Prof. Dr. CENGİZ DURAN ATİŞ

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Alkali-Activated Binders as Sustainable Alternatives to Portland Cement and Their Resistance to Saline Water

Luga E., Mustafaraj E., Corradi M., ATİŞ C. D.

MATERIALS , cilt.17, sa.17, 2024 (SCI-Expanded)

Characterizing boron-enhanced one-part alkaline-activated mortars: Mechanical properties, microstructure and environmental impacts

Örklemez E., İLKENTAPAR S., DURAK U., Gülçimen S., Uzal N., Uzal B., et al.

CONSTRUCTION AND BUILDING MATERIALS , cilt.426, 2024 (SCI-Expanded)

Reaction kinetics and properties of pumice-based geopolymer systems cured at room temperature

Kucukyildirim E., Yorulmaz H., Durak U., İlkentapar S., Uzal B., Karahan O., et al.

CONSTRUCTION AND BUILDING MATERIALS , cilt.409, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma

Recycling waste expanded polystyrene as aggregate in produc-tion of lightweight screed mortar

Çelikten S., Atabey İ. İ., Almaz Özcan Z., Durak U., İlkentapar S., Karahan O., et al.

REVISTA DE LA CONSTRUCCION , cilt.22, sa.3, ss.585-596, 2023 (SCI-Expanded)

Effect of Nano-SiO2 on Strength and Hydration Characteristics of Ternary Cementitious Systems

Yorulmaz H., Uzal B., Karahan O., Durak U., İlkentapar S., Atiş C. D.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , sa.48, ss.13649-13660, 2023 (SCI-Expanded)

Influence of Silica Fume Additive and Activator Ratio on Mechanical Properties in Slaked Lime-Based Alkali-Activated Mortars

KAYA M., KARAHAN O., ATİŞ C. D.

IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING , cilt.47, sa.2, ss.873-889, 2023 (SCI-Expanded)

Properties of fly ash-based lightweight-geopolymer mortars containing perlite aggregates: Mechanical, microstructure, and thermal conductivity coefficient

Karakas H., İLKENTAPAR S., DURAK U., Orklemez E., Ozuzun S., KARAHAN O., et al.

CONSTRUCTION AND BUILDING MATERIALS , cilt.362, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma

Synergistic effect of waste glass powder and fly ash on some properties of mortar and notably suppressing alkali-silica reaction

Goksen Y., Durak U., İlkentapar S., Atabey I. I., Kaya M., Karahan O., et al.

REVISTA DE LA CONSTRUCCION , cilt.22, sa.2, ss.419-430, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma

Mechanical properties and efficiency of SIFCON samples at elevated temperature cured with standard and accelerated method

Ali M. H., ATİŞ C. D., Al-Kamaki Y. S. S.

CASE STUDIES IN CONSTRUCTION MATERIALS , cilt.17, 2022 (SCI-Expanded)

The influence of cement kiln dust on strength and durability properties of cement-based systems

Hakkomaz H., Yorulmaz H., Durak U., İlkentapar S., Karahan O., Atiş C. D.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH , cilt.29, sa.50, ss.76166-76175, 2022 (SCI-Expanded) Sürdürülebilir Kalkınma

Examination of mechanical properties and microstructure of alkali activated slag and slag-metakaolin blends exposed to high temperatures

Akcaozoglu S., Ciflikli M., Bozkaya O., ATİŞ C. D., Ulu C.

STRUCTURAL CONCRETE , cilt.23, sa.2, ss.1273-1289, 2022 (SCI-Expanded) Sürdürülebilir Kalkınma

A new parameter influencing the reaction kinetics and properties of fly ash based geopolymers: A pre-rest period before heat curing

Durak U., İlkentapar S., Karahan O., Uzal B., Atiş C. D.

JOURNAL OF BUILDING ENGINEERING , cilt.35, 2021 (SCI-Expanded) Sürdürülebilir Kalkınma

Compressive strength prediction models for cementitious composites with fly ash using machine learning techniques

Sevim U. K., Bilgic H. H., Cansiz O. F., Ozturk M., ATİŞ C. D.

CONSTRUCTION AND BUILDING MATERIALS , cilt.271, 2021 (SCI-Expanded)

Influence of nano SiO2 and nano CaCO3 particles on strength, workability, and microstructural properties of fly ash-based geopolymer

Durak U., Karahan O., Uzal B., İlkentapar S., Atiş C. D.

STRUCTURAL CONCRETE , cilt.22, sa.S1, 2021 (SCI-Expanded) Sürdürülebilir Kalkınma

The influence of activator type and quantity on the transport properties of class F fly ash geopolymer

Atabey I. I., KARAHAN O., Bilim C., ATİŞ C. D.

CONSTRUCTION AND BUILDING MATERIALS , cilt.264, 2020 (SCI-Expanded)

Durability Properties of Geopolymer Mortars Containing Slag

Bingol S., Bilim C., Atiş C. D., Durak U.

IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING , cilt.44, ss.561-569, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma

Very high strength Na2SiO3 and NaOH activated fly ash based geopolymer mortar

Atabey I. I., KARAHAN O., Bilim C., ATİŞ C. D.

CEMENT WAPNO BETON , cilt.25, sa.4, ss.292-305, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma

Investigation of mechanical and thermal properties of nano SiO2/hydrophobic silica aerogel co-doped concrete with thermal insulation properties

Al Zaidi I. K., Demirel B., Atiş C. D., Akkurt F.

