Pt/Pd coatings on nickel foam working electrodes for simultaneous biohydrogen production and wastewater treatment in microbial electrolysis cells


Baş F., Demirel S., KAYA M. F.

Journal of Cleaner Production, cilt.584, 2026 (SCI-Expanded, Scopus)

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 584
  • Basım Tarihi: 2026
  • Doi Numarası: 10.1016/j.jclepro.2026.149909
  • Dergi Adı: Journal of Cleaner Production
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Chimica, Compendex, INSPEC, Public Affairs Index, Academic Search Ultimate (EBSCO), Business Source Ultimate (EBSCO), Engineering Source (EBSCO)
  • Anahtar Kelimeler: Bio-hydrogen production, Hydrothermal coating, Microbial electrolysis cells, Nickel-foam, Wastewater treatment
  • Erciyes Üniversitesi Adresli: Evet

Özet

Electrodes play a key role in microbial electrolysis cell (MEC), and the material composition, geometries, physicochemical properties, and surface morphologies of the electrodes directly determine energy conversion efficiency, energy consumption, hydrogen production, microbial stability, and wastewater treatment performance. In this study, a two-chambered MEC, cheese whey wastewater (CW), nickel foam (NiF) as the working electrode were used. A comprehensive set of electrochemical and surface characterization techniques was conducted, including linear sweep voltammetry (LSV), electrochemical impedance spectroscopy (EIS), Tafel, field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDX), and X-ray diffraction (XRD), together with wastewater quality parameter and biohydrogen production rate measurements. To improve catalytic behavior, NiF were modified with Pt/Pd using electroplating and hydrothermal coating methods. Among all configurations, the hydrothermally Pt coated electrode (NiF-Pt-H) demonstrated the highest overall performance. NiF-Pt-H provided up to 124% higher electrical conductivity, nearly 99% reduction in charge transfer and diffusion resistance, up to 43% faster hydrogen production, 4212% increase in C dl and electrochemically active surface area (ECSA), corrosion resistance improved by 135%, almost complete removal of major wastewater contaminants (COD, NH4+) approximately 99%. Surface characterization results confirmed a uniform distribution of noble metal species throughout the porous structure, which explains the observed improvements in electrochemical stability, catalytic activity, and mass transport behavior. These findings show that NiF working electrodes are a highly effective strategy for achieving simultaneous high efficiency biohydrogen production and advanced wastewater treatment in MEC. The proposed electrode architecture offers strong potential for scalable and sustainable waste to energy conversion technologies.