Experimental comparison of the performance of nanofluids, cryogenic and hybrid cooling in turning of Inconel 625

Yıldırım Ç. V.

TRIBOLOGY INTERNATIONAL, cilt.137, ss.366-378, 2019 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 137
  • Basım Tarihi: 2019
  • Doi Numarası: 10.1016/j.triboint.2019.05.014
  • Dergi Adı: TRIBOLOGY INTERNATIONAL
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.366-378
  • Anahtar Kelimeler: Liquid nitrogen, Cryogenic cooling, Nanofluid, Hybrid cooling, MINIMUM QUANTITY LUBRICATION, BORON-NITRIDE PARTICLES, SURFACE-ROUGHNESS, TOOL WEAR, CUTTING FLUIDS, TITANIUM-ALLOY, TRIBOLOGICAL PERFORMANCE, METALWORKING FLUIDS, TAGUCHI METHOD, MQL
  • Erciyes Üniversitesi Adresli: Evet

Özet

In this study, it is purposed to examine the effect of some cooling conditions on the machinability which may be an alternative to conventional cooling. For this purpose, experiments were conducted. During these experiments, dry, minimum quantity lubrication, nanofluids, cryogenic cooling and combinations with these cooling methods were preferred as cooling method. For nanofluids, hBN and Al2O3 were used as additives while LN2 was preferred for cryogenic cooling. Tool wear, tool-chip interface temperature and surface roughness were selected as evaluation characteristics. The experiment results showed that 0.5 vol% hBN cooling method used in conjunction with liquid nitrogen gave the best results in terms of machining performance.