A comparative experimental investigation of concrete, reinforced-concrete and steel-fibre concrete pipes under three-edge-bearing test


Haktanir T., Ari K., Altun F., Karahan O.

CONSTRUCTION AND BUILDING MATERIALS, cilt.21, sa.8, ss.1702-1708, 2007 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 21 Sayı: 8
  • Basım Tarihi: 2007
  • Doi Numarası: 10.1016/j.conbuilmat.2006.05.031
  • Dergi Adı: CONSTRUCTION AND BUILDING MATERIALS
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.1702-1708
  • Anahtar Kelimeler: concrete pipes, reinforced-concrete pipes, steel-fibre concrete pipes, three-edge-bearing strength, crack characteristics
  • Erciyes Üniversitesi Adresli: Evet

Özet

Three-edge-bearing and crack size measurement tests were carried out on plain concrete, reinforced -concrete, and steel-fibre concrete pipes of 500 mm diameters. The average three-edge-bearing strength and crack size of steel-fibre concrete pipes having steel fibres of RC80/60-BN type at a dosage of 25 kg/m(3) turned out to be 82% greater and 47% smaller than those of plain concrete pipes, and 6% greater and 15% smaller than those of reinforced-concrete pipes, respectively. Tests on those steel-fibre concrete pipes having a steel fibres dosage of 40 kg/m(3) revealed that a steel fibres dosage of 25 kg/m(3) seems to be close to optimum because a 60% increase in the amount of steel fibres engenders only minor improvements. By these findings, steel-fibre concrete pipes are more economical than and mechanically and physically superior to reinforced-concrete pipes. (c) 2006 Elsevier Ltd. All rights reserved.