Chia seed mucilage widens the thermal processing window of GelMA biomaterial inks
International Journal of Bioprinting, cilt.12, sa.5, 2026 (SCI-Expanded, Scopus)
- Yayın Türü: Makale / Tam Makale
- Cilt numarası: 12 Sayı: 5
- Basım Tarihi: 2026
- Doi Numarası: 10.36922/ijb026330358
- Dergi Adı: International Journal of Bioprinting
- Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, BIOSIS, Natural Science Collection (ProQuest), Biological Science Database (ProQuest), Materials Science & Engineering Collection (ProQuest), Technology Collection (ProQuest)
- Anahtar Kelimeler: Blend biomaterial ink, Chia mucilage, Extrusion bioprinting, Gelatin methacryloyl, Percolation, Printability, Rheology, Thermal decoupling
- Açık Arşiv Koleksiyonu: AVESİS Açık Erişim Koleksiyonu
- Erciyes Üniversitesi Adresli: Evet
Özet
Extrusion printing of gelatin methacryloyl (GelMA) is hampered by the gelatin coil-helix transition near ambient temperature, which makes its viscosity steeply temperature-dependent. Here, microwave-synthesized GelMA (10% w/v; degree of methacrylation 81.9% by ¹H NMR) was physically blended with chia (Salvia hispanica L.) seed mucilage at 0.5%, 1%, and 2% (w/v) and photo-crosslinked with 0.3% (w/v) lithium phenyl-2,4,6-trimethylbenzoylphosphinate under 395–480 nm light. Chia mucilage decoupled ink viscosity from temperature. Between 15 °C and 45 °C, pristine GelMA lost a factor of 3,838 in viscosity and 63% per degree at the 30 °C print head, whereas the 1% and 2% blends lost only 49- and 41-fold overall and 32% and 15% per degree; the mucilage itself was nearly athermal. Mechanical reinforcement followed a threshold rather than a dose response: 0.5% chia did not significantly alter the compressive modulus of GelMA (42.6 ± 6.2 vs. 55.7 ± 5.8 kPa; p = 0.056), whereas 1% and 2% raised it 17.5- and 30.0-fold (974.8 ± 101.3 and 1,671.0 ± 173.8 kPa; p = 0.004). Scanning electron microscopy revealed a fibrous polysaccharide network that became continuous between 0.5% and 1% (w/v), consistent with rigidity percolation. Fourier-transform infrared spectroscopy indicated mucilage-gelatin hydrogen bonding, and X-ray diffraction showed that the mucilage remained amorphous. Optimal spreading ratios were 1.158, 1.164, and 1.016 for GelMA and the 1% and 2% blends, respectively. Chia mucilage thus widens the thermal processing window of GelMA at low cost. As no cell-laden printing was performed, these formulations are termed biomaterial inks.