Yayınlar & Eserler

Makaleler 29
Tümü (29)
SCI-E, SSCI, AHCI (26)
SCI-E, SSCI, AHCI, ESCI (26)
Scopus (25)
TRDizin (2)
Diğer Yayınlar (2)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 55

1. Genetic Algorithm Based PID Parameter Optimization for Longitudinal Dynamics of a Fixed Wing Mini UAV

1st Workshop IFToMM for Sustainable Development Goals, I4SDG 2021, Virtual, Online, 25 - 26 Kasım 2021, cilt.108 MMS, ss.325-334, (Tam Metin Bildiri) Sürdürülebilir Kalkınma identifier identifier

2. Thermal stresses analysis in cylinder head of a spark ignition engine fueled with ethanol-gasolineusing artificial neural networks

8th International Conference on Advanced Technologies, Saraybosna, Bosna-Hersek, 26 - 30 Ağustos 2019, ss.39-45, (Tam Metin Bildiri)

4. Fruit Mass Estimator Based on Physical Attributes by Feed Forward Neural Network

INTERNATIONAL CONGRESS ON ENGINEERING AND LIFE SCIENCE, Kastamonu, Türkiye, 26 Nisan - 29 Aralık 2018, cilt.1, ss.508, (Özet Bildiri)

5. LATERAL AND LONGITUDINAL DYNAMICS CONTROL OF A FIXED WING UAV BY USING PID CONTROLLER

4th International Conference on Engineering and Natural Sciences (ICENS), Kyyiv, Ukrayna, 2 - 06 Mayıs 2018, ss.994-1002, (Tam Metin Bildiri)

6. VERİ MADENCİLİĞİ İLE ELMALARIN RENK ÖZELLİKLERİNİ TANIMLAMA

II. INTERNATIONALSCIENTIFIC AND VOCATIONALSTUDIES CONGRESS (BILMES 2018), 5 - 08 Temmuz 2018, (Özet Bildiri)

7. MEYVELERDE FİZİKSEL ÖZELLİKLERİN TAHMİNİ

II. International Scientific and Vocational Studies Congress, Nevşehir, Türkiye, 5 - 08 Temmuz 2018, ss.415, (Özet Bildiri)

8. PREDICTION OF DAMAGE PARAMETERS OF 3PLS COMPANIES USING ARTIFICIAL NEURAL NETWORKS

II. International Scientific and Vocational Studies Congress, Nevşehir, Türkiye, 5 - 08 Temmuz 2018, cilt.1, ss.784-788, (Tam Metin Bildiri)

9. PREDICTON THE KERNEL WEIGHT OF THE ALMOND NUT VIA FINDLAWS ENGINE

IV INTERNATIONAL CONFERENCE ON ENGINEERING AND NATURAL SCIENCES (ICENS), 2 - 06 Mayıs 2018, (Özet Bildiri)

10. Design of Fuzzy Logic Controller for Dynamic State Variables of a Fixed Wing UAV

4th International Conference on Engineering and Natural Sciences, Kiev, Ukrayna, 2 - 06 Mayıs 2018, ss.1, (Özet Bildiri)

11. Lateral and Longitudinal Dynamics Control of a Fixed Wing UAV by using PID Controller

4TH INTERNATIONAL CONFERENCE ON ENGINEERING AND NATURAL SCIENCE, Kiev, Ukrayna, 2 - 06 Mayıs 2018, cilt.1, ss.994-1002, (Tam Metin Bildiri)

12. Design of Fuzzy Logic Controller for Dynamic State Variables of a Fixed Wing UAV

4th. International Conference on Engineering and Natural Sciences (ICENS), Kyyiv, Ukrayna, 2 - 06 Mayıs 2018, ss.418, (Özet Bildiri)

13. Artificial Neural Network Structures to Forecast Physical Attributes of Different Agricultural Products

INTERNATIONAL CONGRESS ON ENGINEERING AND LIFE SCIENCE, Kastamonu, Türkiye, 26 - 29 Nisan 2018, cilt.1, ss.382, (Özet Bildiri)

14. Control of front-wheel steering angle of unmanned agricultural vehicles with ANN-Based control system

International Conference on Technology, Engineering and Science, Antalya, Türkiye, 26 Ekim - 29 Kasım 2017, ss.124, (Özet Bildiri)

