An on-line preconcentration/separation system for the determination of bismuth in environmental samples by FAAS


ŞAHAN S., SAÇMACI Ş., ŞAHİN U., ÜLGEN A., KARTAL Ş.

TALANTA, cilt.80, sa.5, ss.2127-2131, 2010 (SCI-Expanded) identifier identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 80 Sayı: 5
  • Basım Tarihi: 2010
  • Doi Numarası: 10.1016/j.talanta.2009.11.019
  • Dergi Adı: TALANTA
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.2127-2131
  • Anahtar Kelimeler: Bismuth, On-line preconcentration, Lewatit TP-207, ATOMIC-ABSORPTION-SPECTROMETRY, SOLID-PHASE EXTRACTION, DIRECT SPECTROPHOTOMETRIC DETERMINATION, STRIPPING VOLTAMMETRIC DETERMINATION, FLOW-INJECTION DETERMINATION, PHARMACEUTICAL PRODUCTS, WATER SAMPLES, CHROMOGENIC REAGENT, CHEMICAL MODIFIERS, TRACE AMOUNTS
  • Erciyes Üniversitesi Adresli: Evet

Özet

An on-line preconcentration procedure for the determination of bismuth by flame atomic absorption spectrometry (FAAS) has been described Lewatit TP-207 chelating resin, including immodiacetate group, packed in a minicolumn was used as adsorbent material Bi(III) was sorbed on the chelating resin, from which it could be eluted with 3 mol L-1 HNO3 and then introduced directly to the nebulizer-burner system of FAAS. Best preconcentration conditions were established by testing different resin quantities, acidity of sample, types of eluent, sample and eluent solution volumes, adsorption and elution flow rates, and effect of interfering ions The detection limit of the method was 2 75 mu g L-1 while the relative standard deviation was 3.0% for 0.4 mu g mL(-1) Bi(III) concentration. The developed method has been applied successfully to the determination of bismuth in pharmaceutical cream, standard reference materials and various natural water samples with satisfactory results. (C) 2009 Elsevier B V. All rights reserved