Prof. Dr. MUSTAFA KEMAL APALAK

Applied Composite Materials , cilt.30, sa.3, ss.955-985, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma

Low-Speed Oblique Impact Response of Adhesively Bonded Dissimilar Single-Lap Joints

Journal of Aerospace Engineering , cilt.35, sa.5, 2022 (SCI-Expanded)

Experimental Investigation of Oblique Impact Behavior of Adhesively Bonded Composite Single-Lap Joints

Çalışkan U., Apalak M. K.

APPLIED COMPOSITE MATERIALS , cilt.29, sa.3, ss.1293-1319, 2022 (SCI-Expanded)

Evaluation of geometrically nonlinear and elastoplastic behavior of functionally graded plates under mechanical loading-unloading

Arslan K., Güneş R., Apalak M. K., Reddy J.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES , cilt.29, sa.11, ss.1587-1600, 2022 (SCI-Expanded)

Flexural impact response and damage detection of composite sandwich beam with various PVC foam cores

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES , cilt.29, sa.9, ss.1276-1293, 2022 (SCI-Expanded)

Low-speed bending impact behaviour of adhesively bonded dissimilar single-lap joints

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.36, sa.16, ss.1794-1822, 2022 (SCI-Expanded)

Loading-rate effect on tensile and bending strength of 3D-printed polylactic acid adhesively bonded joints

Çalışkan U., Ekici R., Yildiz Bayazit A., Apalak M. K.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.36, sa.3, ss.317-344, 2022 (SCI-Expanded)

Numerical investigation on normal and oblique ballistic impact behavior of functionally graded plates

Güneş R., Hakan M., Apalak M. K., Reddy J.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES , cilt.28, sa.20, ss.2114-2130, 2021 (SCI-Expanded)

Numerical model for composite patch repair of notched aluminum plates under impact loading

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS , cilt.235, sa.5, ss.958-973, 2021 (SCI-Expanded)

Experimental study on structure optimization of functionally graded sandwich plates under ballistic impact

AYDIN M., APALAK M. K., APALAK Z. G.

JOURNAL OF COMPOSITE MATERIALS , cilt.54, sa.26, ss.3967-3980, 2020 (SCI-Expanded)

Elastic flexural analysis of adhesively bonded similar and dissimilar beams using refined zigzag theory and peridynamic differential operator

DÖRDÜNCÜ M., APALAK M. K.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES , cilt.101, 2020 (SCI-Expanded)

Thermoelastic analysis of temperature-dependent functionally graded rectangular plates using finite element and finite difference methods

Demirbaş M. D., Ekici R., Apalak M. K.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES , cilt.27, ss.707-724, 2020 (SCI-Expanded)

A study on low-velocity impact performance of notched GFRP composites repaired by different composite patches: Experiment and modeling

Çalışkan U., Ekici R., Yıldız E., Apalak M. K.

POLYMER COMPOSITES , cilt.41, sa.4, ss.1323-1340, 2020 (SCI-Expanded)

Impact penetration and perforation performance of square sandwich panels with EPS foam core

Demirbaş M. D., Apalak M. K.

SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES , cilt.45, sa.1, 2020 (SCI-Expanded)

Thermal stress analysis of one- and two-dimensional functionally graded plates subjected to in-plane heat fluxes

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS , cilt.233, ss.546-562, 2019 (SCI-Expanded)

Stress wave propagation in adhesively bonded functionally graded cylinders: an improved model

Dorduncu M., Apalak M. K., Reddy J. N.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.33, ss.156-186, 2019 (SCI-Expanded)

Bending impact behaviour of sandwich beams with expanded polystyrene foam core: Analysis

Çalışkan U., Apalak M. K.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS , cilt.21, ss.230-259, 2019 (SCI-Expanded)

Low speed impact behaviour of adhesively bonded foam-core sandwich T-joints

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.33, sa.3, ss.217-242, 2019 (SCI-Expanded)

Ballistic performance of honeycomb sandwich structures reinforced by functionally graded face plates

GÜNEŞ R., ARSLAN K., APALAK M. K., REDDY J. N.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS , cilt.21, sa.1, ss.211-229, 2019 (SCI-Expanded)

Investigation of the Thermo-elastic Response of Adhesively Bonded Two-Dimensional Functionally Graded Circular Plates Based on Theory of Elasticity

DÖRDÜNCÜ M., APALAK M. K., Reddy J.

IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF MECHANICAL ENGINEERING , cilt.42, sa.4, ss.415-433, 2018 (SCI-Expanded)

Stress wave propagation in a functionally graded adhesive layer between two identical cylinders

JOURNAL OF ADHESION , cilt.0, sa.0, ss.1-36, 2018 (SCI-Expanded)

Thermal stress analysis of in-plane two-directional functionally graded plates subjected to in-plane edge heat fluxes

Atahan M. G., Apalak M. K.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS , cilt.232, sa.8, ss.693-716, 2018 (SCI-Expanded)

Experimental tests and numerical modeling of ballistic impact on honeycomb sandwich structures reinforced by functionally graded plates

ARSLAN K., GÜNEŞ R., APALAK M. K., REDDY J. N.

JOURNAL OF COMPOSITE MATERIALS , cilt.51, sa.29, ss.4009-4028, 2017 (SCI-Expanded)

Low-speed bending impact behavior of adhesively bonded single-lap joints

Journal of Adhesion Science and Technology , cilt.31, ss.1545-1575, 2017 (SCI-Expanded)

Low velocity bending impact behavior of foam core sandwich beams: Experimental

Çalışkan U., Apalak M. K.