15. ESTIMATION OF PUMPKIN SEEDS PARAMETERS USING ARTIFICIAL NEURAL NETWORK

International Conference on Advance in Science:ICAS2017, İstanbul, Türkiye, 13 - 15 Eylül 2017, cilt.1, ss.141-145, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

16. Neural network based PID controller design for human elbow therapy system

International Conference on Advance in Science:ICAS2017, İstanbul, Türkiye, 13 - 15 Eylül 2017, cilt.1, ss.147-153, (Tam Metin Bildiri)

17. DESIGN OF NEURAL NETWORK ESTIMATOR FOR THE PHYSICAL PROPERTIES OF ALMOND NUTS

INTERNATIONAL CONFERENCE ON ADVANCES IN SCIENCE: ICAS2017, İstanbul, Türkiye, 13 - 15 Eylül 2017, ss.146, (Özet Bildiri)

18. Potential Use of General Regression Neural Network to Estimate Colour Parameters of Apples

International Conference on Agriculture, Forest, Food,Sciences and Technologies, Nevşehir, Türkiye, 15 - 17 Mayıs 2017, ss.272, (Özet Bildiri)

19. Radial Basis Neural Networks (RBNN) for the Weight Prediction of Walnut (Juglans regia L.) Cultivars

International Conference on Agriculture, Forest, Food,Sciences and Technologies, Nevşehir, Türkiye, 15 - 17 Mayıs 2017, ss.230, (Özet Bildiri)

20. Weight Prediction of Maras-18 Walnut (Juglans regia L.) Cultivar Using Modular and Radial Basis Neural Networks

International Conference on Agriculture, Forest, Food,Sciences and Technologies, Nevşehir, Türkiye, 15 - 17 Mayıs 2017, ss.283, (Özet Bildiri)

21. Adaptive Neuro-Fuzzy Inference System (ANFIS) Approach for Prediction of the Colour Features of Apple Fruits

International Conference on Agriculture, Forest, Food,Sciences and Technologies, Nevşehir, Türkiye, 15 - 17 Mayıs 2017, ss.180, (Özet Bildiri)

22. TORQUE CONTROL OF HUMAN WRIST THERAPY

INTERNATIONAL CONFERENCE ON ADVANCES IN SCIENCE AND ARTS ISTANBUL 2017, İstanbul, Türkiye, 29 - 31 Mart 2017, ss.139-145, (Tam Metin Bildiri)

23. ANGULAR DISPLACEMENT CONTROLLER DESIGN FOR HUMAN ELBOW PASSIVE THERAPEUTIC EXERCISES

INTERNATIONAL CONFERENCE ON ADVANCES IN SCIENCE AND ARTS ISTANBUL 2017, İstanbul, Türkiye, 29 - 31 Mart 2017, ss.132-138, (Tam Metin Bildiri)

24. PID Controller Design for Human Elbow Therapy

International Conference on Advanced Technology & Sciences (ICAT'16), Konya, Türkiye, 1 - 03 Eylül 2016, ss.1011-1014, (Tam Metin Bildiri)

25. Gain parameter adjusment methods comparison of controller for autonomous rehabilitation device

International conference on advanced technology&Science, Konya, Türkiye, 1 - 03 Eylül 2016, cilt.1, ss.1015-1019, (Tam Metin Bildiri)

26. Gain Parameter Adjustment Methods Comparison of Controller for Autonomous Rehabilitation Device

International Conference on Advanced Technology & Sciences (ICAT'16), Konya, Türkiye, 1 - 03 Eylül 2016, ss.1015-1019, (Tam Metin Bildiri)

27. Desing of Neural Network Based Fuzzy Inference System for Speed Control of Heavy Duty Vehicles with Electronic Throttle Control System

15th International Conference on Circuits, Systems, Electronics, Control & Signal Processing, İstanbul, Türkiye, 15 Nisan - 17 Haziran 2016, cilt.1, ss.128-132, (Tam Metin Bildiri)

28. CONTROLLER DESIGN FOR PATIENTS WHO HAS MALFUNCTION AT EXTREMITY

CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2016 – ICAME2016, İstanbul, Türkiye, 11 - 13 Mayıs 2016, ss.313-318, (Tam Metin Bildiri)

29. DESIGN OF ROBUST CONTROL SYSTEM FOR CONTROLLING TRAJECTORY OF AUTONOMOUS TRACTOR

CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2016 – ICAME2016, İstanbul, Türkiye, 11 - 13 Mayıs 2016, ss.326-330, (Tam Metin Bildiri)

