAHAN O., BİLİM C., ÖZCAN F., SEVİM U. K.
Niğde Üniversitesi Mühendislik Bilimleri Dergisi, cilt.5, sa.2, 2016 (TRDizin)

Comparison of Unit Price Method and Unit Area Cost Method for Construction Cost Estimation

BAYRAM S., Ocal M. E., Laptali Oral E., ATİŞ C. D.
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, cilt.19, sa.2, ss.175-183, 2016 (ESCI, TRDizin) identifier

Yapım Maliyeti Tahmininde Birim Fiyat Yöntemi – Yapı Yaklaşık Maliyetleri Kıyaslaması

BAYRAM S., Öcal M. E., Laptalı Oral E., ATİŞ C. D.
POLİTEKNİK DERGİSİ, cilt.19, sa.2, ss.175-183, 2016 (TRDizin)

Strength Properties of Slag/Fly Ash Blends Activated with Sodium Metasilicate and Sodium Hydroxide plus Silica Fume

LUGA E., ATİŞ C. D.
PERIODICA POLYTECHNICA-CIVIL ENGINEERING, cilt.60, sa.2, ss.223-228, 2016 (SCI-Expanded, Scopus) identifier identifier

COMPARISON OF MULTI LAYER PERCEPTRON (MLP) AND RADIAL BASIS FUNCTION (RBF) FOR CONSTRUCTION COST ESTIMATION: THE CASE OF TURKEY

BAYRAM S., ÖCAL M. E., Laptali Oral E., ATİŞ C. D.
JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT, cilt.22, sa.4, ss.480-490, 2016 (SCI-Expanded, Scopus) identifier identifier

Thermal enhancement of concrete by adding bio-based fatty acids as phase change materials

Cellat K., Beyhan B., GUNGOR C., KONUKLU Y., KARAHAN O., DÜNDAR C., et al.
ENERGY AND BUILDINGS, cilt.106, ss.156-163, 2015 (SCI-Expanded, Scopus) identifier

Very high strength (120 MPa) class F fly ash geopolymer mortar activated at different NaOH amount, heat curing temperature and heat curing duration

Atis C. D., Gorur E. B., Karahan O., Bilim C., Ilkentapar S., LUGA E.
CONSTRUCTION AND BUILDING MATERIALS, cilt.96, ss.673-678, 2015 (SCI-Expanded, Scopus) identifier identifier

Effect of kaolin waste content on the properties of normal-weight concretes

LOTFY A., KARAHAN O., Ozbay E., Hossain K. M. A., Lachemi M.
CONSTRUCTION AND BUILDING MATERIALS, cilt.83, ss.102-107, 2015 (SCI-Expanded, Scopus) identifier

Effects of chemical admixtures and curing conditions on some properties of alkali-activated cementless slag mixtures

Bilim C., KARAHAN O., ATİŞ C. D., İLKENTAPAR S.
KSCE JOURNAL OF CIVIL ENGINEERING, cilt.19, sa.3, ss.733-741, 2015 (SCI-Expanded, Scopus) identifier

Değişken kesitli hiperstatik çerçevenin castigliano teoremi ve mathematica ile çözümü

KILINÇ M., ATİŞ C. D.
ErciyesÜniversitesi Fen Bilimleri Enstitüsü, cilt.30, sa.5, ss.318-322, 2014 (Hakemli Dergi)

Thermal conductivity, compressive strength and ultrasonic wave velocity of cementitious composite containing waste PET lightweight aggregate (WPLA)

Akçaözoğlu S., Akçaözoğlu K., ATİŞ C. D.
COMPOSITES PART B-ENGINEERING, cilt.45, sa.1, ss.721-726, 2013 (SCI-Expanded, Scopus) identifier identifier

Influence of admixtures on the properties of alkali-activated slag mortars subjected to different curing conditions

Bilim C., KARAHAN O., ATİŞ C. D., İlkentapar S.
MATERIALS & DESIGN, cilt.44, ss.540-547, 2013 (SCI-Expanded, Scopus) identifier

Dual effectiveness of freezing-thawing and sulfate attack on high-volume slag-incorporated ECC

Ozbay E., KARAHAN O., Lachemi M., Hossain K. M. A., ATİŞ C. D.
COMPOSITES PART B-ENGINEERING, cilt.45, sa.1, ss.1384-1390, 2013 (SCI-Expanded, Scopus) identifier

The effects of pyrite ash on the compressive strength properties of briquettes

Sola O. C., Atis C. D.
KSCE JOURNAL OF CIVIL ENGINEERING, cilt.16, sa.7, ss.1225-1229, 2012 (SCI-Expanded, Scopus) identifier identifier

Investigation of Properties of Engineered Cementitious Composites Incorporating High Volumes of Fly Ash and Metakaolin

Ozbay E., KARAHAN O., Lachemi M., Hossain K. M. A., ATİŞ C. D.
ACI MATERIALS JOURNAL, cilt.109, sa.5, ss.565-571, 2012 (SCI-Expanded, Scopus) identifier identifier

Fresh, Mechanical, Transport, and Durability Properties of Self-Consolidating Rubberized Concrete

KARAHAN O., Ozbay E., Hossain K. M. A., Lachemi M., ATİŞ C. D.
ACI MATERIALS JOURNAL, cilt.109, sa.4, ss.413-420, 2012 (SCI-Expanded, Scopus) identifier identifier

Effect of metakaolin content on the properties self-consolidating lightweight concrete

Karahan O., Hossain K. M. A., Ozbay E., Lachemi M., Sancak E.
CONSTRUCTION AND BUILDING MATERIALS, cilt.31, ss.320-325, 2012 (SCI-Expanded, Scopus) identifier

Alkali activation of mortars containing different replacement levels of ground granulated blast furnace slag

Bilim C., Atis C. D.
CONSTRUCTION AND BUILDING MATERIALS, cilt.28, sa.1, ss.708-712, 2012 (SCI-Expanded, Scopus) identifier identifier

