Assoc. Prof. UMUT ÇALIŞKAN

Publication Network

Articles 39

1. Investigating strain rate effects on damage mechanisms in hybrid laminated composites using acoustic emission

Gülşen A., Kolukısa B., Etçil M., Çalışkan U., Zafar H. M. N., Demirbaş M. D., et al.

APPLIED ACOUSTICS , vol.240, no.5, pp.1-20, 2025 (SCI-Expanded, Scopus)

2. A novel hybrid battery thermal management system using a wavy minichannel and a composite phase change material

Dagdevir T., Lin X., Çalışkan U., Ding Y.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , vol.251, pp.1-20, 2025 (SCI-Expanded, Scopus)

3. Effect of multi-layer graphene on polymer nanocomposites under mechanical loading: a multiscale modeling approach

Çalışkan U., Yiğit İ., Küçüker G.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , vol.48, no.598, pp.1-20, 2025 (SCI-Expanded, Scopus)

4. Numerical Investigation of Repeated Impact Ballistic Performance of High-Hardness ARMOX 600T Steel Against 0.3-Caliber FSP

ÖZKAN B., ÇALIŞKAN U., KÖSEDAĞ E.

Enginoscope , vol.1, no.2, pp.136-147, 2025 (Peer-Reviewed Journal)

5. Investigation of structural behavior of novel combined reentered cylindrical auxetic core sandwich beams under bending

Çalışkan U., Demirbaş M. D., Sevim Ç., Yasan Ö. B.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES , vol.1, no.1, pp.1-20, 2025 (SCI-Expanded, Scopus)

6. Numerical Investigation of the High Strain Rate Behavior of Superelastic NiTi Alloys

ÇALIŞKAN U., TOKER G. P.

Enginoscope , vol.1, no.2, pp.165-177, 2025 (Peer-Reviewed Journal)

7. Modeling the Asymmetric Thermo-Mechanical Behavior and Failure of Gray Cast Irons: An Experimental–Numerical Study with Separate Johnson–Cook Parameters

Özcan B., Çalışkan U., Aydın M., Çavuşoğlu O., Şeker U.

SIMULATION MODELLING PRACTICE AND THEORY , vol.1, no.1, pp.1-20, 2025 (SCI-Expanded, Scopus)

8. Functionally Graded and Geometrically Modified Auxetic Re-Entrant Honeycombs: Experimental and Numerical Analysis

Demirbas M. D., Ekrikaya S., Çalışkan U., Sevim Ç., Apalak M. K.

POLYMERS , vol.17, no.11, pp.1-21, 2025 (SCI-Expanded, Scopus)

9. Damage detection on flexural loading of hybrid laminated composite by acoustic emission

Demirbaş M. D., Çalışkan U., Zafar H. M. N.

COMPOSITE STRUCTURES , vol.1, no.119056, pp.119056, 2025 (SCI-Expanded, Scopus)

10. Karbon-Aramid/Epoksi Reçine Tabakalı Kompozitlerin Düşük Hızlı Darbe ve Darbe Sonrası Davranış Mekanizmaları Üzerine Sayısal ve Deneysel Çalışma

ÇALIŞKAN U., BAŞLI İ., bezen c.

Erciyes Üniversitesi Fen Bilimleri Enstitüsü Dergisi , vol.41, no.1, pp.218-228, 2025 (TRDizin)

11. An Add-On Armor Design Against 7.62 mm × 51 Armor-Piercing Tungsten Carbide Core Ammunition for Armored Vehicles and Examination of the Ballistic Performance of the Armor

Teoman A., Göde E., Tonbul K., Çalışkan U., Öğünç G. İ., Çetin B.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , vol.1, no.1, pp.1-23, 2025 (SCI-Expanded, Scopus)

12. Effects of Consolidation Parameters on Flexural Behavior of Polypropylene/Glass Fiber Thermoplastic Composites

saar a., bezen c., ÇALIŞKAN U., APALAK Z. G.

International Scientific and Vocational Studies Journal , vol.8, 2024 (Peer-Reviewed Journal)

13. Ensemble Feature Selection for Clustering Damage Modes in Carbon Fiber-Reinforced Polymer Sandwich Composites Using Acoustic Emission

Gülşen A., Kolukısa B., Çalışkan U., Güngör B., Güngör V. Ç.