STRUCTURAL CONCRETE , cilt.21, sa.3, ss.1123-1133, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma

An investigation of resistance of sodium meta silicate activated slag mortar to acidic and basic mediums

Bingol S., Bilim C., Atiş C. D., Durak U., İlkentapar S., Karahan O.

REVISTA DE LA CONSTRUCCION , cilt.19, sa.1, ss.127-133, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma

Mechanical properties of class C and F fly ash geopolymer mortars

Kaya M., Uysal M., Yilmaz K., KARAHAN O., ATİŞ C. D.

GRADEVINAR , cilt.72, sa.4, ss.297-309, 2020 (SCI-Expanded)

Experimental investigation on properties of recycled aggregate concrete with optimized Ball Milling Method

DİLBAS H., ÇAKIR Ö., ATİŞ C. D.

CONSTRUCTION AND BUILDING MATERIALS , cilt.212, ss.716-726, 2019 (SCI-Expanded) Sürdürülebilir Kalkınma

Resistance of polypropylene fibered mortar to elevated temperature under different cooling regimes

Karahan O., Durak U., İlkentapar S., Atabey I. I., Atiş C. D.

REVISTA DE LA CONSTRUCCION , cilt.18, sa.2, ss.386-397, 2019 (SCI-Expanded)

Influence of waste marble powder as a replacement of cement on the properties of mortar

Yamanel K., Durak U., İlkentapar S., Atabey I. I., Karahan O., Atiş C. D.

REVISTA DE LA CONSTRUCCION , cilt.18, sa.2, ss.290-300, 2019 (SCI-Expanded)

Estimation of Compressive Strength of Concrete Using Physico-Mechanical Properties of Aggregate Rock

Kilic A., Teymen A., Ozdemir O., ATİŞ C. D.

IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING , cilt.43, ss.171-178, 2019 (SCI-Expanded)

Effect of different storage methods on thermal and mechanical properties of mortar containing aerogel, fly ash and nano-silica

Al Zaidi A. K. A., DEMİREL B., ATİŞ C. D.

CONSTRUCTION AND BUILDING MATERIALS , cilt.199, ss.501-507, 2019 (SCI-Expanded)

Optimization of heat cured fly ash/slag blend geopolymer mortars designed by "Combined Design" method: Part 1

LUGA E., ATİŞ C. D.

CONSTRUCTION AND BUILDING MATERIALS , cilt.178, ss.393-404, 2018 (SCI-Expanded)

The effect of coarse to fine aggregate ratio on the fresh and hardened properties of roller-compacted concrete pavement

HASHEMI M., SHAFIGH P., BIN KARIM M. R., ATİŞ C. D.

CONSTRUCTION AND BUILDING MATERIALS , cilt.169, ss.553-566, 2018 (SCI-Expanded)

Behaviour of Geopolymer Mortars after Exposure to Elevated Temperatures

Kaya M., Uysal M., Yilmaz K., ATİŞ C. D.

MATERIALS SCIENCE-MEDZIAGOTYRA , cilt.24, sa.4, ss.428-436, 2018 (SCI-Expanded)

Influence of duration of heat curing and extra rest period after heat curing on the strength and transport characteristic of alkali activated class F fly ash geopolymer mortar

İlkentapar S., Atiş C. D., Karahan O., Avsaroglu E. B. G.

CONSTRUCTION AND BUILDING MATERIALS , cilt.151, ss.363-369, 2017 (SCI-Expanded)

Investigation of mechanical properties of mortars with carbon fiber using multi slice computed tomography

Sola O. C., Erdem S., Bostanci L., ATİŞ C. D., Sayin B.

REVISTA DE LA CONSTRUCCION , cilt.16, sa.1, 2017 (SCI-Expanded)

Ground Granulated Pumice-Based Cement Mortars Exposed to Abrasion and Fire

KARAHAN O., Hossain K. M. A., ATİŞ C. D., Lachemi M., Ozbay E.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.42, sa.3, ss.1321-1326, 2017 (SCI-Expanded)

Identifying the bond and abrasion behavior of alkali activated concretes by central composite design method

Balcikanli M., Turker H. T., Ozbay E., KARAHAN O., ATİŞ C. D.

CONSTRUCTION AND BUILDING MATERIALS , cilt.132, ss.196-209, 2017 (SCI-Expanded)

Strength properties of slag/fly ash blends activated with sodium metasilicate

LUGA E., ATİŞ C. D., KARAHAN O., İLKENTAPAR S., Gorur E. B.

GRADEVINAR , cilt.69, sa.3, ss.199-205, 2017 (SCI-Expanded)

Effects of milled cut steel fibers on the properties of concrete

Karahan O., Ozbay E., ATİŞ C. D., Lachemi M., Hossain K. M. A.

KSCE JOURNAL OF CIVIL ENGINEERING , cilt.20, sa.7, ss.2783-2789, 2016 (SCI-Expanded)

The influence of elevated temperature on strength and microstructure of high strength concrete containing ground pumice and metakaolin

SARIDEMIR M., SEVERCAN M. H., CIFLIKLI M., CELIKTEN S., OZCAN F., ATİŞ C. D.

CONSTRUCTION AND BUILDING MATERIALS , cilt.124, ss.244-257, 2016 (SCI-Expanded)

Strength Properties of Slag/Fly Ash Blends Activated with Sodium Metasilicate and Sodium Hydroxide plus Silica Fume

LUGA E., ATİŞ C. D.