Composites Part B: Engineering , cilt.112, ss.158-175, 2017 (SCI-Expanded)

Experimental damage analysis of Al/SiC functionally graded sandwich plates under ballistic impact

AYDIN M., APALAK M. K.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.671, ss.107-117, 2016 (SCI-Expanded)

Stress wave propagation in adhesively bonded functionally graded circular cylinders

Dorduncu M., APALAK M. K.

Journal of Adhesion Science and Technology , cilt.30, sa.12, ss.1281-1309, 2016 (SCI-Expanded)

Thermal residual stresses in in-plane functionally graded clamped hollow circular plates subjected to an edge heat flux

Dorduncu M., APALAK M. K., Cherukuri H. P.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS , cilt.229, sa.3, ss.236-260, 2015 (SCI-Expanded)

Elastic wave propagation in functionally graded circular cylinders

COMPOSITES PART B-ENGINEERING , cilt.73, ss.35-48, 2015 (SCI-Expanded)

Stress wave propagation in adhesively bonded similar and dissimilar circular cylinders

Dorduncu M., APALAK M. K.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.29, sa.8, ss.778-806, 2015 (SCI-Expanded)

Experimental investigation on transverse low-speed impact behavior of adhesively bonded similar and dissimilar clamped plates

Yildirim M., APALAK M. K.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.28, sa.13, ss.1219-1242, 2014 (SCI-Expanded)

Free vibration analysis of an adhesively bonded functionally graded double containment cantilever joint

APALAK Z. G., EKİCİ R., Yildirim M., APALAK M. K.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.28, sa.12, ss.1117-1139, 2014 (SCI-Expanded)

Simulated and actual micro-structure models on the indentation behaviors of particle reinforced metal matrix composites

EKİCİ R., APALAK M. K., Yildirim M., NAİR F.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.606, ss.290-298, 2014 (SCI-Expanded)

The Artificial Bee Colony algorithm in layer optimization for the maximum fundamental frequency of symmetrical laminated composite plates

APALAK M. K., KARABOĞA D., AKAY B.

ENGINEERING OPTIMIZATION , cilt.46, sa.3, ss.420-437, 2014 (SCI-Expanded)

Experimental and numerical investigations of low velocity impact on functionally graded circular plates

GÜNEŞ R., AYDIN M., APALAK M. K., Reddy J. N.

COMPOSITES PART B-ENGINEERING , cilt.59, ss.21-32, 2014 (SCI-Expanded)

Functionally Graded Adhesively Bonded Joints : critical review

REVIEWS OF ADHESION AND ADHESIVES , cilt.2, ss.56-84, 2014 (SCI-Expanded)

Thermal residual stresses in adhesively bonded in-plane functionally graded clamped circular hollow plates

EKİCİ R., APALAK M. K., Yildirim M.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.27, sa.14, ss.1590-1623, 2013 (SCI-Expanded)

Layer Optimization for Maximum Fundamental Frequency of Rigid Point-Supported Laminated Composite Plates

APALAK Z. G., APALAK M. K., EKİCİ R., YILDIRIM M.

POLYMER COMPOSITES , cilt.32, sa.12, ss.1988-2000, 2011 (SCI-Expanded)

Indentation behavior of functionally graded Al-SiC metal matrix composites with random particle dispersion

COMPOSITES PART B-ENGINEERING , cilt.42, sa.6, ss.1497-1507, 2011 (SCI-Expanded)

Impact performance of Al/SiC functionally graded circular plates

APALAK M. K., GÜNEŞ R., AYDIN M., Reddy J. N.

INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY , cilt.42, ss.56-65, 2011 (SCI-Expanded)

Effect of Adhesive Thickness on Transverse Low-Speed Impact Behavior of Adhesively Bonded Similar and Dissimilar Clamped Plates

APALAK M. K., Yildirim M.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.25, sa.19, ss.2587-2613, 2011 (SCI-Expanded)

THERMAL RESIDUAL STRESSES IN ONE-DIRECTIONAL FUNCTIONALLY GRADED PLATES SUBJECTED TO IN-PLANE HEAT FLUX

Bagci M. D., APALAK M. K.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS , cilt.60, sa.1, ss.50-83, 2011 (SCI-Expanded)

Transverse Low-Speed Impact Behavior of Adhesively Bonded Similar and Dissimilar Clamped Plates

Yildirim M., APALAK M. K.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.25, ss.69-91, 2011 (SCI-Expanded)

The elasto-plastic impact analysis of functionally graded circular plates under low-velocities

GÜNEŞ R., AYDIN M., APALAK M. K., REDDY J. N.

COMPOSITE STRUCTURES , cilt.93, sa.2, ss.860-869, 2011 (SCI-Expanded)

Free Vibration Analysis of an Adhesively Bonded Functionally Graded Tubular Single Lap Joint

GÜNEŞ R., APALAK M. K., Yildirim M.

JOURNAL OF ADHESION , cilt.87, sa.9, ss.902-925, 2011 (SCI-Expanded)

Thermal Residual Stresses in Adhesively Bonded In-plane Functionally Graded Clamped Plates Subjected to an Edge Heat Flux

APALAK M. K., Bagci M. D.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.25, sa.15, ss.1861-1908, 2011 (SCI-Expanded)

Effects of random particle dispersion and size on the indentation behavior of SiC particle reinforced metal matrix composites

EKİCİ R., APALAK M. K., Yildirim M., NAİR F.

MATERIALS & DESIGN , cilt.31, sa.6, ss.2818-2833, 2010 (SCI-Expanded)

Free vibration analysis of adhesively bonded single lap joints with wide and narrow functionally graded plates

GÜNEŞ R., APALAK M. K., Yildirim M., ÖZKEŞ I.