Residual compressive strength of fire-damaged mortar after post-fire-air-curing

Karahan O.
FIRE AND MATERIALS, cilt.35, sa.8, ss.561-567, 2011 (SCI-Expanded, Scopus) identifier

Resistance of alkali-activated slag mortar to abrasion and fire

KARAHAN O., Yakupoğlu A.
ADVANCES IN CEMENT RESEARCH, cilt.23, sa.6, ss.289-297, 2011 (SCI-Expanded, Scopus) identifier

Effect of Granulated Blast Furnace Slag and fly ash addition on the strength properties of lightweight mortars containing waste PET aggregates

Akçaözoğlu S., ATİŞ C. D.
CONSTRUCTION AND BUILDING MATERIALS, cilt.25, sa.10, ss.4052-4058, 2011 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

The durability properties of polypropylene fiber reinforced fly ash concrete

KARAHAN O., ATİŞ C. D.
MATERIALS & DESIGN, cilt.32, sa.2, ss.1044-1049, 2011 (SCI-Expanded, Scopus) identifier

The Abrasion and Strength Properties of Mortars Containing Ground Granulated Blast Furnace Slag

Bilim C., ATİŞ C. D.
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, cilt.14, sa.2, ss.101-107, 2011 (ESCI) identifier

The Effects of Different Types of Fly Ash on the Compressive Strength Properties of Briquettes

Sola O. C., YAYLA M., Sayin B., Atis C. D.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2011 (SCI-Expanded, Scopus) identifier identifier

An investigation on the use of shredded waste PET bottles as aggregate in lightweight concrete

Akçaözoğlu S., ATİŞ C. D., Akçaözoğlu K.
WASTE MANAGEMENT, cilt.30, sa.2, ss.285-290, 2010 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier identifier

The effects of scoria and pumice aggregates on the strengths and unit weights of lightweight concrete

KILIÇ A. M., ATİŞ C. D., Teymen A., KARAHAN O., Arı K.
SCIENTIFIC RESEARCH AND ESSAYS, cilt.4, sa.10, ss.961-965, 2009 (SCI-Expanded) identifier identifier

Statistical analysis for strength properties of polypropylene-fibre-reinforced fly ash concrete

KARAHAN O., Tanyildizi H., ATİŞ C. D.
MAGAZINE OF CONCRETE RESEARCH, cilt.61, sa.7, ss.557-566, 2009 (SCI-Expanded, Scopus) identifier

Relation between Strength Properties (Flexural and Compressive) and Abrasion Resistance of Fiber (Steel and Polypropylene)-Reinforced Fly Ash Concrete

ATİŞ C. D., KARAHAN O., Arı K., Sola O. C., Bilim C.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING, cilt.21, sa.8, ss.402-408, 2009 (SCI-Expanded, Scopus) identifier

Predicting the compressive strength of ground granulated blast furnace slag concrete using artificial neural network

Bilim C., ATİŞ C. D., Tanyildizi H., KARAHAN O.
ADVANCES IN ENGINEERING SOFTWARE, cilt.40, sa.5, ss.334-340, 2009 (SCI-Expanded, Scopus) identifier

Statistical analysis for strength properties of polpropylene fiber reinforced fly ash concrete

KARAHAN O., TANYILDIZI H., ATİŞ C. D.
Magazine of Concrete Research, ss.467-476, 2009 (SCI-Expanded, Scopus)

Influence of activator on the strength and drying shrinkage of alkali-activated slag mortar

ATİŞ C. D., Bilim C., Celik O., KARAHAN O.
CONSTRUCTION AND BUILDING MATERIALS, cilt.23, sa.1, ss.548-555, 2009 (SCI-Expanded, Scopus) identifier

Properties of steel fiber reinforced fly ash concrete

ATİŞ C. D., KARAHAN O.
CONSTRUCTION AND BUILDING MATERIALS, cilt.23, sa.1, ss.392-399, 2009 (SCI-Expanded, Scopus) identifier

Comparison of artificial neural network and fuzzy logic models for prediction of long-term compressive strength of silica fume concrete

Oezcan F., ATİŞ C. D., KARAHAN O., Uncuoglu E., Tanyildizi H.
Advances in Engineering Software, cilt.40, sa.9, ss.856-863, 2009 (SCI-Expanded, Scopus) identifier identifier

An artificial neural network approach for prediction of long-term strength properties of steel fiber reinforced concrete containing fly ash

KARAHAN O., Tanyildizi H., ATİŞ C. D.
JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A, cilt.9, sa.11, ss.1514-1523, 2008 (SCI-Expanded, Scopus) identifier

Compactibility of hot bituminous mixtures made with crumb rubber-modified binders

Celik O. N., Atis C. D.
CONSTRUCTION AND BUILDING MATERIALS, cilt.22, sa.6, ss.1143-1147, 2008 (SCI-Expanded, Scopus) identifier identifier

The influence of aggregate type on the strength and abrasion resistance of high strength concrete

KILIÇ A. M., Atis C. D., Teymen A., KARAHAN O., Özcan F., Bilim C., et al.
CEMENT & CONCRETE COMPOSITES, cilt.30, sa.4, ss.290-296, 2008 (SCI-Expanded, Scopus) identifier

A comparative experimental investigation of concrete, reinforced-concrete and steel-fibre concrete pipes under three-edge-bearing test

Haktanir T., Ari K., Altun F., Karahan O.
CONSTRUCTION AND BUILDING MATERIALS, cilt.21, sa.8, ss.1702-1708, 2007 (SCI-Expanded, Scopus) identifier identifier

Wet and dry cured compressive strength of concrete containing ground granulated blast-furnace slag

Atis C. D., BİLİM C.
BUILDING AND ENVIRONMENT, cilt.42, sa.8, ss.3060-3065, 2007 (SCI-Expanded, Scopus) identifier identifier

Strength prediction of silica fume concrete by accelerated warm-water curing method

Atis C. D.
INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, cilt.14, sa.3, ss.266-270, 2007 (SCI-Expanded, Scopus) identifier identifier

