Enhancing surface integrity and wear resistance of DMLS AlSi10Mg via ball burnishing


Bassoy G. U., ÇELİK M.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, cilt.40, sa.1, ss.609-617, 2026 (SCI-Expanded, Scopus)

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 40 Sayı: 1
  • Basım Tarihi: 2026
  • Doi Numarası: 10.1007/s12206-025-1251-9
  • Dergi Adı: JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Aerospace Database, Compendex, INSPEC, Academic Search Ultimate (EBSCO), Engineering Source (EBSCO), Materials Science & Engineering Collection (ProQuest), Technology Collection (ProQuest)
  • Sayfa Sayıları: ss.609-617
  • Erciyes Üniversitesi Adresli: Evet

Özet

This study investigates the enhancement of surface integrity and wear resistance in AlSi10Mg components manufactured via direct metal laser sintering (DMLS), utilizing a subsequent ball burnishing (BB) treatment. The effects of key process parameters-burnishing force, number of passes, and tool trajectory-on surface roughness and tribological characteristics were systematically investigated. The BB process led to a substantial reduction in surface roughness, with an average improvement of 78.15 %, and a maximum improvement ratio of surface roughness (IRSR) of 81.58 % achieved under optimal conditions (260 N force, two passes, spiral trajectory). In addition, the wear rate decreased by 42.39 %, indicating a significant enhancement in wear resistance, supported by reduced wear track widths and coefficients of friction. These enhancements are attributed to the formation of a strain-hardened surface layer and more uniform surface properties induced by the BB process. The study highlights ball burnishing as a highly effective finishing strategy to improve the mechanical performance of additively manufactured AlSi10Mg parts, enabling these parts to find wider use in high-performance and wear-critical engineering applications.