COMPOSITE STRUCTURES , cilt.92, sa.1, ss.1-17, 2010 (SCI-Expanded)

Effects of Random Particle Dispersion and Particle Volume Fraction on the Indentation Behavior of SiC Particle-Reinforced Metal-Matrix Composites

APALAK M. K., EKİCİ R., Yildirim M., NAİR F.

JOURNAL OF COMPOSITE MATERIALS , cilt.43, sa.26, ss.3191-3210, 2009 (SCI-Expanded)

Free Vibration Analysis and Optimal Design of a Clamped-free Single Lap Joint with Unidirectional Laminated Narrow Plates

APALAK M. K., Yildirim M.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS , cilt.22, sa.2, ss.183-211, 2009 (SCI-Expanded)

Determination of Structural Damping and Optimal Vibration Control of an Adhesively-Bonded Double Containment Cantilever Joint

APALAK M. K., EKİCİ R., Yildirim M., Erkaya S.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.23, sa.2, ss.339-359, 2009 (SCI-Expanded)

Free vibration analysis and optimal design of an adhesively bonded double containment cantilever joint

APALAK M. K., EKİCİ R., Yildirim M.

JOURNAL OF SCIENTIFIC & INDUSTRIAL RESEARCH , cilt.67, sa.10, ss.797-806, 2008 (SCI-Expanded)

Layer optimisation for maximum fundamental frequency of laminated composite plates for different edge conditions

APALAK M. K., Yildirim M., EKİCİ R.

COMPOSITES SCIENCE AND TECHNOLOGY , cilt.68, sa.2, ss.537-550, 2008 (SCI-Expanded)

Non-linear elastic stresses in a thin hard coating/an elastic substrate system subjected to a surface pressure distribution

Apalak M. K., Taşdemirci A.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.190, ss.263-281, 2007 (SCI-Expanded)

The free vibration analysis and optimal design of an adhesively bonded functionally graded single lap joint

Gunes R., Apalak M. K., Yildirim M.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES , cilt.49, sa.4, ss.479-499, 2007 (SCI-Expanded)

Free vibration analysis and optimal design of a cantilevered adhesively bonded composite tabular single lap joint

Apalak M. K., Yildirim M.

POLYMERS & POLYMER COMPOSITES , cilt.15, sa.6, ss.489-506, 2007 (SCI-Expanded)

Elastic flexural behaviour of an adhesively bonded single lap joint with functionally graded adherends

Kemal Apalak M. K., Gunes R.

MATERIALS & DESIGN , cilt.28, sa.5, ss.1597-1617, 2007 (SCI-Expanded)

Thermal residual stresses in an adhesively bonded functionally graded tubular single lap joint

Apalak M. K., Gunes R., Eroglu S.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES , cilt.27, sa.1, ss.26-48, 2007 (SCI-Expanded)

Optimal vibration attenuation of an adhesively-bonded cantilevered single-lap joint

Apalak M. K., Yildirim M.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.21, ss.267-286, 2007 (SCI-Expanded)

Free vibration analysis and design of an adhesively bonded corner joint with double support

Apalak M. K., Ekici R., Yildirim M.

JOURNAL OF ADHESION , cilt.83, sa.11, ss.957-986, 2007 (SCI-Expanded)

Progressive damage modeling of an adhesively bonded composite single lap joint under flexural loads at the mesoscale level

Apalak Z. G., Apalak M. K., Genc M. S.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , cilt.26, sa.9, ss.903-953, 2007 (SCI-Expanded)

Progressive damage modeling of an adhesively bonded unidirectional composite single-lap joint in tension at the mesoscale level

Apalak Z. G., Apalak M. K., Genc M. S.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS , cilt.19, sa.6, ss.671-702, 2006 (SCI-Expanded)

Stress analysis of an adhesively bonded functionally graded tubular single lap joint subjected to an internal pressure

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS , cilt.13, sa.3, ss.183-211, 2006 (SCI-Expanded)

Thermal residual stresses in an adhesively-bonded functionally graded single-lap joint

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.20, sa.12, ss.1295-1320, 2006 (SCI-Expanded)

Optimal design of an adhesively-bonded corner joint with single support based on the free vibration analysis

Apalak M. K., Ekici R., Yildirim M.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.20, sa.13, ss.1507-1528, 2006 (SCI-Expanded)

Elastic stresses in an adhesively-bonded functionally-graded tubular single-lap joint in tension

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.20, sa.9, ss.1019-1046, 2006 (SCI-Expanded)

Investigation of elastic stresses in an adhesively bonded single lap joint with functionally graded adherends in tension

COMPOSITE STRUCTURES , cilt.70, sa.4, ss.444-467, 2005 (SCI-Expanded)

Thermal residual stress analysis of Ni-Al2O3, Ni-TiO2, and Ti-SiC functionally graded composite plates subjected to various thermal fields

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS , cilt.18, sa.2, ss.119-152, 2005 (SCI-Expanded)

Thermal and geometrically nonlinear stress analyses of an adhesively bonded composite tee joint with double support

Apalak M. K., Apalak Z. G., Gunes R.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS , cilt.17, sa.2, ss.103-136, 2004 (SCI-Expanded)

Effect of adhesive free-end geometry on the initiation and propagation of damaged zones in adhesively bonded lap joints

Apalak M. K., Engin A.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.18, sa.5, ss.529-559, 2004 (SCI-Expanded)

Thermal non-linear stresses in an adhesively bonded and laser-spot welded single-lap joint during laser-metal interaction

Apalak M. K., Aldaş K., Şen F.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.142, sa.1, ss.1-19, 2003 (SCI-Expanded)

Steady-state thermal and geometrical adhesively bonded tee joint non-linear stress analysis of an with double support

Apalak M. K., Apalak Z. G., Gunes R., Karakaş E. S.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES , cilt.23, sa.2, ss.115-130, 2003 (SCI-Expanded)

An investigation on the initiation and propagation of damaged zones in adhesively bonded lap joints

Apalak M. K., Engin A.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.17, sa.14, ss.1889-1921, 2003 (SCI-Expanded)

Geometrically non-linear thermal stress analysis of an adhesively bonded tubular single lap joint

Apalak M. K., Gunes R., Fidancı L.