Erciyes yöresi bims agregaları ile taşıyıcı hafif beton

HAKTANIR T., Arı K., KARAHAN O., ALTUN F.
Yapı Dünyası Dergisi, sa.129, ss.44-50, 2006 (Hakemli Dergi)

Effects of steel fibers and mineral filler on the water-tightness of concrete pipes

Haktanir T., Ari K., Altun F., Atis C. D., Karahan O.
CEMENT & CONCRETE COMPOSITES, cilt.28, sa.9, ss.811-816, 2006 (SCI-Expanded, Scopus) identifier identifier

Influence of dry and wet curing conditions on compressive strength of silica fume concrete

ATIS C. D., OZCAN F., KILIC A., Karahan O., BILIM C., SEVERCAN M.
BUILDING AND ENVIRONMENT, cilt.40, sa.12, ss.1678-1683, 2005 (SCI-Expanded, Scopus) identifier

Strength properties of high-volume fly ash roller compacted and workable concrete, and influence of curing condition

Atis C. D.
CEMENT AND CONCRETE RESEARCH, cilt.35, sa.6, ss.1112-1121, 2005 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

Çelik Lif Katkılı C20 Betonunun Mekanik Özelliklerinin Deneysel Araştırılması

ALTUN F., Özcan D. M., Vekli M., KARAHAN O.
Afyon Kocatepe Üniversitesi Dergisi, cilt.4, ss.31-40, 2004 (Hakemli Dergi)

Strength properties of roller compacted concrete containing a non-standard high calcium fly ash

ATIS C. D., SEVIM U., OZCAN F., BILIM C., Karahan O., TANRIKULU A., et al.
MATERIALS LETTERS, cilt.58, sa.9, ss.1446-1450, 2004 (SCI-Expanded, Scopus) identifier

Carbonation-porosity-strength model for fly ash concrete

Atis C. D.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING, cilt.16, sa.1, ss.91-94, 2004 (SCI-Expanded, Scopus) identifier identifier

Strength and shrinkage properties of mortar containing a nonstandard high-calcium fly ash

Atis C. D., KİLİC A., SEVIM U.
CEMENT AND CONCRETE RESEARCH, cilt.34, sa.1, ss.99-102, 2004 (SCI-Expanded, Scopus) identifier identifier

Experimental and numerical studies of metal powders pressed by uniaxial floating die: Case copper and bronze

EKSI A., LAMAN M., Atis C. D., YILDIZ A., KURT A.
KOVOVE MATERIALY-METALLIC MATERIALS, cilt.42, sa.5, ss.339-352, 2004 (SCI-Expanded, Scopus) identifier identifier

High-strength lightweight concrete made with scoria aggregate containing mineral admixtures

Kilic A., Atis C. D., YASAR E., OZCAN F.
CEMENT AND CONCRETE RESEARCH, cilt.33, sa.10, ss.1595-1599, 2003 (SCI-Expanded, Scopus) identifier identifier

Discussion of "Correlations between mechanical properties of high-strength concrete" by M. A. Rashid, M. A. Mansur, and P. Paramasivam

Atis C. D., Tanrikulu A.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING, cilt.15, sa.5, ss.511-512, 2003 (SCI-Expanded, Scopus) identifier identifier

Abrasion-porosity-strength model for fly ash concrete

Atis C. D.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING, cilt.15, sa.4, ss.408-410, 2003 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

Accelerated carbonation and testing of concrete made with fly ash

Atis C. D.
CONSTRUCTION AND BUILDING MATERIALS, cilt.17, sa.3, ss.147-152, 2003 (SCI-Expanded, Scopus) identifier identifier

Strength properties of lightweight concrete made with basaltic pumice and fly ash

YASAR E., Atis C. D., KİLİC A., GULSEN H.
MATERIALS LETTERS, cilt.57, sa.15, ss.2267-2270, 2003 (SCI-Expanded, Scopus) identifier identifier

High-volume fly ash concrete with high strength and low drying shrinkage

Atis C. D.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING, cilt.15, sa.2, ss.153-156, 2003 (SCI-Expanded, Scopus) identifier identifier

Nondestructive testing of mortar specimens using the microwave free-space method

KHARKOVSKY S., Atis C. D.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING, cilt.15, sa.2, ss.200-204, 2003 (SCI-Expanded, Scopus) identifier identifier

Betonarme Yapılarda Deprem Hasarları ve 6 Katlı bir Yapının Güçlendirme Çalışmaları

ALTUN F., KARA H. B., UNCUOĞLU E., KARAHAN O.
Gazi Üniversitesi Fen Bilimleri Dergisi, cilt.16, ss.309-317, 2003 (Hakemli Dergi)

Effect of bar shape on the pull-out capacity of fully-grouted rockbolts

KİLİC A., YASAR E., Atis C. D.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY, cilt.18, sa.1, ss.1-6, 2003 (SCI-Expanded, Scopus) identifier identifier

A discussion of the paper "Very-high-performance concrete with ultrafine powders" by Guangcheng Long, Xinyou Wang and Youjun Xie

ATİŞ C. D.
CEMENT AND CONCRETE RESEARCH, cilt.33, sa.1, ss.165-166, 2003 (SCI-Expanded, Scopus) identifier

Measurement and monitoring of microwave reflection and transmission properties of cement-based specimens

KHARKOVSKY S., AKAY M., HASAR U., Atis C. D.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, cilt.51, sa.6, ss.1210-1218, 2002 (SCI-Expanded, Scopus) identifier identifier

The use of a non-standard high calcium fly ash in concrete and its response to accelerated curing

Atis C. D., BİLİM C., OZCAN F., AKCAOZOGLU K., SEVIM U.
MATERIALES DE CONSTRUCCION, cilt.52, sa.267, ss.5-17, 2002 (SCI-Expanded, Scopus) identifier identifier

Relation between abrasion resistance and flexural strength of high volume fly ash concrete