PERIODICA POLYTECHNICA-CIVIL ENGINEERING , cilt.60, sa.2, ss.223-228, 2016 (SCI-Expanded)

COMPARISON OF MULTI LAYER PERCEPTRON (MLP) AND RADIAL BASIS FUNCTION (RBF) FOR CONSTRUCTION COST ESTIMATION: THE CASE OF TURKEY

BAYRAM S., ÖCAL M. E., Laptali Oral E., ATİŞ C. D.

JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT , cilt.22, sa.4, ss.480-490, 2016 (SCI-Expanded)

Very high strength (120 MPa) class F fly ash geopolymer mortar activated at different NaOH amount, heat curing temperature and heat curing duration

Atis C. D., Gorur E. B., Karahan O., Bilim C., Ilkentapar S., LUGA E.

CONSTRUCTION AND BUILDING MATERIALS , cilt.96, ss.673-678, 2015 (SCI-Expanded)

Effects of chemical admixtures and curing conditions on some properties of alkali-activated cementless slag mixtures

Bilim C., KARAHAN O., ATİŞ C. D., İLKENTAPAR S.

KSCE JOURNAL OF CIVIL ENGINEERING , cilt.19, sa.3, ss.733-741, 2015 (SCI-Expanded)

Dual effectiveness of freezing-thawing and sulfate attack on high-volume slag-incorporated ECC

Ozbay E., KARAHAN O., Lachemi M., Hossain K. M. A., ATİŞ C. D.

COMPOSITES PART B-ENGINEERING , cilt.45, sa.1, ss.1384-1390, 2013 (SCI-Expanded)

Thermal conductivity, compressive strength and ultrasonic wave velocity of cementitious composite containing waste PET lightweight aggregate (WPLA)

Akçaözoğlu S., Akçaözoğlu K., ATİŞ C. D.

COMPOSITES PART B-ENGINEERING , cilt.45, sa.1, ss.721-726, 2013 (SCI-Expanded)

Influence of admixtures on the properties of alkali-activated slag mortars subjected to different curing conditions

Bilim C., KARAHAN O., ATİŞ C. D., İlkentapar S.

MATERIALS & DESIGN , cilt.44, ss.540-547, 2013 (SCI-Expanded)

The effects of pyrite ash on the compressive strength properties of briquettes

Sola O. C., Atis C. D.

KSCE JOURNAL OF CIVIL ENGINEERING , cilt.16, sa.7, ss.1225-1229, 2012 (SCI-Expanded)

Investigation of Properties of Engineered Cementitious Composites Incorporating High Volumes of Fly Ash and Metakaolin

Ozbay E., KARAHAN O., Lachemi M., Hossain K. M. A., ATİŞ C. D.

ACI MATERIALS JOURNAL , cilt.109, sa.5, ss.565-571, 2012 (SCI-Expanded)

Fresh, Mechanical, Transport, and Durability Properties of Self-Consolidating Rubberized Concrete

KARAHAN O., Ozbay E., Hossain K. M. A., Lachemi M., ATİŞ C. D.

ACI MATERIALS JOURNAL , cilt.109, sa.4, ss.413-420, 2012 (SCI-Expanded)

Alkali activation of mortars containing different replacement levels of ground granulated blast furnace slag

Bilim C., Atis C. D.

CONSTRUCTION AND BUILDING MATERIALS , cilt.28, sa.1, ss.708-712, 2012 (SCI-Expanded)

Effect of Granulated Blast Furnace Slag and fly ash addition on the strength properties of lightweight mortars containing waste PET aggregates

Akçaözoğlu S., ATİŞ C. D.

CONSTRUCTION AND BUILDING MATERIALS , cilt.25, sa.10, ss.4052-4058, 2011 (SCI-Expanded) Sürdürülebilir Kalkınma

The durability properties of polypropylene fiber reinforced fly ash concrete

KARAHAN O., ATİŞ C. D.

MATERIALS & DESIGN , cilt.32, sa.2, ss.1044-1049, 2011 (SCI-Expanded)

The Effects of Different Types of Fly Ash on the Compressive Strength Properties of Briquettes

Sola O. C., YAYLA M., Sayin B., Atis C. D.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING , 2011 (SCI-Expanded)

An investigation on the use of shredded waste PET bottles as aggregate in lightweight concrete

Akçaözoğlu S., ATİŞ C. D., Akçaözoğlu K.

WASTE MANAGEMENT , cilt.30, sa.2, ss.285-290, 2010 (SCI-Expanded) Sürdürülebilir Kalkınma

The effects of scoria and pumice aggregates on the strengths and unit weights of lightweight concrete

KILIÇ A. M., ATİŞ C. D., Teymen A., KARAHAN O., Arı K.

SCIENTIFIC RESEARCH AND ESSAYS , cilt.4, sa.10, ss.961-965, 2009 (SCI-Expanded)

Statistical analysis for strength properties of polypropylene-fibre-reinforced fly ash concrete

KARAHAN O., Tanyildizi H., ATİŞ C. D.

MAGAZINE OF CONCRETE RESEARCH , cilt.61, sa.7, ss.557-566, 2009 (SCI-Expanded)

Relation between Strength Properties (Flexural and Compressive) and Abrasion Resistance of Fiber (Steel and Polypropylene)-Reinforced Fly Ash Concrete

ATİŞ C. D., KARAHAN O., Arı K., Sola O. C., Bilim C.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING , cilt.21, sa.8, ss.402-408, 2009 (SCI-Expanded)

Predicting the compressive strength of ground granulated blast furnace slag concrete using artificial neural network

Bilim C., ATİŞ C. D., Tanyildizi H., KARAHAN O.

