The influence of aggregate type on the strength and abrasion resistance of high strength concrete


KILIÇ A. M., Atis C. D., Teymen A., KARAHAN O., Özcan F., Bilim C., ...Daha Fazla

CEMENT & CONCRETE COMPOSITES, cilt.30, sa.4, ss.290-296, 2008 (SCI-Expanded) identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 30 Sayı: 4
  • Basım Tarihi: 2008
  • Doi Numarası: 10.1016/j.cemconcomp.2007.05.011
  • Dergi Adı: CEMENT & CONCRETE COMPOSITES
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.290-296
  • Anahtar Kelimeler: aggregate types, concrete, strength, abrasion, COARSE-AGGREGATE, MECHANICAL-PROPERTIES, COMPRESSIVE STRENGTH
  • Erciyes Üniversitesi Adresli: Evet

Özet

This paper examines the influence of aggregate type on the strength characteristics and abrasion resistance of high strength silica fume concrete. Five different aggregate types (gabbro, basalt, quartsite, limestone and sandstone) were used to produce high strength concrete containing silica fume. Silica fume replacement ratio with cement was 15% on a mass basis. Water-binder ratio was 0.35. The amount of hyperplasticizer was 4% of the binder content by mass. Gabbro concrete showed the highest compressive and flexural tensile strength and abrasion resistance, while sandstone showed the lowest compressive and flexural tensile strength and abrasion resistance. High abrasion resistant aggregate produced a concrete with high abrasion resistance.