FINITE ELEMENTS IN ANALYSIS AND DESIGN , cilt.39, sa.3, ss.155-174, 2003 (SCI-Expanded)

Thermal non-linear elastic stress analysis of an adhesively bonded T-joint

Apalak M. K., Apalak Z. G., Gunes R.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.17, sa.7, ss.995-1016, 2003 (SCI-Expanded)

Thermal and geometrically non-linear stress analyses of an adhesively bonded composite tee joint

Apalak M. K., Gunes R., Turaman M. Ö., Cerit A. A.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING , cilt.34, sa.2, ss.135-150, 2003 (SCI-Expanded)

On non-linear thermal stresses in an adhesively bonded single lap joint

COMPUTERS & STRUCTURES , cilt.80, sa.1, ss.85-98, 2002 (SCI-Expanded)

On the non-linear elastic stresses in an adhesively bonded T-joint with double support

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.16, sa.4, ss.459-491, 2002 (SCI-Expanded)

Geometrically non-linear analysis of adhesively bonded corner joints

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.13, sa.11, ss.1253-1285, 1999 (SCI-Expanded)

Geometrically non-linear analysis of adhesively bonded modified double containment corner joints - II

Apalak Z. G., Apalak M. K., Davies R.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.12, sa.2, ss.135-160, 1998 (SCI-Expanded)

Geometrically non-linear analysis of adhesively bonded double containment cantilever joints

Apalak M. K., Engin A.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.11, sa.9, ss.1153-1195, 1997 (SCI-Expanded)

Analysis and design of tee joints with double support

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES , cilt.16, sa.3, ss.187-214, 1996 (SCI-Expanded)

Analysis and design of adhesively bonded modified double containment corner joints .2.

Apalak M. K., Davies R., Apalak Z. G.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.10, sa.10, ss.907-937, 1996 (SCI-Expanded)

Analysis and design of adhesively bonded tee joints with a single support plus angled reinforcement

Gul Apalak Z., Kemal Apalak M. K., Davies R.

Journal of Adhesion Science and Technology , cilt.10, sa.8, ss.681-724, 1996 (SCI-Expanded)

ANALYSIS AND DESIGN OF ADHESIVELY-BONDED DOUBLE-CONTAINMENT CORNER JOINTS

APALAK M. K., Davies R., APALAK Z. G.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.9, sa.2, ss.267-293, 1995 (SCI-Expanded)

ANALYSIS AND DESIGN OF ADHESIVELY BONDED CORNER JOINTS - FILLET EFFECT

APALAK M. K., Davies R.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES , cilt.14, sa.3, ss.163-174, 1994 (SCI-Expanded)

ANALYSIS AND DESIGN OF ADHESIVELY BONDED CORNER JOINTS

APALAK M. K., Davies R.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES , cilt.13, sa.4, ss.219-235, 1993 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Flexural impact Response of Cracked Sandwich Beams Repaired by Composite Patches

ÇALIŞKAN U., EKİCİ R., APALAK M. K.

Uluslararası Muhendislik Arastirma ve Gelistirme Dergisi , cilt.13, ss.438-447, 2021 (Hakemli Dergi)

Improved Mathematical Models of Thermal Residual Stresses in Functionally Graded Adhesively Bonded Joints: A Critical Review

Çalışkan U., Ekici R., Apalak M. K.

Reviews of Adhesion and Adhesives , cilt.7, sa.4, ss.367-416, 2019 (ESCI)

Kompozit Yamalar ile Tamir Edilen Hasarlı Kompozit Plakaların Düşük Hızlı Darbe Davranışı

Mehmet Akif Ersoy Üniversitesi Uygulamalı Bilimler Dergisi , cilt.3, ss.47-64, 2019 (Hakemli Dergi)

Thermal residual stresses analyses of two-dimensional functionally graded circular plates with temperature-dependent material properties

International Journal of Engineering Research and Development , cilt.10, sa.2, ss.202-213, 2018 (Hakemli Dergi)

Thermal Stress Analysis of Functionally Graded Modulus Adhesive Joints

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.21, sa.2, ss.445-456, 2018 (ESCI)

Thermal residual stresses analyses of two-dimensional functionally graded circular plates with temperature-dependent material properties

Uluslararası Muhendislik Arastirma ve Gelistirme Dergisi , cilt.10, ss.202-213, 2018 (Hakemli Dergi)

Numerical solution of thermal residual stress analysis with finite difference method of functionally graded circular plates

Uluslararası Muhendislik Arastirma ve Gelistirme Dergisi , cilt.10, ss.172-181, 2018 (Hakemli Dergi)

Numerical solution of thermal residual stress analysis with finite difference method of functionally graded circular plates

ULUSLARARASI MÜHENDİSLİK ARAŞTIRMA VE GELİŞTİRME DERGİSİ , cilt.10, sa.1, ss.172-181, 2018 (Hakemli Dergi)

FEM ANALYSES OF LOW VELOCITY IMPACT BEHAVIOUR OF SANDWICH PANELS WITH EPS FOAM CORE

Çalışkan U., Ekici R., Apalak M. K.