ADVANCES IN ENGINEERING SOFTWARE , cilt.40, sa.5, ss.334-340, 2009 (SCI-Expanded)

Properties of steel fiber reinforced fly ash concrete

ATİŞ C. D., KARAHAN O.

CONSTRUCTION AND BUILDING MATERIALS , cilt.23, sa.1, ss.392-399, 2009 (SCI-Expanded)

Comparison of artificial neural network and fuzzy logic models for prediction of long-term compressive strength of silica fume concrete

Oezcan F., ATİŞ C. D., KARAHAN O., Uncuoglu E., Tanyildizi H.

Advances in Engineering Software , cilt.40, sa.9, ss.856-863, 2009 (SCI-Expanded)

Influence of activator on the strength and drying shrinkage of alkali-activated slag mortar

ATİŞ C. D., Bilim C., Celik O., KARAHAN O.

CONSTRUCTION AND BUILDING MATERIALS , cilt.23, sa.1, ss.548-555, 2009 (SCI-Expanded)

An artificial neural network approach for prediction of long-term strength properties of steel fiber reinforced concrete containing fly ash

KARAHAN O., Tanyildizi H., ATİŞ C. D.

JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A , cilt.9, sa.11, ss.1514-1523, 2008 (SCI-Expanded)

Compactibility of hot bituminous mixtures made with crumb rubber-modified binders

Celik O. N., Atis C. D.

CONSTRUCTION AND BUILDING MATERIALS , cilt.22, sa.6, ss.1143-1147, 2008 (SCI-Expanded)

The influence of aggregate type on the strength and abrasion resistance of high strength concrete

KILIÇ A. M., Atis C. D., Teymen A., KARAHAN O., Özcan F., Bilim C., et al.

CEMENT & CONCRETE COMPOSITES , cilt.30, sa.4, ss.290-296, 2008 (SCI-Expanded)

Wet and dry cured compressive strength of concrete containing ground granulated blast-furnace slag

Atis C. D., BİLİM C.

BUILDING AND ENVIRONMENT , cilt.42, sa.8, ss.3060-3065, 2007 (SCI-Expanded)

Strength prediction of silica fume concrete by accelerated warm-water curing method

Atis C. D.

INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES , cilt.14, sa.3, ss.266-270, 2007 (SCI-Expanded)

Effects of steel fibers and mineral filler on the water-tightness of concrete pipes

Haktanir T., Ari K., Altun F., Atis C. D., Karahan O.

CEMENT & CONCRETE COMPOSITES , cilt.28, sa.9, ss.811-816, 2006 (SCI-Expanded)

Influence of dry and wet curing conditions on compressive strength of silica fume concrete

ATIS C. D., OZCAN F., KILIC A., Karahan O., BILIM C., SEVERCAN M.

BUILDING AND ENVIRONMENT , cilt.40, sa.12, ss.1678-1683, 2005 (SCI-Expanded)

Strength properties of high-volume fly ash roller compacted and workable concrete, and influence of curing condition

Atis C. D.

CEMENT AND CONCRETE RESEARCH , cilt.35, sa.6, ss.1112-1121, 2005 (SCI-Expanded) Sürdürülebilir Kalkınma

Strength properties of roller compacted concrete containing a non-standard high calcium fly ash

ATIS C. D., SEVIM U., OZCAN F., BILIM C., Karahan O., TANRIKULU A., et al.

MATERIALS LETTERS , cilt.58, sa.9, ss.1446-1450, 2004 (SCI-Expanded)

Carbonation-porosity-strength model for fly ash concrete

Atis C. D.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING , cilt.16, sa.1, ss.91-94, 2004 (SCI-Expanded)

Strength and shrinkage properties of mortar containing a nonstandard high-calcium fly ash

Atis C. D., KİLİC A., SEVIM U.

CEMENT AND CONCRETE RESEARCH , cilt.34, sa.1, ss.99-102, 2004 (SCI-Expanded)

Experimental and numerical studies of metal powders pressed by uniaxial floating die: Case copper and bronze

EKSI A., LAMAN M., Atis C. D., YILDIZ A., KURT A.

KOVOVE MATERIALY-METALLIC MATERIALS , cilt.42, sa.5, ss.339-352, 2004 (SCI-Expanded)

High-strength lightweight concrete made with scoria aggregate containing mineral admixtures

Kilic A., Atis C. D., YASAR E., OZCAN F.

CEMENT AND CONCRETE RESEARCH , cilt.33, sa.10, ss.1595-1599, 2003 (SCI-Expanded)

Discussion of "Correlations between mechanical properties of high-strength concrete" by M. A. Rashid, M. A. Mansur, and P. Paramasivam

Atis C. D., Tanrikulu A.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING , cilt.15, sa.5, ss.511-512, 2003 (SCI-Expanded)

Abrasion-porosity-strength model for fly ash concrete

Atis C. D.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING , cilt.15, sa.4, ss.408-410, 2003 (SCI-Expanded) Sürdürülebilir Kalkınma

Accelerated carbonation and testing of concrete made with fly ash

Atis C. D.

CONSTRUCTION AND BUILDING MATERIALS , cilt.17, sa.3, ss.147-152, 2003 (SCI-Expanded)

Strength properties of lightweight concrete made with basaltic pumice and fly ash

YASAR E., Atis C. D., KİLİC A., GULSEN H.

