Assoc. Prof.MUNİSE DİDEM DEMİRBAŞ


Mühendislik Fakültesi, Makina Mühendisliği

Mekanik


Research Areas: Technical Sciences, Mechanical Engineering, Mechanical, Solid Mechanics, Continuous Mechanics, Thermodynamics, Heat and Mass Transfer, Metallurgical and Materials Engineering, Material science and engineering, Composites

Metrics

Publication

51

Citation (WoS)

88

H-Index (WoS)

6

Citation (Scopus)

49

H-Index (Scopus)

4

Project

9

Open Access

4
UN Sustainable Development Goals

Education Information

2019 - Continues

2019 - Continues

Post Doctorate

Politecnico di Torino, Engineering Faculty, Aerospace Engineering Department, Italy

2009 - 2012

2009 - 2012

Doctorate

Erciyes University, Fen Bilimleri Enstitüsü, Makine Mühendisliği, Turkey

2006 - 2009

2006 - 2009

Postgraduate

Erciyes University, Fen Bilimleri Enstitüsü, Makine Mühendisliği, Turkey

2004 - 2007

2004 - 2007

Undergraduate Double Major

Erciyes University, Fen- Edebiyat Fakültesi, Matematik, Turkey

2001 - 2006

2001 - 2006

Undergraduate

Erciyes University, Mühendislik Fakültesi, Makine Mühendisliği, Turkey

Dissertations

2012

2012

Doctorate

Düzlem İçi Isıl Yüke Maruz İki Yönlü İşlevsel Kademelendirilmiş Dörtgen Ve Dairesel Plakaların Isıl Gerilme Analizi

Erciyes Üniversitesi, Fen Bilimleri Enstitüsü, Makine Mühendisliği

2009

2009

Postgraduate

Düzlem İçi Isıl Yüke Maruz Tek Yönlü İşlevsel Kademelendirilmiş Plaka ve Disk Bağlantılarının Isıl Gerilme Analizi

Erciyes Üniversitesi, Fen Bilimleri Enstitüsü, Makine Mühendisliği

Certificates, Courses and Trainings

2010

2010

Yabancı Dil

Education Management and Planning

Deulcom International

2009

2009

Yabancı Dil

Foreign Language

International

2009

2009

Yabancı Dil

Foreign Language

Özel Balkaya Yabancı Dil Kursu

Research Areas

Technical Sciences

Mechanical Engineering

Mechanical

Solid Mechanics

Continuous Mechanics

Thermodynamics

Heat and Mass Transfer

Metallurgical and Materials Engineering

Material science and engineering

Composites

Academic Titles / Tasks

2019 - Continues

2019 - Continues

Associate Professor

Erciyes University, Mühendislik Fakültesi, Makina Mühendisliği

2019 - Continues

2019 - Continues

Other

Politecnico di Torino, Engineering Faculty, Aerospace Engineering Department

2013 - 2019

2013 - 2019

Assistant Professor

Erciyes University, Mühendislik Fakültesi, Makine Mühendisliği

2010 - 2013

2010 - 2013

Lecturer

Erciyes University, Mühendislik Fakültesi, Makine Mühendisliği

2009 - 2010

2009 - 2010

Lecturer

Kahramanmaras Sutcu Imam University, Kahramanmaraş Vocatıonal School, Makine

2007 - 2009

2007 - 2009

Other

Erciyes University, Mühendislik Fakültesi, Makine Mühendisliği

Non Academic Experience

2006 - 2007

2006 - 2007

Business Establishment Private

Courses

Undergraduate

Undergraduate

kinematik

Undergraduate

Undergraduate

Mukavemet-I

Undergraduate

Undergraduate

Mukavemet-II

Undergraduate

Undergraduate

Diferansiyel Denklemler

Undergraduate

Undergraduate

Fizik-1

Undergraduate

Undergraduate

Yüksek Matematik-I

Undergraduate

Undergraduate

Yüksek Matematik-II

Undergraduate

Undergraduate

Statik

Undergraduate

Undergraduate

Genel Matematik-1

Published journal articles indexed by SCI, SSCI, and AHCI

2021

2021

Evaluation of the bending response of compact and thin-walled FG beams with CUF

DEMİRBAŞ M. D. , ÇALIŞKAN U., Xu X., Filippi M.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, vol.28, no.17, pp.1755-1764, 2021 (SCI-Expanded) identifier identifier

2019

2019

Thermal stress analysis of one- and two-dimensional functionally graded plates subjected to in-plane heat fluxes

Demirbaş M. D. , Apalak M. K.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, vol.233, pp.546-562, 2019 (SCI-Expanded) identifier identifier

2018

2018

Investigation of the Thermo-elastic Response of Adhesively Bonded Two-Dimensional Functionally Graded Circular Plates Based on Theory of Elasticity

DEMİRBAŞ M. D. , APALAK M. K.

IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF MECHANICAL ENGINEERING, vol.42, no.4, pp.415-433, 2018 (SCI-Expanded) identifier identifier

2018

2018

Dual-axis buckling of laminated composite skew hyperbolic paraboloids with openings

Chaubey A. K. , Jha I., Kumar A., DEMİRBAŞ M. D. , Dey S.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, vol.40, no.10, 2018 (SCI-Expanded) identifier identifier

2018

2018

Thermal stress analysis of in-plane two-directional functionally graded plates subjected to in-plane edge heat fluxes

APALAK M. K. , DEMİRBAŞ M. D.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, vol.232, no.8, pp.693-716, 2018 (SCI-Expanded) identifier identifier

2015

2015

Thermal residual stresses in in-plane functionally graded clamped hollow circular plates subjected to an edge heat flux

APALAK M. K. , DEMİRBAŞ M. D.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, vol.229, no.3, pp.236-260, 2015 (SCI-Expanded) identifier identifier

2013

2013

Thermal residual stresses in adhesively bonded in-plane functionally graded clamped circular hollow plates

APALAK M. K. , DEMİRBAŞ M. D.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, vol.27, no.14, pp.1590-1623, 2013 (SCI-Expanded) identifier identifier

2011

2011

THERMAL RESIDUAL STRESSES IN ONE-DIRECTIONAL FUNCTIONALLY GRADED PLATES SUBJECTED TO IN-PLANE HEAT FLUX

Bagci M. D. , APALAK M. K.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, vol.60, no.1, pp.50-83, 2011 (SCI-Expanded) identifier identifier

Articles Published in Other Journals

2019

2019

Modelling of One-directional Functionally Graded Circular Plates withArtificial Neural Network

DEMİRBAŞ M. D. , Çakır D.

International Scientific and Vocational Studies Journal, vol.3, no.1, pp.42-50, 2019 (Peer-Reviewed Journal)

2019

2019

Thermal Stress Analysis in Two-Directional Functionally Graded Plates with Artificial Neural Network Training Algorithms

DEMİRBAŞ M. D. , Çakır D.

Uluslararası Muhendislik Arastirma ve Gelistirme Dergisi, vol.11, pp.442-450, 2019 (Peer-Reviewed Journal)

2018

2018

Thermal residual stresses analyses of two-dimensional functionally graded circular plates with temperature-dependent material properties

DEMİRBAŞ M. D. , APALAK M. K.

Uluslararası Muhendislik Arastirma ve Gelistirme Dergisi, vol.10, pp.202-213, 2018 (Peer-Reviewed Journal) Creative Commons License

2018

2018

Thermal Stress Analysis of Functionally Graded Modulus Adhesive Joints

DEMİRBAŞ M. D. , APALAK M. K.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, vol.21, no.2, pp.445-456, 2018 (ESCI) Creative Commons License identifier

2018

2018

Equivalent stress analysis of functionally graded rectangular plates by genetic programming

DEMİRBAŞ M. D. , Çakır D., Arslan S., ÖZTÜRK C.

International Scientific and Vocational Studies Journal, vol.2, no.1, pp.67-80, 2018 (Peer-Reviewed Journal)

2018

2018

Thermal stress control in functionally graded plates with artificial neural network

DEMİRBAŞ M. D. , Çakır D.

International Scientific and Vocational Studies Journal, vol.2, no.1, pp.39-55, 2018 (Peer-Reviewed Journal)

2018

2018

Numerical solution of thermal residual stress analysis with finite difference method of functionally graded circular plates

DEMİRBAŞ M. D. , APALAK M. K.

Uluslararası Muhendislik Arastirma ve Gelistirme Dergisi, vol.10, pp.172-181, 2018 (Peer-Reviewed Journal) Creative Commons License

2017

2017

Thermal stress analysıs with finite difference method of functionally graded circular plates

DEMİRBAŞ M. D. , APALAK M. K.