JOURNAL OF THERMAL ENGINEERING , cilt.3, sa.6, ss.1544-1552, 2017 (ESCI)

Effect of Composite Patch Geometry in Notched Plates Under Low Velocity Impact

Uluslararası Muhendislik Arastirma ve Gelistirme Dergisi , cilt.9, ss.113-124, 2017 (Hakemli Dergi)

Thermal stress analysıs with finite difference method of functionally graded circular plates

International Journal of Mechanical And Production Engineering, , cilt.5, ss.73-79, 2017 (Hakemli Dergi)

Ballistic Limit of Al-Sic Functionally Graded Armor Plates

GÜNEŞ R., HAKAN M., APALAK M. K.

International Journal of Mechanical and Production Engineering , 2017 (Hakemli Dergi)

Thermal stresses in adhesively bonded joints/patches and their modeling: A critical review

Kemal Apalak M. K.

Reviews of Adhesion and Adhesives , cilt.4, sa.3, ss.223-280, 2016 (ESCI)

Ways to Mitigate Thermal Stresses in Adhesively Bonded Joints/Patches: A Critical Review

ÇALIŞKAN U., Gulsen H., APALAK M. K.

REVIEWS OF ADHESION AND ADHESIVES , cilt.4, sa.3, ss.281-333, 2016 (ESCI)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

New approach for modeling randomly distributed CNT reinforced polymer nanocomposite with van der Waals interactions

International Conference on Advanced Topics in Mechanics of Materials, Structures and Construction, AToMech1 2023, Al-Khobar, Suudi Arabistan, 12 - 14 Mart 2023, cilt.31, ss.55-65

FİBER TAKVİYELİ KOMPOZİTLERİN HASAR TESPİTİNDE KATI VE KABUK SONLU ELEMAN KULLANIMI ETKİSİ: KATI ELEMAN İÇİN BOZUNUM MODELİ

22. ULUSAL MEKANİK KONGRESİ, Adana, Türkiye, 15 Ekim 2021

Thermal stress analysis with finite difference method of functionally graded circular plates

ÇALIŞKAN U., EKİCİ R., APALAK M. K.

70th International Conference on Mechanical and Aerospace Engineering (ICMAE), Madrid, İspanya, 23 - 24 Ağustos 2017, ss.18-24

LOW VELOCITY IMPACT BEHAVIOUR OF DAMAGED COMPOSITE PLATES REPAIRED BY COMPOSITE PATCHES

II. International Scientific and Vocational Studies Congress, Nevşehir, Türkiye, 5 - 09 Temmuz 2018, ss.1418-1427

Thermal-stress analyses of in-plane functionally graded hollow circular plates with finite element and finite difference methods

II. International Scientific and Vocational Studies Congress (BILMES 2018), Nevşehir, Türkiye, 5 - 08 Temmuz 2018, ss.557-558

Heat transfer analyses of in-plane functionally graded hollow circular plates with two numerical methods

II. International Scientific and Vocational Studies Congress (BILMES 2018), Nevşehir, Türkiye, 5 - 08 Temmuz 2018, ss.555-556

Effects of temperature-dependent material properties on thermo-mechanical analysis of in-plane two-dimensional functionally graded circular plates

First International Conference on Mechanics of Advanced Materials and Structures (ICMAMS), Torino, İtalya, 17 - 20 Haziran 2018, ss.1

Thermal residual stress analysis of two-dimensional functionally graded plates with finite element and finite difference methods

4th International Conference on Engineering and Natural Sciences (ICENS), KİEV, Ukrayna, 2 - 06 Mayıs 2018, ss.85

Heat transfer analysis of two-dimensional functionally graded rectangular plates with two numerical methods

ÇALIŞKAN U., EKİCİ R., APALAK M. K.

4th International Conference on Engineering and Natural Sciences (ICENS), KİEV, Ukrayna, 2 - 06 Mayıs 2018, ss.84

Effect of Composite Patch Geometry in Notched Plates Under Low Velocity Impact

I.Uluslararası Bilimsel ve Mesleki Çalışmalar Kongresi, Nevşehir, Türkiye, 5 - 07 Ekim 2017

Thermal residual stresses analyses of one-dimensional functionally graded circular plates

I. International Scientific and Vocational Studies Congress, Nevşehir, Türkiye, 5 - 08 Ekim 2017, ss.386

Heat transfer analyses of one-dimensional functionally graded plates

Demirbaş M. D., Ekici R., Apalak M. K.

I. International Scientific and Vocational Studies Congress, 5 - 08 Ekim 2017, ss.387

Comparison of thermal-stress analysis of functionally graded rectangular plates with finite element and finite difference methods

9th International Conference on Tribology (Balkan Trib'17), Nevşehir, Türkiye, 13 - 15 Eylül 2017, ss.601-609

Heat transfer analysis of functionally graded materials with two numerical methods

Demirbaş M. D., Ekici R., Apalak M. K.

9th International Conference on Tribology (Balkan Trib'17), Nevşehir, Türkiye, 13 - 15 Eylül 2017, ss.595-600

YAPIŞTIRICI İLE BİRLEŞTİRİLMİŞ ALÜMİNYUM TEK BİNDİRME BAĞLANTILARIN DÜŞÜK HIZLI EĞİLME DARBE DAVRANIŞININ İNCELENMESİ

20. Ulusal Mekanik Kongresi, Bursa, Türkiye, 5 - 09 Eylül 2017

Heat transfer analysis of the circular plates with finite difference method

1th International Conference on Applied Analysis and Mathematical Modeling (ICAAMM2017), İstanbul, Türkiye, 3 - 07 Haziran 2017, ss.1

Numerical investigation of single and repeated impacts for foam core sandwich structures

3rd International Conference on Engineering and Natural Sciences (ICENS 2017), Budapest, Macaristan, 3 - 07 Mayıs 2017

Low velocity impact response on steel sandwich panels: An experimental and numerical study

3rd International Conference on Engineering and Natural Sciences, ICENS 2017, Budapest, Macaristan, 3 - 07 Mayıs 2017

Ballistic limit of Al-SiC Functionally Graded Armor Plates

GÜNEŞ R., Hakan M., APALAK M. K.