MATERIALS LETTERS , cilt.57, sa.15, ss.2267-2270, 2003 (SCI-Expanded)

High-volume fly ash concrete with high strength and low drying shrinkage

Atis C. D.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING , cilt.15, sa.2, ss.153-156, 2003 (SCI-Expanded)

Nondestructive testing of mortar specimens using the microwave free-space method

KHARKOVSKY S., Atis C. D.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING , cilt.15, sa.2, ss.200-204, 2003 (SCI-Expanded)

Effect of bar shape on the pull-out capacity of fully-grouted rockbolts

KİLİC A., YASAR E., Atis C. D.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY , cilt.18, sa.1, ss.1-6, 2003 (SCI-Expanded)

A discussion of the paper "Very-high-performance concrete with ultrafine powders" by Guangcheng Long, Xinyou Wang and Youjun Xie

ATİŞ C. D.

CEMENT AND CONCRETE RESEARCH , cilt.33, sa.1, ss.165-166, 2003 (SCI-Expanded)

Measurement and monitoring of microwave reflection and transmission properties of cement-based specimens

KHARKOVSKY S., AKAY M., HASAR U., Atis C. D.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT , cilt.51, sa.6, ss.1210-1218, 2002 (SCI-Expanded)

The use of a non-standard high calcium fly ash in concrete and its response to accelerated curing

Atis C. D., BİLİM C., OZCAN F., AKCAOZOGLU K., SEVIM U.

MATERIALES DE CONSTRUCCION , cilt.52, sa.267, ss.5-17, 2002 (SCI-Expanded)

High volume fly ash abrasion resistant concrete

Atis C. D.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING , cilt.14, sa.3, ss.274-277, 2002 (SCI-Expanded)

Relation between abrasion resistance and flexural strength of high volume fly ash concrete

Atis C. D., CELIK O.

MATERIALS AND STRUCTURES , cilt.35, sa.248, ss.257-260, 2002 (SCI-Expanded)

Heat evolution of high-volume fly ash concrete

Atis C. D.

CEMENT AND CONCRETE RESEARCH , cilt.32, sa.5, ss.751-756, 2002 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

A novel strategy to avoid local optimum: Army-inspired genetic algorithm (AIGA)

KILINÇ M., ATILGAN E., ATİŞ C. D.

Turkish Journal of Engineering , cilt.8, sa.3, ss.436-446, 2024 (Scopus)

Rough-AHP and MOORA-based Taguchi Optimization for Mixture Proportion of Building Concrete

Himmetoğlu S., Kızılkaya Aydoğan E., Özcan F., Karahan O., Atiş C. D.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.26, sa.4, ss.1307-1317, 2023 (ESCI)

Rough-AHP and MOORA-based Taguchi Optimization for Mixture Proportion of Building Concrete

Himmetoğlu S., Kızılkaya Aydoğan E., Ozcan F., Karahan O., Atiş C. D.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.26, ss.1307-1317, 2023 (ESCI)

Geri Dönüştürülmüş Atık EPSnin Yüksek Dayanımlı Hafif Şap Üretiminde Kullanımının Araştırılması

ATABEY İ. İ., Almaz Özcan Z., İLKENTAPAR S., DURAK U., KARAHAN O., ATİŞ C. D.

Düzce Üniversitesi Bilim ve Teknoloji Dergisi , cilt.11, ss.288-301, 2023 (Hakemli Dergi)

Alkali ile Aktive Edilmiş Cüruf ve Uçucu Kül Harçlarına Yüksek Sıcaklık Sonrası Hava Kürünün Etkisi

Sertbakan R. G., ATABEY İ. İ., DURAK U., İLKENTAPAR S., KARAHAN O., ATİŞ C. D.

Düzce Üniversitesi Bilim ve Teknoloji Dergisi , cilt.10, ss.114-126, 2022 (Hakemli Dergi)

Comparison of Lightweight Screed Containing EPS and Normal Screed Applications

Kılıç F. M., YORULMAZ H., Özuzun S., DURAK U., İLKENTAPAR S., KARAHAN O., et al.

Environmental Research & Technology , cilt.5, sa.4, ss.289-295, 2022 (Scopus)

Flexural Tensile Strength Measurement and Determination for Kerbstones with Unsymmetrical Section

ATİŞ C. D., ABDILAHI A., İLKENTAPAR S., DURAK U., KARAHAN O.

Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.26, sa.1, ss.63-68, 2022 (Hakemli Dergi)

Farklı Hacimlerdeki Uçucu Külün Isı İle Kürlenen Hava Sürükleyici Katkılı Çimento Harçlarına Etkisi

ÖZTÜRK O., Ali O. A., KESKİN Ü. S., ATİŞ C. D.

Erciyes Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.38, sa.2, ss.280-291, 2022 (Hakemli Dergi)

FREEZE-THAW RESISTANCE OF BLAST FURNACE SLAG GEOPOLYMER MORTARS

BİNGÖL Ş., BİLİM C., ATİŞ C. D., DURAK U.

Turkish Journal of Engineering , cilt.6, sa.1, ss.63-66, 2022 (Scopus) Sürdürülebilir Kalkınma

Freeze-thaw resistance of blast furnace slag alkali activated mortars

BİNGÖL Ş., BİLİM C., ATİŞ C. D., DURAK U.