30. Design of neural predictor for vibration analysis of drilling machine

2ND INTERNATIONAL CONFERENCE ON ADVANCES INMECHANICAL ENGINEERING, 11 - 13 Mayıs 2016, cilt.1, ss.166-170, (Tam Metin Bildiri)

31. Control of Heavy Duty Vehicles with Electronic Throttle Control System

15th International Conference on Circuits, Systems, Electronics, Control & Signal Processing (CSECS '16), 15 - 17 Nisan 2016

32. Control of Autonomous Underwater Vehicles using Neural Network Based Robust Control System

15th International Conference on CIRCUITS, SYSTEMS, ELECTRONICS, CONTROL &SIGNAL PROCESSING (CSECS '16), İstanbul, Türkiye, 15 - 17 Nisan 2016, ss.157-181, (Tam Metin Bildiri)

33. Design of Neural Network Based Fuzzy Inference System for Speed

15th International Conference on Circuits, Systems, Electronics, Control & Signal Processing (CSECS '16), 15 - 17 Nisan 2016, (Tam Metin Bildiri)

34. Otonom Sualtı Taşıtların Yörünge Kontrolü İçin Yapay Sinir Ağı Kontrol Sistemi Tasarımı

Uluslararası Katılımlı 17. Makina Teorisi Sempozyumu, Türkiye, 14 - 17 Haziran 2015, ss.746-753, (Tam Metin Bildiri)

35. AKTİF DİREKSİYON SİSTEMİNİN KONTROLÜ İÇİN YAPAY SİNİR AĞI ESASLI KONTROL SİSTEMİ TASARIMI

17. ULUSAL MAKİNA TEORİSİ SEMPOZYUMU, İzmir, Türkiye, 14 - 17 Haziran 2015, ss.449-454, (Tam Metin Bildiri)

36. Otonom Sualtı Taşıtların Yörünge Kontrolü için Yapay Sinir Ağı Kontrol Sistemi Tasarımı

Ulusal Makina Teorisi Sempozyumu 2015, İzmir, Türkiye, 14 - 17 Haziran 2015, ss.1-6, (Tam Metin Bildiri)

37. SPEED RATIO CONTROL OF PULLEY BASED V-BELT TYPE CONTINUOUSLY VARIABLE TRANSMISSION (CVT) USING FUZZY LOGIC CONTROLLER

INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2015, İstanbul, Türkiye, 13 - 15 Mayıs 2015, ss.783-790, (Tam Metin Bildiri)

38. Yapay Sinir ağları Kullanarak İnsan Kalça ve Diz Eklemlerinin Titreşim Analizi

Ulusal Makina Teorisi Sempozyumu 2013, Erzurum, Türkiye, 12 - 13 Eylül 2013, ss.254-262, (Tam Metin Bildiri)

39. FAILURE ANALYSIS ON HIP AND KNEE JOINTS OF HUMANS USING PROPOSED FEED FORWARD NEURAL NETWORKS

17th „Building Services, Mechanical and Building Industry Days”, Macaristan, 1 - 04 Ekim 2011, ss.1-17, (Tam Metin Bildiri)

40. Vibration Analysis of Food Industries Mixing Systems for Long life Using Neural Networks

2011 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM2011), Macaristan, 1 - 04 Temmuz 2011, ss.197-202, (Tam Metin Bildiri)

41. Yapay Sinir Ağları Kullanarak Robot Manipülatörlerinde Hata Tespiti

15. Ulusal Makine Teorisi Sempozyumu (UMTS 2011), Niğde, Türkiye, 1 - 04 Haziran 2011, ss.325-333, (Tam Metin Bildiri)

42. Deneysel Karıştırma İstasyonunun Yapay Sinir Ağı Kontrol Sistemi ile Debi Kontrolü

15. Ulusal Makine Teorisi Sempozyumu, Niğde, Türkiye, 1 - 04 Haziran 2011, ss.281-286, (Tam Metin Bildiri)

43. Adaptive Control of Flexible Link Robot Manipulators Using Proposed Neural Network Based Model Reference Adaptive Control System

16th Building Services, Mechanical and Building Industry Days, International Conference, Macaristan, 1 - 04 Ekim 2010, ss.519-534, (Tam Metin Bildiri)

44. Vibration Analysis of an Experimental Robot Manipulator Using Neural Network

15th Building Services, Mechanical and Building Industry Days, Debrecen, Macaristan, 15 - 16 Ekim 2009, ss.175-185, (Tam Metin Bildiri)