234. International Conference on Mechanical and Aerospace Engineering, Madrid, İspanya, 3 - 07 Mayıs 2017, ss.15-19

SANDVİÇ L, T, ve Pi ŞEKİLLİ BAĞLANTILARIN DÜŞÜK HIZLI DARBE YÜKLERİ ALTINDAKİ ANALİZLERİ

VI. ULUSAL HAVACILIK VE UZAY KONFERANSI, Kocaeli, Türkiye, 28 Eylül 2016 - 30 Mart 2017, ss.1-10

SANDVİÇ L T ve Pİ ŞEKİLLİ BAĞLANTILARIN DÜŞÜK HIZLI DARBE YÜKLERİ ALTINDAKİ ANALİZLERİ

APALAK M. K., DÖRDÜNCÜ M.

VI. ULUSAL HAVACILIK VE UZAY KONFERANSI, Kocaeli, Türkiye, 28 - 30 Eylül 2016, ss.768-777

Investigation on Ballistic Limit of Functionally Graded Plates

GÜNEŞ R., Hakan M., APALAK M. K., Reddy J.

14th Internayional Symposium on Functionally Graded Materials, Bayreuth, Almanya, 18 - 21 Eylül 2016, ss.1-5

Low Velocity Impact Performance of Honeycomb Sandwich Structures Reinforced by Functionally Graded Face Plates

ARSLAN K., GÜNEŞ R., APALAK M. K., Reddy J.

14th Internayional Symposium on Functionally Graded Materials, Bayreuth, Almanya, 10 - 21 Eylül 2016, ss.126-130

Effect of Number of Layers on the Ballistics Performance of Functionally Graded Sandwich Plates

AYDIN M., APALAK M. K., APALAK Z. G.

14th International Symposium on Functionally Graded Materials, Bayreuth, Almanya, 18 - 21 Eylül 2016, ss.215-218

Stress Wave Propagation in a Functionally Graded Cylinder

14 th International Symposium Functionally Graded Materials Multiscale & Multifunctional Structures, Bayreuth, Almanya, 18 - 21 Eylül 2016, ss.173-177

Investigation on the Ballistic Limit of Functionally Graded Plates

GÜNEŞ R., HAKAN M., APALAK M. K., REDDY J. N.

ISFGMs 2016, 14th International Symposium on Functionally Graded Materials, Multiscale and Multifunctional Structures, 18 - 21 Eylül 2016

YAPIŞTIRICI İLE BİRLEŞTİRİLMİŞ SANDVİÇ T TİPİ BAĞLANTILARIN DÜŞÜK HIZLI DARBE DAVRANIŞI

ÇALIŞKAN U., YILDIRIM M., APALAK M. K.

XIX. ULUSAL MEKANİK KONGRESİ, Trabzon, Türkiye, 24 - 28 Ağustos 2015, ss.292-301

Progressive Failure Analysis of Laminated Composite Plates Under Low Velocity Impact

Güneş R., Alçı M., Hakan M., Apalak M. K.

The 17th International Conference on Machine Design and Production, Bursa, Türkiye, 12 - 15 Temmuz 2016, ss.1-11

Prediction of the Dynamic Response of Repeated Low Velocity Impact on Adhesively Bonded Plates

International Conference on Engineering and Natural Science, SARAYBOSNA, Bosna-Hersek, 25 - 28 Mayıs 2016, ss.2594-2598

The Thermal Stress Analysis of One- and Two-Dimensional Functionally Graded Circular Plates for In-Plane Sinusoidal Heat Flux

İNTERNATİONAL CONFERENCE ON ENGİNEERİNG AND NATURAL SCİENCE, Saray Bosna, Bosna-Hersek, 24 - 28 Mayıs 2016, ss.1-5

Numerical simulations of composite sandwich panels under low velocity impact

International Conference on Engineering and Natural Science, SARAYBOSNA, Bosna-Hersek, 24 - 28 Mayıs 2016, ss.2599-2606

FEM ANALYSES OF LOW VELOCITY IMPACT BEHAVIOUR OF SANDWICH PANELS WITH EPS FOAM CORE

Yıldırım M., Ekici R., Apalak M. K.

CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2016 – ICAME2016, 11 - 13 Mayıs 2016

Stiffness Degradation on Low Speed Impact of Adhesively Bonded Metal Plates

International Conference on Natural Science and Engineering, Kilis, Türkiye, 19 - 20 Mart 2016, ss.1872-1877

Fonksiyonel Kademelendirilmiş Sandviç Plakalarin Balistik Darbe Yükü Altindaki Davranişi Üzerinde Farkli Seramik Bileşenlerinin Etkisinin İncelenmesi

AYDIN M., APALAK M. K., GÜNEŞ R., Reddy J.

XIX. Ulusal Mekanik Kongresi, Trabzon, Türkiye, 24 Ağustos - 28 Kasım 2015

Yapıştırıcı ile Birleştirilmiş Sandviç T Tipi Bağlantıların Düşük Hızlı Darbe Davranışı

ÇALIŞKAN U., APALAK M. K., ARSLAN K.

XIX. Ulusal Mekanik Kongresi, Türkiye, 24 - 28 Ağustos 2015

Alüminyum Plakaların Balistik Performansının Araştırılması

Hakan M., Güneş R., Apalak M. K.