Turkish Journal of Engineering , cilt.6, sa.1, ss.63-66, 2022 (Scopus)

EFFECTS OF DRY PARTICLE COATING WITH NANO- AND MICROPARTICLES ON EARLY COMPRESSIVE STRENGTH OF PORTLAND CEMENT PASTES

Yorulmaz H., Özuzun S., Uzal B., İlkentapar S., Durak U., Karahan O., et al.

Challenge Journal of Concrete Research Letters , cilt.12, sa.4, ss.125-130, 2021 (Scopus)

The Effect of Microwave Curing on the Strength Development of Class-F Fly Ash-Based Geopolymer Mortar

Khaleel F., Atiş C. D., Durak U., İlkentapar S., Karahan O.

Erciyes Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.37, sa.1, ss.118-129, 2021 (Hakemli Dergi) Sürdürülebilir Kalkınma

Strength Development of Heat Cured and Ambient Cured Sodium Hydroxide Activated Fly Ash Based Geopolymer

Atiş C. D., Ali Ali O. A., Durak U., İlkentapar S., Karahan O.

Dicle Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.9, sa.2, ss.79-88, 2020 (Hakemli Dergi) Sürdürülebilir Kalkınma

Carbonation resistance of slag mortars activated by different alkali activators

BİLİM C., ATİŞ C. D.

Turkish Journal of Engineering , cilt.1, ss.1-4, 2017 (Hakemli Dergi)

Sodyum Sülfat ile Aktifleştirilen Uçucu Kül Katkılı Harçların Özellikleri

ATİŞ C. D., KARAHAN O., BİLİM C., ÖZCAN F., SEVİM U. K.

Niğde Üniversitesi Mühendislik Bilimleri Dergisi , cilt.5, sa.2, 2016 (Hakemli Dergi)

Comparison of Unit Price Method and Unit Area Cost Method for Construction Cost Estimation

BAYRAM S., Ocal M. E., Laptali Oral E., ATİŞ C. D.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.19, sa.2, ss.175-183, 2016 (ESCI)

The Abrasion and Strength Properties of Mortars Containing Ground Granulated Blast Furnace Slag

Bilim C., ATİŞ C. D.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.14, sa.2, ss.101-107, 2011 (ESCI)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Farklı Tür Bor Minerallerinin Geopolimer Sistemlerde Aktivatör Olarak Kullanılabilirliğinin Araştırılması

Örklemez E., İlkentapar S., Durak U., Uzal B., Karahan O., Atiş C. D.

BORON2022 Uluslararası Bor Sempozyumu, İstanbul, Türkiye, 5 - 07 Eylül 2022, ss.138-140

ÇİNKO-KURŞUN ÜRETİM TESİSİ ATIKLARININ BETON PARKE TAŞLARINDA KULLANILMASI

Canpolat H., Gökşen Y., İlkentapar S., Durak U., Karahan O., Atiş C. D.

INTERNATIONAL CONGRESS ON ART AND DESIGN RESEARCH AND EXHIBITION, Niğde, Türkiye, 21 - 22 Haziran 2021, ss.1-10 Sürdürülebilir Kalkınma

EFFECTS OF DRY PARTICLE COATING WITH NANO-AND MICROPARTICLES ON EARLY COMPRESSIVE STRENGTH OF PORTLAND CEMENT PASTES

Yorulmaz H., Özuzun S., Uzal B., İlkentapar S., Durak U., Karahan O., et al.

INTERNATIONAL CONGRESS ON ART AND DESIGN RESEARCH AND EXHIBITION, Niğde, Türkiye, 21 - 22 Haziran 2021, ss.1-9

Farklı Oranlarda Diatomit İkamesinin 75 °C’de Isıl Kür Uygulanan F Sınıfı Uçucu Kül Tabanlı Geopolimer Harçlara Etkilerinin İncelenmesi

Örklemez E., İlkentapar S., Durak U., Karahan O., Atiş C. D.

III. INTERNATIONAL TURKIC WORLD CONGRESS ON SCIENCE AND ENGINEERING (TURK-COSE 2021), Niğde, Türkiye, 14 - 15 Haziran 2021, ss.1 Sürdürülebilir Kalkınma

Alkali ile aktive edilen farklı oranlarda yüksek fırın cürufu ve uçucu kül içeren harçların dayanım özellikleri

Almaz Özcan Z., Karahan O., İlkentapar S., Durak U., Naji Al-Azzawi Z. H., Atiş C. D.

2nd International Eurasian Conference on Science, Engineering and Technology (EurasianSciEnTech 2020), Gaziantep, Türkiye, 7 - 09 Ekim 2020, ss.164 Sürdürülebilir Kalkınma

Effect of Extra Air Curing Time on Compressive Strength of Fly Ash Geopolymers Containing Metakaolin

Hataf Naji Alazzawi Z., Karahan O., Atabey İ. İ., Durak U., İlkentapar S., Atiş C. D.

Uluslararası 10. Beton Kongresi, Bursa, Türkiye, 2 - 04 Mayıs 2019, ss.36-41 Sürdürülebilir Kalkınma

Corrosion resistance of fly ash-based geopolymers

ATABEY İ. İ., KARAHAN O., BİLİM C., ATİŞ C. D.

3Nd International Conference on Material Science and Technology IMSTEC’xx18, Nevşehir, Türkiye, 17 - 19 Eylül 2018, ss.334-338

The investigation of mechanical effects of nano sio2 particles for different sodium ion concentartions on fly ash based geopolmer mortar

DURAK U., KARAHAN O., UZAL B., İLKENTAPAR S., ATİŞ C. D.