ADVANCED ENGINEERING MATERIALS , vol.26, no.22, 2024 (SCI-Expanded, Scopus) Sustainable Development

14. Design of an add-on ceramic composite armour against 14.5 x 114 mm API/B32 projectile for the armoured vehicles and investigation of the ballistic performance of the armour

Çalışkan U.

MATERIALS RESEARCH EXPRESS , vol.11, no.4, 2024 (SCI-Expanded, Scopus)

15. New approach for modeling randomly distributed CNT reinforced polymer nanocomposite with van der Waals interactions

Çalışkan U., Gulsen H., Apalak M. K.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES , vol.31, no.1, pp.218-229, 2024 (SCI-Expanded, Scopus)

16. Experimental investigation on impact and after-impact compression (AIC) behavior of foam core composite panels

Çalışkan U., Lekesizcan E.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , vol.43, no.3-4, pp.129-148, 2024 (SCI-Expanded, Scopus)

17. Tensile behavior of functionally graded sandwich PLA-ABS produced via fused filament fabrication process

Çalışkan U., Sevim Ç., Demirbas M. D.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES , vol.31, no.1, pp.261-270, 2024 (SCI-Expanded, Scopus)

18. A novel computational multi-scale modeling of randomly-distributed-graphene/epoxy nanocomposites with interfacial interactions

Çalışkan U., Gulsen H.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES , vol.285, no.112553, pp.1-15, 2023 (SCI-Expanded, Scopus)

19. Effect of SiC and graphene nanoparticles on the mechanical properties of carbon fiber-reinforced epoxy composites

Kosedag E., Ekici R., Yildiz N., Caliskan U.

Polymer Composites , vol.44, no.12, pp.8578-8588, 2023 (SCI-Expanded, Scopus)

20. Numerical Modeling of Mechanical Behavior of Functionally Graded Polylactic Acid–Acrylonitrile Benzidine Styrene Produced via Fused Deposition Modeling: Experimental Observations

Sevim Ç., Caliskan U., Demirbas M. D., Ekrikaya S., Apalak M. K.

Materials , vol.16, no.14, 2023 (SCI-Expanded, Scopus)

21. Numerical Study on Free Particle Reinforced Fiber-Metal Composite Sandwiches Under Ballistic Loads

Çalışkan U., Duman N., Terme A. T., Çayır M., Bozkurt M.

International Scientific and Vocational Studies Journal , vol.7, no.1, pp.9-20, 2023 (Peer-Reviewed Journal)

22. Impact-Delamination Detection in Repaired-Composite Laminates Using Numerical and Ultrasonic Method

ÇALIŞKAN U., YILDIZ F., Teke S., ÖZDEMİR A. T.

JOURNAL OF NONDESTRUCTIVE EVALUATION , vol.41, no.2, 2022 (SCI-Expanded, Scopus) Sustainable Development

23. Flexural impact response and damage detection of composite sandwich beam with various PVC foam cores

Çalışkan U., Apalak M. K.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES , vol.29, no.9, pp.1276-1293, 2022 (SCI-Expanded, Scopus)

24. The effect of artificial aging on the impact behavior of SiC nanoparticle-glass fiber-reinforced polymer matrix composites

Kösedağ E., Çalışkan U., Ekici R.

POLYMER COMPOSITES , vol.43, no.2, pp.964-976, 2022 (SCI-Expanded, Scopus)

25. Evaluation of the bending response of compact and thin-walled FG beams with CUF

DEMİRBAŞ M. D., ÇALIŞKAN U., Xu X., Filippi M.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES , vol.28, no.17, pp.1755-1764, 2021 (SCI-Expanded, Scopus)

26. Numerical model for composite patch repair of notched aluminum plates under impact loading

Çalışkan U., Ekici R., Yildiz Bayazit A., Apalak M. K.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS , vol.235, no.5, pp.958-973, 2021 (SCI-Expanded, Scopus)

27. Developing Algorithm for Random Distribution of Nanomaterials

ÇALIŞKAN U.

European Journal of Science and Technology , vol.24, pp.508-514, 2021 (TRDizin)

28. Grafen/Polimer Nanokompozitlerin Çok-Ölçeklekli Modelleri-Arayüzeylerin Moleküler Etkileşimleri

ÇALIŞKAN U., KAHRAMAN S., KOÇYİĞİT T.