International Journal of Mechanical And Production Engineering,, vol.5, pp.73-79, 2017 (Peer-Reviewed Journal)

Refereed Congress / Symposium Publications in Proceedings

2021

2021

Large-deflection analysis of composite and FGM thin-walled beams under thermal pre-stresses

Filippi M., Augello R., Demirbaş M. D. , Carrera E.

MECHCOMP7-7th International Conference on Mechanics of Composites, Porto, Portugal, 1 - 03 September 2021, pp.26-27 Sustainable Development

2021

2021

Fonksiyonel Olarak Kademelendirilmiş ABS Ve PLA’nın Mekanik Meta Malzeme Davranışının Belirlenmesi

Demirbaş M. D. , Çalışkan U., Sevim Ç., Ekrikaya S.

IV. Ulusal Mühendislikte Bilimsel ve Mesleki Çalışmalar Kongresi (UMUH BILMES 2021), 23-26 Aralık 2021, TÜRKİYE, Tokat, Turkey, 23 - 26 December 2021, pp.9

2021

2021

INVESTIGATION OF BENDING BEHAVIOR OF CANTILEVER SQUARE BEAMS WITH CUF

Demirbaş M. D. , Carrera E.

VI. International Scientific and Vocational Studies Congress – Engineering (BILMES EN 2021), Tokat, Turkey, 23 - 26 November 2021, pp.8

2021

2021

Evaluation of stress distributions in the geometrical nonlinear regime of composite and FG structures by means of CUF

Demirbaş M. D. , Augello R., Xian Yang, X., Carrera E.

MECHCOMP7 - 7th International Conference on Mechanics of Composites, Porto, Portugal, 1 - 03 September 2021, pp.29

2019

2019

Assessments on Stress Evaluations in Compact, Thin-Walled,FGM and Laminated Beams

DEMİRBAŞ M. D. , CARRERA E., PETROLO M.

2nd International Conference of Mechanics of Advanced Materials and Structures (ICMAMS 2019), Nanjing, China, 19 - 22 October 2019

2019

2019

Equivalent Stress Model in Functional GradedCircular Plates Created by Artificial NeuralNetwork

DEMİRBAŞ M. D. , Çakır D.

SCIENTIFIC AND VOCATIONAL STUDIES CONGRESSES (BILMES 2019), Nevşehir, Turkey, 27 - 29 June 2019

2018

2018

Thermal stress analysis in two-directional functionally graded plates with artificial neural network

DEMİRBAŞ M. D. , Çakır D.

3rd International Mediterranean Science and Engineering Congress (IMSEC 2018), Adana, Turkey, 24 - 26 October 2018, no.1, pp.30

2017

2017

Thermal stress analysis with finite difference method of functionally graded circular plates

DEMİRBAŞ M. D. , APALAK M. K.

70th International Conference on Mechanical and Aerospace Engineering (ICMAE), Madrid, Spain, 23 - 24 August 2017, pp.18-24

2018

2018

Heat transfer analyses of in-plane functionally graded hollow circular plates with two numerical methods

DEMİRBAŞ M. D. , EKİCİ R., APALAK M. K.

II. International Scientific and Vocational Studies Congress (BILMES 2018), Nevşehir, Turkey, 5 - 08 July 2018, pp.555-556

2018

2018

Thermal-stress analyses of in-plane functionally graded hollow circular plates with finite element and finite difference methods

DEMİRBAŞ M. D. , EKİCİ R., APALAK M. K.

II. International Scientific and Vocational Studies Congress (BILMES 2018), Nevşehir, Turkey, 5 - 08 July 2018, pp.557-558

2018

2018

Equivalent stress analysis of functionally graded plates by genetic programming

DEMİRBAŞ M. D. , ÖZTÜRK C., Arslan S., Çakır D.

II. International Scientific and Vocational Studies Congress (BILMES 2018), Nevşehir, Turkey, 5 - 08 July 2018, pp.553-554

2018

2018

Effects of temperature-dependent material properties on thermo-mechanical analysis of in-plane two-dimensional functionally graded circular plates

DEMİRBAŞ M. D. , APALAK M. K.