13th Internatioanl Congress on Advances in Civil Engineering, 12 - 14 Eylül 2018

The Investigation of Mechanical Effects of Nano SiO2 Particles for Different Sodium Ion Concentrations on Fly Ash BasedGeopolymer Mortar

Durak U., Karahan O., Uzal B., İlkentapar S., Atiş C. D.

13TH INTERNATIONAL CONGRESS ON ADVANCES IN CIVIL ENGINEERING (ACE 2018), İzmir, Türkiye, 12 - 14 Eylül 2018, cilt.0, sa.0 Sürdürülebilir Kalkınma

Strength properties of fly ash and blast furnace slag-based geopolymer mortar

Almaz Özcan Z., Karahan O., İlkentapar S., Durak U., Atiş C. D.

1. Internatioanl Techonolical Sciences and Design Symposium, Giresun, Türkiye, 27 - 29 Haziran 2018, sa.0, ss.1645-1653 Sürdürülebilir Kalkınma

Effect of High Dosage Nanoparticles Addition on the Compressive and Flexural Strength on Cement Systems Containing a High Volume of Volcanic Tuff

İlkentapar S., Uzal B., Karahan O., Korkanç M., Atiş C. D., Durak U.

3. International Conference on Civil and Environmental Engineering, İzmir, Türkiye, 24 - 27 Nisan 2018, cilt.1, ss.137 Sürdürülebilir Kalkınma

Investigation of Mechanical Effect of Addition High-Amount Nano-SiO2 and Nano-CaCO3 to the Cement Systems Containing High Volume Natural Zeolite and Pumice

İlkentapar S., Uzal B., Karahan O., Korkanç M., Atiş C. D., Durak U.

3. International Conference on Civil and Environmental Engineering, İzmir, Türkiye, 24 - 27 Nisan 2018, cilt.1, ss.138 Sürdürülebilir Kalkınma

Yüksek fırın curuflu geopolimer harçlara sıcak kür uygulaması

BİNGÖL Ş., BİLİM C., ATİŞ C. D., İLKENTAPAR S., DURAK U., KARAHAN O.

EUROPEAN CONFERENCE ON SCIENCE, ART CULTURE, Antalya, Türkiye, 19 - 22 Nisan 2018, ss.28

Yüksek Fırın Cüruflu Geopolimer Harçların Dayanım Özellikleri

Bingöl Ş., Bilim C., Atiş C. D., İlkentapar S., Durak U., Karahan O.

EUROPEAN CONFERENCE ON SCIENCE, ART CULTURE, Antalya, Türkiye, 19 - 22 Nisan 2018, ss.22 Sürdürülebilir Kalkınma

Yüksek Fırın Cüruflu Geopolimer Harçlara Sıcak Kür Uygulanması

BİNGÖL Ş., BİLİM C., ATİŞ C. D., DURAK U., İLKENTAPAR S., KARAHAN O.

EUROPEAN CONFERENCE ON SCIENCE, ART CULTURE, 19 - 22 Nisan 2018

The Investigation of Mechanical Effects of Nano Al2O3 Particles For Fly Ash Based Geopolymer Mortar

Durak U., Karahan O., Uzal B., İlkentapar S., Atiş C. D.

Ist International Symposium on Innovative Approaches in Scientific Studies, Antalya, Türkiye, 11 - 13 Nisan 2018, cilt.2, ss.10 Sürdürülebilir Kalkınma

Strength Development of Fly Ash-Based Sodium Meta-Silicate and Heat Activated Geopolymer Mortar

Atiş C. D., Ali O. A., Durak U., İlkentapar S., Karahan O.

I. Uluslararası Bilimsel Çalışmalarda Yenilikçi Yaklaşımlar Sempozyumu, Antalya, Türkiye, 11 - 13 Nisan 2018, cilt.2, ss.11-12 Sürdürülebilir Kalkınma

Nano SiO2 ve nano CaCO3’ın geopolimer harçların dayanım özelliklerine etkisi

Durak U., Karahan O., Uzal B., İlkentapar S., Atiş C. D.

2nd INTERNATIONAL MEDITERRANEAN SCIENCE AND ENGINEERING CONGRESS (IMSEC 2017), Adana, Türkiye, 25 - 27 Ekim 2017, cilt.0, sa.0, ss.1679 Sürdürülebilir Kalkınma

Nano Sio2 ve Nano CaCo3’xxin Geopolimer Harçların Dayanım Özelliklerine Etkisi

DURAK U., KARAHAN O., UZAL B., İLKENTAPAR S., ATİŞ C. D.

IMSEC 2017 2nd International Mediterranen Science and Engineering Congress, Adana, Türkiye, 25 - 27 Ekim 2017, ss.8

Alkali Aktive Edilmiş Yüksek Fırın Cüruflu Harçların Dayanım Özellikleri

ATİŞ C. D., BİLİM C., BİNGÖL Ş., KARAHAN O.

Uluslararası Yapılarda Kimyasal Katkılar 5. Sempozyumu ve Sergisi, Ankara, Türkiye, 19 - 20 Ekim 2017, ss.377-390

NaOH ile Aktifleştirilen Sugözü Uçucu Küllü Geopolimerlerin Mekanik Özellikleri

ATABEY İ. İ., KARAHAN O., BİLİM C., ATİŞ C. D.

Uluslararası Yapılarda Kimyasal Katkılar 5.Sempozyumu ve Sergisi, Ankara, Türkiye, 19 - 20 Ekim 2017, ss.335-346

Improve Super Thermal Insulation of Light Concrete Blocks Using Aerogel and Enhanced By Nano Silica

El Zaidi I., DEMİREL B., ATİŞ C. D.