Atis C. D., CELIK O.
MATERIALS AND STRUCTURES, cilt.35, sa.248, ss.257-260, 2002 (SCI-Expanded, Scopus) identifier identifier

Heat evolution of high-volume fly ash concrete

Atis C. D.
CEMENT AND CONCRETE RESEARCH, cilt.32, sa.5, ss.751-756, 2002 (SCI-Expanded, Scopus) identifier identifier

High volume fly ash abrasion resistant concrete

Atis C. D.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING, cilt.14, sa.3, ss.274-277, 2002 (SCI-Expanded, Scopus) identifier identifier

Düşey Yükler Altında Hasar Görmüş Betonarme bir Yapıda Güçlendirme Projesi Örneği

ALTUN F., KARA H. B., HAKTANIR T., Özcan D. M., KARAHAN O., KAYA Z.
Erciyes Üniversitesi Fen Bilimleri Dergisi, cilt.18, ss.63-76, 2002 (Hakemli Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler

Measurement and monitoring of microwave reflection and transmission properties of cement-based specimens

Kharkovsky S., Akay M., Hasar U., Atis C. D.
18th IEEE Instrumentation and Measurement Technology Conference (IMTC/2001), Budapest, Macaristan, 21 - 23 Mayıs 2001, ss.513-518, (Tam Metin Bildiri) identifier identifier

Measurement and monitoring of microwave reflection and transmission properties of cement-based materials for propagation modeling

KHARKOVSKY S., HASAR U., AKAY M., Atis C. D.
53rd IEEE Vehicular Technology Conference (VTC), RHODES, Yunanistan, 6 - 09 Mayıs 2001, ss.1202-1206, (Tam Metin Bildiri) identifier identifier

Characterization of cement-based materials using microwave reflection and transmission measurements

KHARKOVSKY S., Atis C. D., HASAR U.
11th International Symposium on Nondestructive Characterization of Materials, Berlin, Almanya, 24 - 28 Haziran 2002, ss.373-380, (Tam Metin Bildiri) identifier

Comparison and study of the effect of different storage methods on the thermal insulation and mechanical properties of light blocks with hydrophobic silica aerogel and fly ash

El Zaidi I., DEMİREL B., ATİŞ C. D.
The International Conference on Material Science and Technology in Cappadocia(IMSTEC 2017, 11 - 13 Ekim 2017, ss.646, (Özet Bildiri)

Corrosion resistance of fly ash-based geopolymers

ATABEY İ. İ., KARAHAN O., BİLİM C., ATİŞ C. D.
3Nd International Conference on Material Science and Technology IMSTEC’xx18, Nevşehir, Türkiye, 17 - 19 Eylül 2018, ss.334-338, (Tam Metin Bildiri)

60 C de ISIL KÜRUYGULANAN F SINIFI UÇUCU KÜL TABANLI GEOPOLİMER HARÇLARA FARKLI ORANLARDA DİATOMİT İKAMESİNİN ETKİLERİ

Örklemez E., İlkentapar S.
4 th INTERNATIONAL SYMPOSIUM ON CURRENT DEVELOPMENTS IN SCIENCE, TECHNOLOGY AND SOCIAL SCIENCES, Gaziantep, Türkiye, 12 - 13 Nisan 2021, ss.219-220, (Özet Bildiri)

Yüksek Fırın Cüruflu Geopolimer Harçların Dayanım Özellikleri

Bingöl Ş., Bilim C., Atiş C. D., İlkentapar S., Durak U., Karahan O.
EUROPEAN CONFERENCE ON SCIENCE, ART CULTURE, Antalya, Türkiye, 19 - 22 Nisan 2018, ss.22, (Özet Bildiri) Sürdürülebilir Kalkınma

Nano Sio2 ve Nano CaCo3’xxin Geopolimer Harçların Dayanım Özelliklerine Etkisi

DURAK U., KARAHAN O., UZAL B., İLKENTAPAR S., ATİŞ C. D.
IMSEC 2017 2nd International Mediterranen Science and Engineering Congress, Adana, Türkiye, 25 - 27 Ekim 2017, ss.8, (Özet Bildiri)

Alkali Aktive Edilmiş Yüksek Fırın Cüruu Harçların Dayanım Özellikleri

ATİŞ C. D., BİLİM C., Bingöl Ş., KARAHAN O.
Uluslararası Yapılarda Kimyasal Katkılar 5. Sempozyumu ve Sergisi, Ankara, Türkiye, 19 - 20 Ekim 2017, ss.377-390, (Tam Metin Bildiri)

Strength Development of Fly Ash-Based Sodium Meta-Silicate and Heat Activated Geopolymer Mortar

Atiş C. D., Ali O. A., Durak U., İlkentapar S., Karahan O.
I. Uluslararası Bilimsel Çalışmalarda Yenilikçi Yaklaşımlar Sempozyumu, Antalya, Türkiye, 11 - 13 Nisan 2018, cilt.2, ss.11-12, (Özet Bildiri) Sürdürülebilir Kalkınma

Strength properties of Çatalağzı class F fly ash geopolymer mortar activated with different NaOH amount

KARAHAN O., ATABEY İ. İ.
International Conference on Engineering, Saraybosna, Bosna-Hersek, 24 - 27 Mayıs 2016, (Özet Bildiri)

Türkiye’de 4734 Sayılı Kamu İhale Kanunu’na Göre Gerçekleştirilen Kamu İnşaat Projelerinin Maliyet ve Süre Açısından Değerlendirilmesi

BAYRAM S., Öcal M. E., Laptalı Oral E., Atiş C. D.
3. Proje ve Yapım Yönetimi Kongresi, Antalya, Türkiye, 6 - 08 Kasım 2014, ss.25, (Tam Metin Bildiri)

Influence of Incubation Period on Strength Development of NaOH and Heat Cured Fly Ash Based Geopolymer Mortar

Durak U., Ilkentapar S., Atabey İ. İ., Karahan O., Atiş C. D.
2nd International Conference on Civil and Environmental Engineering (ICOCEE - Cappadocia), Nevşehir, Türkiye, 8 - 10 Mayıs 2017, ss.1021, (Özet Bildiri) Sürdürülebilir Kalkınma