45. Vibration analysis of an experimental robot manipulator using neural networks

15th Building Services, Mechanical and Building Industry days, Macaristan, 1 - 04 Ekim 2009, ss.175-185, (Tam Metin Bildiri)

46. Deneysel Yarı Aktif Süspansiyon Sistemi Tasarımı ve Titreşim Analizi

14. Ulusal Makine Teorisi Sempozyumu, Gazimagusa, Kıbrıs (Kktc), 1 - 04 Temmuz 2009, ss.165-171, (Tam Metin Bildiri)

47. Gürbüz Yapay Sinir Ağı Kontrol Sistemi Kullanarak Taşıt Aktif Süspansiyon Sisteminin Titreşim Kontrolü

14. Ulusal Makine Teorisi Sempozyumu, Gazimagusa, Kıbrıs (Kktc), 1 - 04 Temmuz 2009, ss.153-163, (Tam Metin Bildiri)

49. Design of Neural Network Analyser for Vibration Prediction of a Robot Manipulator

14th Building Services, Mechanical and Building Industry Days, International Conference, Macaristan, 1 - 04 Ekim 2008, ss.366-385, (Tam Metin Bildiri)

50. Yapay Sinir Ağları Kullanarak Prototip Aktif Süspansiyon Sisteminin Titreşim Kontrolü

13. Ulusal Makine Teorisi Sempozyumu (UMTS 2007), Cumhuriyet Üniversitesi, Sivas, Türkiye, 1 - 04 Haziran 2007, ss.525-532, (Tam Metin Bildiri)

51. Yapay Sinir Ağları Kullanarak Robot Manipülatörlerinde Gürültü Analizi

UMES'07- Ulusal Teknik Eğitim, Mühendislik ve Eğitim Bilimleri Genç Araştırmacılar Sempozyumu, Kocaeli, Türkiye, 1 - 04 Haziran 2007, cilt.1, ss.422-425, (Tam Metin Bildiri)

52. Uçaklarda İniş-Kalkış Süspansiyon Sisteminin Yapay Sinir Ağı Denetimcisi ile Kontrolü

VI. Havacılık Sempozyumu, Nevşehir, Türkiye, 1 - 04 Mayıs 2006, ss.439-443, (Tam Metin Bildiri)

53. Yapay Sinir Ağları Kullanarak Taşıt Süspansiyon Sistemlerinin Modellenmesi

4th International Advanced Technologies Symposium, Türkiye, 1 - 04 Eylül 2005, ss.1024-1029, (Tam Metin Bildiri)

54. Design of Neural Predictor for Force Analysis of Slider Crank Mechanisms

The First Capppadocia International Mechanical Engineering Symposium, Türkiye, 1 - 04 Temmuz 2004, ss.656-665, (Tam Metin Bildiri)

55. Sinir Ağları Kullanarak Krank-Biyel Mekanizmalarının Kuvvet Analizi

11. Ulusal Makine Teorisi Sempozyumu, UMTS 2003, Gazi Üniversitesi, Ankara, Ankara, Türkiye, 1 - 04 Eylül 2003, ss.643-650, (Tam Metin Bildiri)
Kitaplar 3

1. Design of Artificial Neural Network Predictors in Mechanical Systems Problems

Design of Artificial Neural Network Predictors in Mechanical Systems Problems, Nova Publishers, Editör, Nova Publisher, Newyork, 2011

2. The Noise and Acceleration Analysis of an Experimental Robot Manipulator Using Radial Basis Function Neural Network

New Development of Manufacturing Robotic Systems and Automation,, Zhang D., Gao Z., Editör, Bentham Science Publisher, Bussum, 2011

3. Noise and Acceleration Analysis of an Experimental Robot Manipulator Using Proposed Neural Networks

New Development of Manufacturing Robotic Systems and Automation, Dhan Zhang, Zhen Gao, Editör, Bentham Science Publisher, Kanada, ss.1-36, 2011
Metrikler

Yayın

89

Yayın (WoS)

27

Yayın (Scopus)

26

Atıf (WoS)

421

H-İndeks (WoS)

11

Atıf (Scopus)

396

H-İndeks (Scopus)

11

Atıf (Scholar)

41

H-İndeks (Scholar)

3

Atıf (Sobiad)

4

H-İndeks (Sobiad)

1

Proje

6

Tez Danışmanlığı

2

Açık Erişim

5
BM Sürdürülebilir Kalkınma Amaçları