First International Conference on Mechanics of Advanced Materials and Structures (ICMAMS), Torino, Italy, 17 - 20 June 2018, pp.1

2018

2018

Thermal residual stress analysis of two-dimensional functionally graded plates with finite element and finite difference methods

DEMİRBAŞ M. D. , EKİCİ R., APALAK M. K.

4th International Conference on Engineering and Natural Sciences (ICENS), KİEV, Ukraine, 2 - 06 May 2018, pp.85

2018

2018

Heat transfer analysis of two-dimensional functionally graded rectangular plates with two numerical methods

DEMİRBAŞ M. D. , EKİCİ R., APALAK M. K.

4th International Conference on Engineering and Natural Sciences (ICENS), KİEV, Ukraine, 2 - 06 May 2018, pp.84

2018

2018

Advantages and disadvantages of hybrid composites according to traditional composites

DEMİRBAŞ M. D. , Erdoğan Ö.

II. International Vocational Science Symposium, Antalya, Turkey, 26 - 29 April 2018, pp.279

2018

2018

Production parameters and characterization of hybrid composites

DEMİRBAŞ M. D. , Erdoğan Ö.

II. International Vocational Science Symposium, Antalya, Turkey, 26 - 29 April 2018, pp.280

2017

2017

Thermal residual stresses analyses of one-dimensional functionally graded circular plates

DEMİRBAŞ M. D. , APALAK M. K.

I. International Scientific and Vocational Studies Congress, Nevşehir, Turkey, 5 - 08 October 2017, pp.386

2017

2017

Heat transfer analyses of one-dimensional functionally graded plates

DEMİRBAŞ M. D. , APALAK M. K.

I. International Scientific and Vocational Studies Congress, 5 - 08 October 2017, pp.387

2017

2017

Heat transfer analysis of functionally graded materials with two numerical methods

Demirbaş M. D. , Ekici R., Apalak M. K.

9th International Conference on Tribology (Balkan Trib'17), Nevşehir, Turkey, 13 - 15 September 2017, pp.595-600

2017

2017

Comparison of thermal-stress analysis of functionally graded rectangular plates with finite element and finite difference methods

Demirbaş M. D. , Ekici R., Apalak M. K.

9th International Conference on Tribology (Balkan Trib'17), Nevşehir, Turkey, 13 - 15 September 2017, pp.601-609

2017

2017

Heat transfer analysis of the circular plates with finite difference method

DEMİRBAŞ M. D. , APALAK M. K.

1th International Conference on Applied Analysis and Mathematical Modeling (ICAAMM2017), İstanbul, Turkey, 3 - 07 June 2017, pp.1

2016

2016

The Thermal Stress Analysis of One- and Two-Dimensional Functionally Graded Circular Plates for In-Plane Sinusoidal Heat Flux

DEMİRBAŞ M. D. , APALAK M. K.

İNTERNATİONAL CONFERENCE ON ENGİNEERİNG AND NATURAL SCİENCE, Saray Bosna, Bosnia And Herzegovina, 24 - 28 May 2016, pp.1-5

2014

2014

IN-PLANE THERMAL RESIDUAL STRESSES IN FUNCTIONALLY GRADED PLATES

APALAK M. K. , DEMİRBAŞ M. D.

12th ASME Biennial Conference on Engineering Systems Design and Analysis (ESDA2014), Copenhagen, Denmark, 25 - 27 June 2014 identifier identifier

2014

2014

IN-PLANE THERMAL RESIDUAL STRESSES IN ADHESIVELY BONDED FUNCTIONALLY GRADED PLATES

APALAK M. K. , DEMİRBAŞ M. D.

The sixteenth European Conference for Composite Materials (ECCM16), Seville, Spain, 22 - 26 June 2014, pp.1-10

Supported Projects

2021 - 2022

2021 - 2022

HİBRİT KOMPOZİTLERİN TERMO-MEKANİK ÖZELLİKLERİNİN İNCELENMESİ

Project Supported by Higher Education Institutions

DEMİRBAŞ M. D. (Executive), ERDOĞAN Z.

Awards

October 2012

October 2012

Bilimsel Yayın Onur Ödülü

Erciyes Üniversitesi

June 2011

June 2011

Uluslararası Yayın Teşvik Ödülü

TÜBITAK

June 2006

June 2006

Bölüm İkinciliği

Erciyes Üniversitesi



Citations

Total Citations (WOS): 88

h-index (WOS): 6