INVESTIGATION OF STRENGTH DEVELOPMENT OF F CLASS FLY ASH BASED GEOPOLYMER MORTAR SAMPLES AFTER HEAT CURING

Durak U.
2. INTERNATIONAL BAKU SCIENTIFIC RESEARCHES CONFERENCE, Baku, Azerbaycan, 28 - 30 Nisan 2021, cilt.1, sa.1, ss.1-8, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

Effect of Extra Air Curing Time on Compressive Strength of Fly Ash Geopolymers Containing Metakaolin

Hataf Naji Alazzawi Z., Karahan O., Atabey İ. İ., Durak U., İlkentapar S., Atiş C. D.
Uluslararası 10. Beton Kongresi, Bursa, Türkiye, 2 - 04 Mayıs 2019, ss.36-41, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

Yüksek fırın curuflu geopolimer harçlara sıcak kür uygulaması

BİNGÖL Ş., BİLİM C., ATİŞ C. D., İLKENTAPAR S., DURAK U., KARAHAN O.
EUROPEAN CONFERENCE ON SCIENCE, ART CULTURE, Antalya, Türkiye, 19 - 22 Nisan 2018, ss.28, (Özet Bildiri)

Passive Thermal Storage in Buildings with a Novel Composite Panel with Microencapsulated Phase Change Material

Cellat K., Beyhan B., PAKSOY H. Ö., Güngör C., KONUKLU Y., KARAHAN O., et al.
The 13th International Conference on Energy Storage, 19 - 22 Mayıs 2015

Alkali Aktive Edilmiş Yüksek Fırın Cüruflu Harçların Dayanım Özellikleri

ATİŞ C. D., BİLİM C., BİNGÖL Ş., KARAHAN O.
Uluslararası Yapılarda Kimyasal Katkılar 5. Sempozyumu ve Sergisi, Ankara, Türkiye, 19 - 20 Ekim 2017, ss.377-390, (Tam Metin Bildiri)

Effect of Nanoparticle Addition on the Pore Size Distribution and Compressive Strength of High-Volume Natural Pozzolan Cementitious Systems

ILKENTAPAR S., UZAL B., KARAHAN O., Korkanç M., ATİŞ C. D.
International Conference on Civil and Environmental Engineering, Nevşehir, Türkiye, 8 - 10 Mayıs 2017, ss.1269, (Özet Bildiri)

INVESTIGATION OF THE EFFECT OF THE PRE-REST PERIOD AND MICROWAVE CURING ON THE MECHANICAL PROPERTIES OF GEOPOLYMER MORTAR SPECIMENS

Durak U.
IV. INTERNATIONAL ANKARA CONFERENCE ON SCIENTIFIC RESEARCH, Ankara, Türkiye, 10 - 11 Nisan 2021, cilt.1, sa.1, ss.186-194, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

Investigation of the Effect of Different Industrial Wastes on Geopolymeric Mortar

Bayer Öztürk Z., Yıldız G., Cavlak U., Atabey İ. İ., İlkentapar S.
The International Conference on Materials Science, Nevşehir, Türkiye, 21 - 23 Haziran 2019, ss.1161-1165, (Tam Metin Bildiri)

INVESTIGATION OF THE EFFECT OF DIATOMITE SUBSTITUTION ON MECHANICAL PROPERTIES AND ELEVATED TEMPERATURE RESISTANCE OF GEOPOLYMER MORTARS

Örklemez E., İlkentapar S.
CUKUROVA 9th INTERNATIONAL SCIENTIFIC RESEARCHES CONFERENCE, Adana, Türkiye, 9 - 11 Ekim 2022, ss.451-455, (Tam Metin Bildiri)

New microencapsulated phase change material for thermal energy storage in building applications

Beyhan B., Cellat K., PAKSOY H. Ö., KONUKLU Y., KARAHAN O., DÜNDAR C., et al.
The 13th International Conference on Energy Storage, 19 - 22 Mayıs 2015

Yüksek Fırın Cüruflu Geopolimer Harçlara Sıcak Kür Uygulanması

BİNGÖL Ş., BİLİM C., ATİŞ C. D., DURAK U., İLKENTAPAR S., KARAHAN O.
EUROPEAN CONFERENCE ON SCIENCE, ART CULTURE, 19 - 22 Nisan 2018, (Özet Bildiri)

Islak ve Kuru Kürün Granüle Yüksek Fırın Cürufu içeren Harçların Basınç ve Eğilme Mukavemeti Üzerindeki etkisi

BİLİM C., ATİŞ C. D., KARAHAN O.
7. Uluslararası İnşaat Mühendisliğinde Gelişmeler Kongresi, İstanbul, Türkiye, 13 - 15 Ekim 2006, ss.25-32, (Tam Metin Bildiri)

Designing Microcapsules to Save Energy in Buildings

PAKSOY H. Ö., Cellat K., Beyhan B., KONUKLU Y., KARAHAN O., DÜNDAR C.
Engineering Conferences International ECI Digital Archives Design and Manufacture of Fuctional Microcapsules and Engineered Products, 3 - 07 Nisan 2016, (Özet Bildiri)

Properties of Alkali-Activated Slag Mortars

ATİŞ C. D., BİLİM C., CELİK Ö., KARAHAN O.
TÇMB 3rd International Symposium, Sustainability in Cement and Concrete, İstanbul, Türkiye, 1 - 04 Mart 2007, ss.201-211, (Tam Metin Bildiri)

FARKLI MS (SiO2/Na2O ORANLARINA SAHİP Na2SiO3 İLEÜRETİLEN GEOPOLİMER HARÇLARDA DAYANIM ÖZELLİKLERİNİNARAŞTIRILMASI

Atabey İ. İ., KARAHAN O., BİLİM C., ATİŞ C. D.
Uluslararası Mühendislik Araştırmaları Sempozyumu (UMAS’2017), Düzce, Türkiye, 11 - 13 Eylül 2017, ss.128, (Özet Bildiri)