XIX. Ulusal Mekanik Kongresi, Trabzon, Türkiye, 24 - 28 Ağustos 2015, ss.525-535

Fonksiyonel Kademelendirilmiş Plakalar ile Desteklenmiş Bal Peteği Sandviç Yapıların Düşük Hızlı Darbe Davranışlarının İncelenmesi

ARSLAN K., GÜNEŞ R., APALAK M. K., Reddy J.

XIX. Ulusal Mekanik Kongresi, Trabzon, Türkiye, 24 - 28 Ağustos 2015

Numerical Investigations On The Ballistic Performance Of Honeycomb Sandwich Structures Reinforced By Functionally Graded Plates

GÜNEŞ R., ARSLAN K., APALAK M. K., Reddy J.

13th International Symposium on Multiscale, Multifunctional and Functionally Graded Materials, Sao Paulo, Brezilya, 19 - 22 Ekim 2014, ss.16-20

An Experimental Study On Ballistics Performance: Functionally Graded Sandwich Plate Impacted By A 9 Mm Parabellum Projectile

AYDIN M., APALAK M. K., GÜNEŞ R., Reddy J.

13th International Symposium on Multiscale, Multifunctional and Functionally Graded Materials, Sao Paulo, Brezilya, 19 - 22 Ekim 2014, ss.21-24

Numerical Investigations on the Ballistic Performance of Honeycomb Sandwich Structures Reinforced by Funcionally Graded Plates

GÜNEŞ R., ARSLAN K., APALAK M. K., JN R.

Proceedings of the 13th International Symposium on Multiscale, Multifunctional and Functionally Graded Materials, Sao-Paulo, Brezilya, 19 - 22 Ekim 2014, cilt.1, ss.9-13

Alüminyum Plakalar ile Takviyelendirilmiş Alüminyum Bal Peteği Sandviç Yapıların Düşük Hızlı Darbe Davranışlarının İncelenmesi

ARSLAN K., GÜNEŞ R., APALAK M. K.

V. Ulusal Havacılık ve Uzay Konferansı, Kayseri, Türkiye, 8 - 10 Eylül 2014, ss.1-10

IN-PLANE THERMAL RESIDUAL STRESSES IN FUNCTIONALLY GRADED PLATES

12th ASME Biennial Conference on Engineering Systems Design and Analysis (ESDA2014), Copenhagen, Danimarka, 25 - 27 Haziran 2014

IN-PLANE THERMAL RESIDUAL STRESSES IN ADHESIVELY BONDED FUNCTIONALLY GRADED PLATES

Ekici R., Apalak M. K., Yıldırım M.

The sixteenth European Conference for Composite Materials (ECCM16), Seville, İspanya, 22 - 26 Haziran 2014, ss.1-10

Plaklı Bir Damar İle Nıtınol Stent Etkileşimin Sonlu Elemanlar Yöntemiyle İncelenmesi Investigation Of Interaction Between Nitinol Stent And A Vascular Plaque Using Finite Element Method

GÜNEŞ R., ÇAM Ö., APALAK M. K.

6. Biyomekanik Uluslararası Katılımlı Kongre, Sakarya, Türkiye, 28 - 30 Eylül 2012, cilt.16, sa.3, ss.319-329

Plaklı Bir Damar İle Nıtınol Stent Etkileşimin Sonlu Elemanlar Yöntemiyle İncelenmesi

GÜNEŞ R., ÇAM Ö., APALAK M. K.

Uluslararası Katılımlı 6. Biyomekanik Kongresi, Sakarya, Türkiye, 28 - 30 Eylül 2012

Effect of Volume Fraction and Microstructure on the Indentation Behavior of Metal Matrix Composites

, International Symposium on Advances in Applied Mechanics and Modern Information Technology (ISAAM-MIT-11), Baku, Azerbaijan, Baku, Azerbaycan, 1 - 04 Eylül 2011, ss.156-160

Nitinol Stentin Süperelastik Davranışının Analizi

GÜNEŞ R., APALAK M. K., Gölgeli H.

Uluslararası Katılımlı V. Ulusal Biyomekanik Kongresi, İzmir, Türkiye, 23 - 25 Eylül 2010

Low-Velocity Impact Behaviour Of Functionally Graded Circular Plates

GÜNEŞ R., APALAK M. K., AYDIN M., Reddy J. N.

11th International Symposium on Multiscale, Multifunctional and Functionally Graded Materials,Guimarães, Portugal, Portekiz, 1 - 04 Eylül 2010, ss.1

Alüminyum Plakaların Düşük Hızlı Darbe Davranışlarının Deneysel ve Sayısal Olarak İncelenmesi

GÜNEŞ R., APALAK M. K., AYDIN M.

16.Ulusal Mekanik Kongresi, Kayseri, Türkiye, 1 - 04 Temmuz 2009

Fonksiyonel Kademelendirilmiş Dairesel Plakaların Düşük Hızlı Darbe Analizi

GÜNEŞ R., APALAK M. K., AYDIN M.

16.Ulusal Mekanik Kongresi, Kayseri, Türkiye, 1 - 04 Mayıs 2009

, Elastic stresses in adhesively bonded functionally graded single lap joints subjected to mechanical and thermal loads

YILDIRIM M., APALAK M. K., EKİCİ R.

ACE-X 2008 International Conference on Advanced Computational Engineering and Experimenting, Special Session: Adhesive Bonding, Barcelona, Spain, İspanya, 1 - 04 Temmuz 2008, ss.1

Fonksiyonel Kademelendirilmiş Tek Bindirme Bağlantılı Silindirik Plakaların Burkulma Sonrası Davranışları

GÜNEŞ R., APALAK M. K., AYDIN M.