International Scientific and Vocational Studies Journal , vol.5, no.2, pp.124-134, 2021 (Peer-Reviewed Journal)

29. Flexural impact Response of Cracked Sandwich Beams Repaired by Composite Patches

ÇALIŞKAN U., EKİCİ R., APALAK M. K.

Uluslararası Muhendislik Arastirma ve Gelistirme Dergisi , vol.13, pp.438-447, 2021 (TRDizin)

30. The response of pin-clamped carbon fibre-reinforced plastics composite sandwich beams with polyvinylchloride foam core under bending impact

Çalışkan U., Apalak M. K.

Journal of Reinforced Plastics and Composites , vol.39, pp.384-405, 2020 (SCI-Expanded, Scopus)

31. A study on low-velocity impact performance of notched GFRP composites repaired by different composite patches: Experiment and modeling

Çalışkan U., Ekici R., Yıldız E., Apalak M. K.

POLYMER COMPOSITES , vol.41, no.4, pp.1323-1340, 2020 (SCI-Expanded, Scopus)

32. Impact penetration and perforation performance of square sandwich panels with EPS foam core

ÇALIŞKAN U., APALAK M. K.

SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES , vol.45, no.1, 2020 (SCI-Expanded, Scopus)

33. Low Velocity Impact Behaviour of Damaged Composite Plates Repaired by Composite Patches

Çalışkan U., Ekici R., Apalak M. K.

Mehmet Akif Ersoy Üniversitesi Uygulamalı Bilimler Dergisi , vol.3, pp.47-64, 2019 (Peer-Reviewed Journal)

34. Low speed impact behaviour of adhesively bonded foam-core sandwich T-joints

ÇALIŞKAN U., APALAK M. K.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , vol.33, no.3, pp.217-242, 2019 (SCI-Expanded, Scopus)

35. Bending impact behaviour of sandwich beams with expanded polystyrene foam core: Analysis

Çalışkan U., Apalak M. K.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS , vol.21, pp.230-259, 2019 (SCI-Expanded, Scopus)

36. Effect of Composite Patch Geometry in Notched Plates Under Low Velocity Impact

Çalışkan U., Ekici R., Apalak M. K.

Uluslararası Muhendislik Arastirma ve Gelistirme Dergisi , vol.9, pp.113-124, 2017 (TRDizin)

37. FEM ANALYSES OF LOW VELOCITY IMPACT BEHAVIOUR OF SANDWICH PANELS WITH EPS FOAM CORE

ÇALIŞKAN U., APALAK M. K.

JOURNAL OF THERMAL ENGINEERING , vol.3, no.6, pp.1544-1552, 2017 (ESCI, Scopus, TRDizin)

38. Low velocity bending impact behavior of foam core sandwich beams: Experimental

Çalışkan U., Apalak M. K.

Composites Part B: Engineering , vol.112, pp.158-175, 2017 (SCI-Expanded, Scopus)

39. Dynamic response of polypropylene honeycomb/polystyrene foam core sandwich composite panels: Experimental and numerical analysis

Çalışkan U., Demirbaş M. D., Erdogan O.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES , vol.30, no.12, pp.2385-2397, 1 (SCI-Expanded, Scopus)

Papers Presented at Peer-Reviewed Scientific Conferences 38

1. EKLEMELİ İMALAT YÖNTEMİYLE ÜRETİLMİŞ Tİ-6AL-4V ALAŞIMININ YÜKSEK ŞEKİL DEĞİŞTİRME HIZI DAVRANIŞININ SHPB TESTLERİ İLE İNCELENMESİ

TOKER G. P., ÇALIŞKAN U.

Hakkımızda İleri Malzemeler ve Eklemeli İmalat Teknolojileri (İMEİT) Konferansı, Sivas, Turkey, 22 - 24 October 2025, (Summary Text)

2. Determination and Validation of Johnson–Cook Parameters for AISI 1040 Steel under Different Temperatures and Strain Rates

ÖZCAN B., ÇALIŞKAN U., AYDIN M., ŞEKER U.