EPS Hafif Şap Betonunun fiziksel ve Mekanik Özellikleri

Karahan O., Tekin Y., Atiş C. D., İlkentapar S., Uğur M.
2. ULUSLARARASI SÜRDÜRÜLEBİLİR YAPILAR SEMPOZYUMU, Ankara, Türkiye, 28 - 30 Mayıs 2015, ss.229-232, (Tam Metin Bildiri)

Nano SiO2 ve nano CaCO3’ın geopolimer harçların dayanım özelliklerine etkisi

Durak U., Karahan O., Uzal B., İlkentapar S., Atiş C. D.
2nd INTERNATIONAL MEDITERRANEAN SCIENCE AND ENGINEERING CONGRESS (IMSEC 2017), Adana, Türkiye, 25 - 27 Ekim 2017, cilt.0, sa.0, ss.1679, (Özet Bildiri) Sürdürülebilir Kalkınma

NaOH ile Aktieştirilen Sugözü Uçucu Küllü Geopolimerlerin Mekanik Özellikleri

Atabey İ. İ., KARAHAN O., BİLİM C., ATİŞ C. D.
Uluslararası Yapılarda Kimyasal Katkılar 5. Sempozyumu ve Sergisi, Ankara, Türkiye, 19 - 20 Ekim 2017, ss.335-348, (Tam Metin Bildiri)

Farklı Tür Bor Minerallerinin Geopolimer Sistemlerde Aktivatör Olarak Kullanılabilirliğinin Araştırılması

Örklemez E., İlkentapar S., Durak U., Uzal B., Karahan O., Atiş C. D.
BORON2022 Uluslararası Bor Sempozyumu, İstanbul, Türkiye, 5 - 07 Eylül 2022, ss.138-140, (Tam Metin Bildiri)

The Investigation of Mechanical Effects of Nano Al2O3 Particles For Fly Ash Based Geopolymer Mortar

Durak U., Karahan O., Uzal B., İlkentapar S., Atiş C. D.
Ist International Symposium on Innovative Approaches in Scientific Studies, Antalya, Türkiye, 11 - 13 Nisan 2018, cilt.2, ss.10, (Özet Bildiri) Sürdürülebilir Kalkınma

Investigation of Mechanical Effect of Addition High-Amount Nano-SiO2 and Nano-CaCO3 to the Cement Systems Containing High Volume Natural Zeolite and Pumice

İlkentapar S., Uzal B., Karahan O., Korkanç M., Atiş C. D., Durak U.
3. International Conference on Civil and Environmental Engineering, İzmir, Türkiye, 24 - 27 Nisan 2018, cilt.1, ss.138, (Özet Bildiri) Sürdürülebilir Kalkınma

, Effect of Polyproplene and Steel Fibers to the Abrasion Resistance of Concrete

ATİŞ C. D., KARAHAN O., ARİ K., CELİK O.
TÇMB 3rd International Symposium Sustainability in Cement and Concrete, İstanbul, Türkiye, 1 - 04 Mart 2007, ss.779-788, (Tam Metin Bildiri)

Alkali ile Aktifleştirilen Uçucu Kül Geopolimer Harcın Mekanik Özellikleri Üzerine Isıl Kür Süresinin Etkisi

ATİŞ C. D., İLKENTAPAR S., Görür E. B., KARAHAN O.
9. Ulusal Beton Kongresi, Antalya, Türkiye, 16 - 18 Nisan 2015, cilt.1, ss.1-9, (Tam Metin Bildiri)

EPS Hafif Şab Betonunun Fiziksel ve Mekanik Özellikleri

KARAHAN O., TEKİN Y.
2. Internatioanal Sustanable Bulding Symposium, 28 - 30 Mayıs 2015, (Tam Metin Bildiri)

PYHSICAL AND MECHANICAL PROPERTIES OF LIGTHWEIGHT CONCRETE SCREED CONTAINING EPS

KARAHAN O., TEKİN Y., ATİŞ C. D., İLKENTAPAR S., Uğur M.
2nd INTERNATIONAL SUSTAINABLE BUILDINGS SYMPOSIUM, 28 - 30 Mayıs 2015, (Özet Bildiri)

Effect of High Dosage Nanoparticles Addition on the Compressive and Flexural Strength on Cement Systems Containing a High Volume of Volcanic Tuff

İlkentapar S., Uzal B., Karahan O., Korkanç M., Atiş C. D., Durak U.
3. International Conference on Civil and Environmental Engineering, İzmir, Türkiye, 24 - 27 Nisan 2018, cilt.1, ss.137, (Özet Bildiri) Sürdürülebilir Kalkınma

EPS HAFİF ŞAP BETONUNUNFİZİKSEL VE MEKANİK ÖZELLİKLERİ

KARAHAN O., TEKİN Y., İLKENTAPAR S., ATİŞ C. D., UĞUR M.
2nd INTERNATIONAL SUSTAINABLE BUILDINGS SYMPOSIUM, 28 - 30 Mayıs 2015, (Tam Metin Bildiri)

NaOH ile Aktifleştirilen Sugözü Uçucu Külü Geopolimerlerin Mekanik Özellikleri

ATABEY İ. İ., KARAHAN O., BİLİM C., ATİŞ C. D.
Uluslararası Yapılarda Kimyasal Katkılar 5. Sempozyumu ve Sergisi, 19 Ekim - 20 Eylül 2017, ss.335-346, (Tam Metin Bildiri)

Farklı MS (Sio2/Na2O) Oranlarına Sahip Na2SiO3 ile Üretilen Geopolimer Harçlarda Dayanım Özelliklerinin Araştırılması

ATABEY İ. İ., KARAHAN O., BİLİM C., ATİŞ C. D.
Uluslararası Mühendislik Araştırmaları Sempozyumu UMAS 2017, Düzce, Türkiye, 11 - 13 Eylül 2017, ss.129, (Özet Bildiri)