Kayseri VII. Havacılık Sempozyumu, Kayseri, Türkiye, 1 - 04 Temmuz 2008

Yapıştırıcı ile birleştirilmiş alüminyum-çelik sandviç bağlantılarının düşük hızlı darbe davranışlarının incelenmesi

HaSeM'08 Kayseri VII. Havacılık Sempozyumu, Kayseri, Türkiye, 15 - 16 Mayıs 2008, ss.134-137

Al/SiC partikül takviyeli metal matrisli kompozitlerin batma davranışları üzerine partikül hacim oranının etkileri

EKİCİ R., APALAK M. K., YILDIRIM M.

HaSeM'08 Kayseri VII. Havacılık Sempozyumu, Kayseri, Türkiye, 15 - 16 Mayıs 2008, ss.206-212

Free vibration analysis and design of an adhesively bonded composite single lap joint

APALAK M. K., Ekici R., Yildirim M.

ASME International Mechanical Engineering Congress and Exposition, Washington, Amerika Birleşik Devletleri, 11 - 15 Kasım 2007, ss.211-220

Post-buckling of Functionally Graded Cylindrical Shells

GÜNEŞ R., APALAK M. K., Taşdemir H. A.

2007 ASME International Mechanical Engineering Congress and Exposition, Seattle, Washington, Amerika Birleşik Devletleri, 1 - 04 Kasım 2007, ss.1

Fonksiyonel Kademelendirilmiş Küresel Kabukların Burkulma Sonrası Davranışları

GÜNEŞ R., APALAK M. K., Taşdemir H. A.

XV: Ulusal Mekanik Kongresi, Isparta, Türkiye, 3 - 07 Eylül 2007

Fonksiyonel Kademelendirilmiş Dairesel Plakaların Lineer Olmayan Termomekanik Analizleri

GÜNEŞ R., APALAK M. K., Reddy J.

XV. Ulusal Mekanik Kongresi, Isparta, Türkiye, 3 - 07 Eylül 2007

Thermal Residual Stresses in an Adhesively Bonded Functionally Graded Single Lap Joint Subjected to Uniform Temperature Field

GÜNEŞ R., APALAK M. K.

12nd International Conference on Machine Design and Production, UMTIK’2006, Kuşadası, Turkey, Türkiye, 1 - 04 Eylül 2006, ss.1

Failure analysis of an adhesively bonded carbon fiber reinforced polymeric (CFRP) composite single lap joint under flexure loads

APALAK Z. G., GENÇ M. S., APALAK M. K.

7th International Fracture Conference IFC 2005, Kocaeli, Turkey, Türkiye, 1 - 04 Ekim 2005, ss.1

Investigation of Thermal Residual Stresses in an Adhesively Bonded Functionally Graded Single Lap Joint

APALAK Z. G., GENÇ M. S., APALAK M. K.

The Sixth International Congress on Thermal Stresses THERMAL STRESSES 2005, TS-2005, Vienna, Austria, Avusturya, 1 - 04 Mayıs 2005, ss.1

Stress analysis of an adhesively bonded functionally graded single lap joint

GÜNEŞ R., APALAK M. K.

The 11th International Conference on Machine Design and Production UMTIK 2004, METU, Antalya, Turkey, Türkiye, 1 - 04 Ekim 2004, ss.1

Damage zone growth in an adhesively bonded composite single lap joint

The 11th International Conference on Machine Design and Production UMTIK 2004, METU, Antalya, Turkey, Türkiye, 1 - 04 Ekim 2004, ss.1

Thermal residual stress analysis of functionally graded plates

SEMC 2004 : The Second International Conference on Structural Engineering, Mechanics and Computation, Cape Town, South Africa, Güney Afrika, 1 - 04 Temmuz 2004, ss.1

, Thermal Residual Stresses in Multilayered Plates Subjected to Uniform, Linear and Parabolic Temperature Distributions

The Fifth International Congress on Thermal Stresses THERMAL STRESSES 2003, Blacksburg, VA, USA, Amerika Birleşik Devletleri, 1 - 04 Haziran 2003, ss.1

Elasto-plastic Stress Analysis of an Adhesively Bonded Single Lap Joint Subjected to a Bending Moment

APALAK M. K., Engin A.

The 10th International Conference on Machine Design and Production UMTIK 2002, METU, Cappadocia, Turkey, Türkiye, 1 - 04 Eylül 2002, ss.1

Investigation of Thermal Residual Stresses in Multi-layered Plates with Different Material Combinations

GÜNEŞ R., APALAK M. K.

The 10th International Conference on Machine Design and Production UMTIK 2002, METU, Cappadocia, Turkey, Türkiye, 1 - 04 Eylül 2002, ss.1

Geometrically Non-linear Thermal Stress Analysis of an Adhesively Bonded Tee Joint with Single Support plus Angled Reinforcement

APALAK M. K., GÜNEŞ R., Karakaş E. S.

The Fourth International Congress on Thermal Stresses THERMAL STRESSES 2001, Japonya, 1 - 04 Haziran 2001, ss.1

Geometrically Non-linear Thermal Stress Analysis of an Adhesively Bonded Tee Joint with Double Support

SEMC 2001 : The International Conference on Structural Engineering, Mechanics and Computation, Güney Afrika, 1 - 04 Mart 2001, ss.1

On Elastic Contact Stresses in a Thin Hard Coating/an Elastic Substrate System

Taşdemirci A., APALAK M. K.

The 9th International Conference on Machine Design and Production UMTIK 2000, Türkiye, 1 - 04 Eylül 2000, ss.1

Elasto-plastic Stress Analysis of an Adhesively Bonded Single Lap Joint

APALAK M. K., Engin A.

The 9th International Conference on Machine Design and Production UMTIK 2000, Türkiye, 1 - 04 Eylül 2000, ss.1

Effect of Geometrical Non-linearity on the Stress and Deformation States of Adhesive Joints