International Defense Industry Symposium and Exhibition, Kayseri, Turkey, 16 - 18 October 2025, (Full Text)

3. Hybrid Dispersion-Assisted Fabrication Route for Graphene/Epoxy Nanocomposites: Effect of Particle Size and Volume Fraction

gülşen h., ÇALIŞKAN U., APALAK M. K.

International Congress on New Trends in Mechanics, Baku, Azerbaijan, 2 - 05 September 2025, (Full Text)

4. A STUDY ON THE DEVELOPMENT OF PRODUCTION METHODS OF CARBON NANOTUBE-REINFORCED POLYMER

gülşen h., ÇALIŞKAN U.

7th International Conference on Advances in Mechanical Engineering, Istanbul, Türkiye, 2024, İstanbul, Turkey, 24 - 26 December 2024, (Summary Text)

5. INVESTIGATION OF ISOTROPIC BEHAVIOR IN MULTISCALE ANALYSIS OF GRAPHENE-REINFORCED NANOCOMPOSITES

gülşen h., ÇALIŞKAN U.

7th International Conference on Advances in Mechanical Engineering, Istanbul, Türkiye, 2024, İstanbul, Turkey, 24 - 26 December 2024, (Full Text)

6. YÜZEY AKTİF MADDE KULLANIMININ GRAFEN/EPOKSİ NANOKOMPOZİTLERİN ÇEKME DAVRANIŞI ÜZERİNE ETKİLERİ

BOZKURT M., duman n., ÇALIŞKAN U., Teoman A.

11. Savunma Teknolojileri Kongresi, Ankara, Turkey, 10 - 12 September 2024, (Full Text)

7. Investigation on three-point bending response of novel sandwich beams with Re-entrant auxetic core for different materials

ÇALIŞKAN U., DEMİRBAŞ M. D., SEVİM Ç., YASAN Ö. B.

9th International Conference on Mechanics of Composites, Porto, Portugal, 24 - 26 June 2024, (Full Text)

8. Damage detection on flexural loading of hybrid laminated composite by acoustic emission

DEMİRBAŞ M. D., ÇALIŞKAN U., Zafar H. M. N.

9th International Conference on Mechanics of Composites, Porto, Portugal, 26 June 2024, (Full Text)

9. EFFECT OF POLYMER COATING ON THE BALLISTIC PERFORMANCE OF GLASS FIBER ARMOR PLATE

ÖZDEMİR Ö., ÇALIŞKAN U.

VIII. International Scientific and Vocational Studies Congress, Turkey, 22 - 24 December 2023, (Full Text)

10. KARBON NANOTÜP TAKVIYELI POLIMER NANOKOMPOZITLERIN ÇOK ÖLÇEKLI MODELLENMESI: RASTGELE DAĞILIM ETKISI

gülşen h., ÇALIŞKAN U.

VI. ULUSAL MÜHENDİSLİKTE BİLİMSEL VE MESLEKİ ÇALIŞMALAR KONGRESİ, Turkey, 22 - 24 December 2023, (Summary Text)

11. COMPRESSION ANALYSIS OF CFRP CORES WITH DIFFERENT TOPOLOGIES

EŞSİZER C., ÇALIŞKAN U.

VIII. International Scientific and Vocational Studies Congress (BILMES 2023, Turkey, 22 - 24 December 2023, (Full Text)

12. Tensile behavior of functionally graded sandwich PLA-ABS produced via fused filament fabrication process

ÇALIŞKAN U., Sevim Ç., DEMİRBAŞ M. D.

International Conference on Advanced Topics in Mechanics of Materials, Structures and Construction, AToMech1 2023, Al-Khobar, Saudi Arabia, 12 - 14 March 2023, vol.31, pp.726-733, (Full Text)

13. New approach for modeling randomly distributed CNT reinforced polymer nanocomposite with van der Waals interactions

ÇALIŞKAN U., Gulsen H., APALAK M. K.

International Conference on Advanced Topics in Mechanics of Materials, Structures and Construction, AToMech1 2023, Al-Khobar, Saudi Arabia, 12 - 14 March 2023, vol.31, pp.55-65, (Full Text)

14. BALLISTIC BEHAVIOR OF POLYMER-COATED ARAMID COMPOSITE SHEET

YARDIM C. Ş., ÇALIŞKAN U., AYDIN M.