NaOH ile Aktifleştirilen Sugözü Uçucu Küllü Geopolimerlerin Mekanik Özellikleri

ATABEY İ. İ., KARAHAN O., BİLİM C., ATİŞ C. D.
Uluslararası Yapılarda Kimyasal Katkılar 5.Sempozyumu ve Sergisi, Ankara, Türkiye, 19 - 20 Ekim 2017, ss.335-346, (Tam Metin Bildiri)

Numerical Study of Influence of Infill Walls on the Vertical Irregularity Limit of Turkish Seismic Code

Durak U., Aydın K.
World Congress on Civil, Structural, and Environmental Engineering, Praha, Çek Cumhuriyeti, 30 - 31 Mart 2016, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

The investigation of mechanical effects of nano sio2 particles for different sodium ion concentartions on fly ash based geopolmer mortar

DURAK U., KARAHAN O., UZAL B., İLKENTAPAR S., ATİŞ C. D.
13th Internatioanl Congress on Advances in Civil Engineering, 12 - 14 Eylül 2018, (Tam Metin Bildiri)

Indirect determination of split strength and abrasion resistance of concrete paving blocks as a function of dry bulk specific gravity and ultrasonic pulse velocity

HAKTANIR T., Arı K., KARAHAN O.
9th International Symposium on Concrete Roads, Türkiye, 1 - 04 Nisan 2004, (Tam Metin Bildiri)

The Investigation of Mechanical Effects of Nano SiO2 Particles for Different Sodium Ion Concentrations on Fly Ash BasedGeopolymer Mortar

Durak U., Karahan O., Uzal B., İlkentapar S., Atiş C. D.
13TH INTERNATIONAL CONGRESS ON ADVANCES IN CIVIL ENGINEERING (ACE 2018), İzmir, Türkiye, 12 - 14 Eylül 2018, cilt.0, sa.0, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

Improve Super Thermal Insulation of Light Concrete Blocks Using Aerogel and Enhanced By Nano Silica

El Zaidi I., DEMİREL B., ATİŞ C. D.
The International Conference on Material Science and Technology in Cappadocia(IMSTEC 2017), 11 - 13 Ekim 2017, ss.650, (Özet Bildiri)

The Effect of Using Different Types of Boron Minerals in Sustainable Hybrid Geopolymer Mortars on Mechanical Properties

Örklemez E., İlkentapar S., Durak U., Uzal B., Karahan O., Atiş C. D.
3.International Congress on Construction Materials Engineering and Arhitecture, Gaziantep, Türkiye, 25 Haziran 2023, ss.66-67, (Özet Bildiri)

Beton Borulara Çelik Lif Katkısının Mekanik Özelliklere Etkisi

ARI K., HAKTANIR T., ALTUN F., KARAHAN O.
Türkiye Hazır Beton Birliği Beton 2004 Kongresi, İstanbul, Türkiye, 1 - 04 Nisan 2004, ss.255-265, (Tam Metin Bildiri)

ATIK BETON AGREGALARININ HAFİF HARÇ ÜRETİMİNDE KULLANILABİLİRLİĞİNİN ARAŞTIRILMASI

Elmaağaç M. Y., Durak U.
INTERNATIONAL CONFERENCE ON GLOBAL PRACTICE OF MULTIDISCIPLINARY SCIENTIFIC STUDIES-VII, Girne, Kıbrıs (Kktc), 4 - 06 Temmuz 2024, ss.871-880, (Tam Metin Bildiri)

Farklı Oranlarda Diatomit İkamesinin 75 °C’de Isıl Kür Uygulanan F Sınıfı Uçucu Kül Tabanlı Geopolimer Harçlara Etkilerinin İncelenmesi

Örklemez E., İlkentapar S., Durak U., Karahan O., Atiş C. D.
III. INTERNATIONAL TURKIC WORLD CONGRESS ON SCIENCE AND ENGINEERING (TURK-COSE 2021), Niğde, Türkiye, 14 - 15 Haziran 2021, ss.1, (Özet Bildiri) Sürdürülebilir Kalkınma

ATIK BETON AGREGALARININ HAFİF HARÇ ÜRETİMİNDE KULLANILABİLİRLİĞİNİN ARAŞTIRILMASI

Elmaağaç M. Y., Durak U.
INTERNATIONAL CONFERENCE ON GLOBAL PRACTICE OF MULTIDISCIPLINARY SCIENTIFIC STUDIES-VII July 04-06, 2024 / Kyrenia, Cyprus, Girne, Kıbrıs (Kktc), 4 - 06 Temmuz 2024, cilt.1, sa.1, ss.871-880, (Tam Metin Bildiri)

EFFECT OF HEMP FIBER ADDITION ON MECHANICAL PROPERTIES OF FLY ASH-BASED GEOPOLYMER MORTAR WITH PERLITE AGGREGATE

Hayi Paka B. A., Patrick B. O. G., İlkentapar S.
11TH AZERBAIJAN CONGRESS ON LIFE, ENGINEERING,MATHEMATICAL, AND APPLIED SCIENCES CONGRESS , Baku, Azerbaycan, 21 - 22 Haziran 2025, ss.547, (Özet Bildiri) Sürdürülebilir Kalkınma

Investıgation of the Mechanical Properties and High Temperature Resistance of Fly Ash Based Geopolymer Mortars Containing Silica Fume

Ergeshov Z., Örklemez E., İlkentapar S., Durak U., Karahan O., Atiş C. D.
Cukurova 11th International Scientific Researches Conference , Adana, Türkiye, 22 Ağustos - 24 Ekim 2023, ss.58-61, (Özet Bildiri)

Investigation of Mechanical Properties and Life Cycle Assessment of Alkali Activated Interlocking Parquet and Curbs Produced in Industrial Plants

Camkes E., Örklemez E., İlkentapar S., Durak U., Karahan O., Atiş C. D.
4 th International Congress of Engineering and Natural Sciences, Ankara, Türkiye, 24 - 25 Mayıs 2024, ss.1, (Özet Bildiri)

