High volume fly ash abrasion resistant concrete


Atis C. D.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING, vol.14, no.3, pp.274-277, 2002 (SCI-Expanded) identifier identifier

Abstract

In this work, the abrasion resistance of high volume fly ash concrete was investigated. Concrete mixtures containing a large amount of fly ash replacing the cement in mass basis at 50 and 70% were prepared with various water-cementitious material ratios. A specially selected superplasticizer was employed to maintain the workability of the concrete. Volume loss of the specimen was considered as the abrasion value measured using a Dorry abrasion machine. Comparisons were made between normal portland cement (NPC) concrete and fly ash concrete. Comparisons were also made between fly ash concretes with 50 and 70% replacement. Investigation results have shown that the abrasion resistance increased as compressive strength increased. Analysis of the results showed that, for high strength grades (>40 MPa), the abrasion resistance of high volume fly ash concrete with 70% replacement with cement was found to be higher than that of counterpart control NPC concrete and concrete made with 50% fly ash. Superplasticizer and curing conditions have no significant influence on the general trend of the abrasion of concrete studied.