The International Conference on Material Science and Technology in Cappadocia(IMSTEC 2017), 11 - 13 Ekim 2017, ss.650

Comparison and study of the effect of different storage methods on the thermal insulation and mechanical properties of light blocks with hydrophobic silica aerogel and fly ash

El Zaidi I., DEMİREL B., ATİŞ C. D.

The International Conference on Material Science and Technology in Cappadocia(IMSTEC 2017, 11 - 13 Ekim 2017, ss.646

NaOH ile Aktifleştirilen Sugözü Uçucu Külü Geopolimerlerin Mekanik Özellikleri

ATABEY İ. İ., KARAHAN O., BİLİM C., ATİŞ C. D.

Uluslararası Yapılarda Kimyasal Katkılar 5. Sempozyumu ve Sergisi, 19 Ekim - 20 Eylül 2017, ss.335-346

Farklı MS (Sio2/Na2O) Oranlarına Sahip Na2SiO3 ile Üretilen Geopolimer Harçlarda Dayanım Özelliklerinin Araştırılması

ATABEY İ. İ., KARAHAN O., BİLİM C., ATİŞ C. D.

Uluslararası Mühendislik Araştırmaları Sempozyumu UMAS 2017, Düzce, Türkiye, 11 - 13 Eylül 2017, ss.129

FARKLI MS (SiO2/Na2O ORANLARINA SAHİP Na2SiO3 İLEÜRETİLEN GEOPOLİMER HARÇLARDA DAYANIM ÖZELLİKLERİNİNARAŞTIRILMASI

Atabey İ. İ., KARAHAN O., BİLİM C., ATİŞ C. D.

Uluslararası Mühendislik Araştırmaları Sempozyumu (UMAS’2017), Düzce, Türkiye, 11 - 13 Eylül 2017, ss.128

Influence of Incubation Period on Strength Development of NaOH and Heat Cured Fly Ash Based Geopolymer Mortar

Durak U., Ilkentapar S., Atabey İ. İ., Karahan O., Atiş C. D.

2nd International Conference on Civil and Environmental Engineering (ICOCEE - Cappadocia), Nevşehir, Türkiye, 8 - 10 Mayıs 2017, ss.1021 Sürdürülebilir Kalkınma

Effect of Nanoparticle Addition on the Pore Size Distribution and Compressive Strength of High-Volume Natural Pozzolan Cementitious Systems

ILKENTAPAR S., UZAL B., KARAHAN O., Korkanç M., ATİŞ C. D.

International Conference on Civil and Environmental Engineering, Nevşehir, Türkiye, 8 - 10 Mayıs 2017, ss.1269

PYHSICAL AND MECHANICAL PROPERTIES OF LIGTHWEIGHT CONCRETE SCREED CONTAINING EPS

KARAHAN O., TEKİN Y., ATİŞ C. D., İLKENTAPAR S., Uğur M.

2nd INTERNATIONAL SUSTAINABLE BUILDINGS SYMPOSIUM, 28 - 30 Mayıs 2015

EPS Hafif Şap Betonunun fiziksel ve Mekanik Özellikleri

Karahan O., Tekin Y., Atiş C. D., İlkentapar S., Uğur M.

2. ULUSLARARASI SÜRDÜRÜLEBİLİR YAPILAR SEMPOZYUMU, Ankara, Türkiye, 28 - 30 Mayıs 2015, ss.229-232

EPS HAFİF ŞAP BETONUNUNFİZİKSEL VE MEKANİK ÖZELLİKLERİ

KARAHAN O., TEKİN Y., İLKENTAPAR S., ATİŞ C. D., UĞUR M.

2nd INTERNATIONAL SUSTAINABLE BUILDINGS SYMPOSIUM, 28 - 30 Mayıs 2015

Study on Flow and Compressive Strength Properties of Mortars Using Waste Slag

KARAHAN O., ATİŞ C. D., İLKENTAPAR S., ALMAZ ÖZCAN Z.

International Conference on Civil and Environmental Engineering, Nevşehir, Türkiye, 20 - 23 Mayıs 2015, ss.348

Alkali ile Aktifleştirilen Uçucu Kül Geopolimer Harcın Mekanik Özellikleri Üzerine Isıl Kür Süresinin Etkisi

ATİŞ C. D., İLKENTAPAR S., Görür E. B., KARAHAN O.

9. Ulusal Beton Kongresi, Antalya, Türkiye, 16 - 18 Nisan 2015, cilt.1, ss.1-9

Türkiye’de 4734 Sayılı Kamu İhale Kanunu’na Göre Gerçekleştirilen Kamu İnşaat Projelerinin Maliyet ve Süre Açısından Değerlendirilmesi

BAYRAM S., Öcal M. E., Laptalı Oral E., Atiş C. D.

3. Proje ve Yapım Yönetimi Kongresi, Antalya, Türkiye, 6 - 08 Kasım 2014, ss.25

The effect of industrial oil on the properties of fresh and hardened concrete mortars.

ATİŞ C. D., LUGA E., ALMAZ ÖZCAN Z., İLKENTAPAR S.

2 nd International Balkans Conference on Challenges of Civil Engineering, BCCCE, 23-25 May 2013, EPOKA University, Tirana, ALBANIA., Tiran, Arnavutluk, 23 - 25 Mayıs 2013, ss.78-81