Investigation of Physical and Mechanical Properties of Lightweight Geopolymer Mortars with Pumice Aggregate Belonging to Kayseri Region

Barkhadle A. N., İlkentapar S., Durak U., Karahan O., Atiş C. D.
3.International Congress on Construction Materials Engineering and Arhitecture, Gaziantep, Türkiye, 25 Haziran 2023, ss.69-70, (Özet Bildiri)

ALKALİ İLE AKTİFLEŞTİRİLMİŞ CÜRUF HARÇLARINDA GERİ KAZANILMIŞ BETON AGREGASININ KULLANILMASI

Bayram U., Durak U.
ANKARA INTERNATIONAL CONGRESS ON SCIENTIFIC RESEARCH-VII, Ankara, Türkiye, 2 - 04 Aralık 2022, cilt.1, sa.1, ss.540-547, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

Kutu Kesitli Betonarme kiriş Davranışının Statik Yükler Altında Deneysel Araştırılması

ALTUN F., ARI K., KARAHAN O., Özcan D. M.
Advences in Civil Engineering 6th International Congress, Türkiye, 1 - 04 Eylül 2004, ss.131-140, (Tam Metin Bildiri)

EFFECTS OF DRY PARTICLE COATING WITH NANO-AND MICROPARTICLES ON EARLY COMPRESSIVE STRENGTH OF PORTLAND CEMENT PASTES

Yorulmaz H., Özuzun S., Uzal B., İlkentapar S., Durak U., Karahan O., et al.
INTERNATIONAL CONGRESS ON ART AND DESIGN RESEARCH AND EXHIBITION, Niğde, Türkiye, 21 - 22 Haziran 2021, ss.1-9, (Tam Metin Bildiri)

CAM TOZUNUN KÖPÜK BETONUN DAYANIM VE ISI İLETKENLİĞİNE ETKİSİ

Kılıç E. İ., Durak U., İlkentapar S., Karahan O., Atiş C. D.
IV. BASKENT INTERNATIONAL CONFERENCE ON MULTIDISCIPLINARY STUDIES, Ankara, Türkiye, 4 - 06 Ağustos 2023, ss.280-281, (Özet Bildiri)

ÇİNKO-KURŞUN ÜRETİM TESİSİ ATIKLARININ BETON PARKE TAŞLARINDA KULLANILMASI

Canpolat H., Gökşen Y., İlkentapar S., Durak U., Karahan O., Atiş C. D.
INTERNATIONAL CONGRESS ON ART AND DESIGN RESEARCH AND EXHIBITION, Niğde, Türkiye, 21 - 22 Haziran 2021, ss.1-10, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

Investigation of Mechanical Properties of Pumice Aggregate Geopolymer Lightweight Mortars

Geldim R. A., Örklemez E., İlkentapar S., Durak U., Karahan O., Atiş C. D.
2. International Pumice and Perlite Symposium (PuPeS'23 Cappadocia), Nevşehir, Türkiye, 7 - 09 Eylül 2023, ss.1-2, (Özet Bildiri)

An Experimental Study On Sulfate Resistance of Portland Cement Concrete

HAKTANIR T., KARAHAN O., ARI K., ALTUN F., Bekmezci M.
Creating The Future 2. FAE International Symposium, Kıbrıs (Kktc), 1 - 04 Ekim 2002, ss.139-144, (Tam Metin Bildiri)

Mantolu Betonarme Kirişlerin Kırılma Özelliklerinin Deneysel İncelenmesi

ALTUN F., Vekli M., Özcan D. M., KARAHAN O.
Balıkesir Üniversitesi IV. Mühendislik Mimarlık Sempozyumu, Balıkesir, Türkiye, 1 - 04 Nisan 2002, ss.469-477, (Tam Metin Bildiri)

Indirect Determination of In-Situ Compressive Strength of Concrete as a Function of Ultrasonic Pulse Velocity

HAKTANIR T., ALTUN F., KARAHAN O., ARI K., Bekmezci M.
Uluslararası Yapı ve Deprem Mühendisliği Sempozyumu, Orta Doğu Teknik Üniversitesi, Türkiye, 1 - 04 Eylül 2002, ss.462-468, (Tam Metin Bildiri)

The effect of industrial oil on the properties of fresh and hardened concrete mortars.

ATİŞ C. D., LUGA E., ALMAZ ÖZCAN Z., İLKENTAPAR S.
2 nd International Balkans Conference on Challenges of Civil Engineering, BCCCE, 23-25 May 2013, EPOKA University, Tirana, ALBANIA., Tiran, Arnavutluk, 23 - 25 Mayıs 2013, ss.78-81, (Tam Metin Bildiri)

Alkali ile aktive edilen farklı oranlarda yüksek fırın cürufu ve uçucu kül içeren harçların dayanım özellikleri

Almaz Özcan Z., Karahan O., İlkentapar S., Durak U., Naji Al-Azzawi Z. H., Atiş C. D.
2nd International Eurasian Conference on Science, Engineering and Technology (EurasianSciEnTech 2020), Gaziantep, Türkiye, 7 - 09 Ekim 2020, ss.164, (Özet Bildiri) Sürdürülebilir Kalkınma

Study on Flow and Compressive Strength Properties of Mortars Using Waste Slag

KARAHAN O., ATİŞ C. D., İLKENTAPAR S., ALMAZ ÖZCAN Z.
International Conference on Civil and Environmental Engineering, Nevşehir, Türkiye, 20 - 23 Mayıs 2015, ss.348, (Özet Bildiri)

Strength properties of fly ash and blast furnace slag-based geopolymer mortar

Almaz Özcan Z., Karahan O., İlkentapar S., Durak U., Atiş C. D.
1. Internatioanl Techonolical Sciences and Design Symposium, Giresun, Türkiye, 27 - 29 Haziran 2018, sa.0, ss.1645-1653, (Tam Metin Bildiri) Sürdürülebilir Kalkınma