VII. International Scientific and Vocational Studies Congress – Science and Engineering, Turkey, 16 December 2022, pp.183-189, (Full Text)

15. INVESTIGATION OF BALLISTIC PERFORMANCE OF SUPER ELASTIC METAL-FIBER LAYER SANDWICH STRUCTURES

KALIN B. S., ÇALIŞKAN U., APALAK Z. G.

VII. International Scientific and Vocational Studies Congress – Science and Engineering, Turkey, 16 December 2022, pp.171-176, (Full Text)

16. INVESTIGATION OF THE RESISTANCE OF ULTRA-HIGH MOLECULAR WEIGHT POLYETHYLENE SHEETS AGAINST HIGH-SPEED PARTICLE

ÖZDEMİR E., ÇALIŞKAN U., AYDIN M.

VII. International Scientific and Vocational Studies Congress – Science and Engineering, Turkey, 16 December 2022, pp.177-182, (Full Text)

17. IMPACT RESISTANCE OF POLYPROPYLENE HONEYCOMN CORE COMPOSITE SANDWICH STRUCTURES

Sarı S. E., Çakmak G., Çalışkan U.

Savunma Sanayi Sempozyumu ve Sergisi, Kayseri, Turkey, 13 - 15 October 2022, pp.1-5, (Full Text)

18. BALLISTIC BEHAVIOR OF ARAMID COMPOSITE SHEET AGAINST SPHERICAL PARTICLE

Çalışkan U., Aydın M., Teoman A.

Savunma Sanayi Sempozyumu ve Sergisi, Kayseri, Turkey, 13 - 15 October 2022, pp.1-5, (Full Text)

19. BALLISTIC BEHAVIOR OF ARAMID COMPOSITE SHEET AGAINST SPHERICAL PARTICLERI

Yardım C. Ş., Çalışkan U., Aydın M.

Savunma Sanayi Sempozyumu ve Sergisi, Kayseri, Turkey, 13 - 15 October 2022, pp.1-5, (Full Text)

20. EKSTRA YÜKSEK SERTLİK ZIRH ÇELİKLERİNİN 0,3 KALİBRE PARÇACIK BENZETİMLİ MERMİ ETKİSİ ALTINDA BALİSTİK PERFORMASLARININ KARŞILAŞTIRMALI SAYISAL İNCELEMESİ

Çalışkan U., Aydın M., Teoman A.

SAVTEK 2022, 10. SAVUNMA TEKNOLOJİLERİ KONGRESİ, Ankara, Turkey, 13 - 15 September 2022, pp.607-619, (Full Text)

21. FONKSİYONEL OLARAK KADEMELENDİRİLMİŞ ABS VE PLA’NIN MEKANİK META MALZEME DAVRANIŞININ BELİRLENMESİ

DEMİRBAŞ M. D., ÇALIŞKAN U., SEVİM Ç., ekrikaya s.

IV. Ulusal Mühendislikte Bilimsel ve Mesleki Çalışmalar Kongresi (UMUH BILMES 2021), 23-26 Aralık 2021, TÜRKİYE, 23 - 26 December 2021, (Summary Text)

22. FİBER TAKVİYELİ KOMPOZİTLERİN HASAR TESPİTİNDE KATI VE KABUK SONLU ELEMAN KULLANIMI ETKİSİ: KATI ELEMAN İÇİN BOZUNUM MODELİ

ÇALIŞKAN U., APALAK M. K.

22. ULUSAL MEKANİK KONGRESİ, Adana, Turkey, 15 October 2021, (Full Text)

Other Publications 1

1. DAMAGE ANALYSIS OF LOW-VELOCITY IMPACT ON COMPOSITE SANDWICH PANELS USING 3D SOLID FINITE ELEMENT

ÇALIŞKAN U., APALAK M. K.

Technical Report, pp.1-10, 2017

Metrics

Publication

Publication (WoS)

Publication (Scopus)

Citation (WoS)

225

H-Index (WoS)

Citation (Scopus)

259

H-Index (Scopus)

Citation (Scholar)

303

H-Index (Scholar)

Project

Thesis Advisory

Open Access

UN Sustainable Development Goals

Publications & Works

Publication

Publication (WoS)

Publication (Scopus)

Citation (WoS)

H-Index (WoS)

Citation (Scopus)

H-Index (Scopus)

Citation (Scholar)

H-Index (Scholar)

Project

Thesis Advisory

Open Access