Strength properties of slag/fly ash blends activated with sodium metasilicate


Creative Commons License

LUGA E., ATİŞ C. D. , KARAHAN O., İLKENTAPAR S., Gorur E. B.

GRADEVINAR, vol.69, no.3, pp.199-205, 2017 (SCI-Expanded) identifier

  • Publication Type: Article / Article
  • Volume: 69 Issue: 3
  • Publication Date: 2017
  • Doi Number: 10.14256/jce.1468.2015
  • Journal Name: GRADEVINAR
  • Journal Indexes: Science Citation Index Expanded (SCI-EXPANDED)
  • Page Numbers: pp.199-205
  • Keywords: ground-granulated blast furnace slag, fly ash, geopolymer, sodium metasilicate, F FLY-ASH, ALKALI ACTIVATION, CURING CONDITIONS, DRYING SHRINKAGE, CONCRETE, HYDRATION, MORTAR, CEMENT
  • Erciyes University Affiliated: Yes

Abstract

The alkali activation of mortar blends containing Ground Granulated Blast Furnace Slag and Fly Ash, with activation based on sodium metasilicate, is investigated in this study. Two series are investigated, and compressive strength is measured. The results of the first series show that the compressive strength decreases considerably with a decrease in the slag and fly ash ratio. The 3-day compressive strength of mortar cured at the temperature of 100 degrees C increases slightly up to the ratio of 60/40, but decreases considerably at the 40/60 ratio.